Vampire 500+ Pre-orders now being accepted - Page 8

Marchie · 21 April 2017, 03:23

Keen for that A2000 CPU socket adapter, any more info on these and where/how we get them?

NovaCoder · 21 April 2017, 03:42

Quote:

Originally Posted by Marchie

Keen for that A2000 CPU socket adapter, any more info on these and where/how we get them?

http://www.kipper2k.com/

grelbfarlk · 21 April 2017, 04:03

Quote:

Originally Posted by Marchie

Keen for that A2000 CPU socket adapter, any more info on these and where/how we get them?

I have the A2000 CPU slot adapter but don't use it.

Unless something has changed that I am not aware of the A2000 CPU slot adapter isn't really necessary. The V500 fits with a DKB Megachip just fine in the 68000 socket. Unless the A2000 CPU slot adapter has changed it actually is less convenient than just plugging the V500 into the 68000 slot since the HDMI cable aimed straight up and I couldn't close the case unless I found an HDMI cable with a shorter connector. The HDMI cable being under the drive/power supply rail may not be ideal for some people either but I prefer it.

The SD slot was easier to access. The biggest thing the V500 seemed a little more buggy before but I attribute that to my very tired and beaten up A2000.

Maybe it's more of a preference thing, some people want it in the proper CPU slot or there have been new developments that the unused pads on the CPU slot adapter have been populated with caps that make it run better than with the bare board.

Or if you are removing/reinstalling a lot it's easier with the CPU slot than with the 68000 socket.

Marchie · 21 April 2017, 06:15

Yeah, my 68k socket has seen a lot of battery damage/repair and while the system seems to be solid, I'd rather leave it be and use the CPU slot since it's there.

NovaCoder - thanks for the link, I'm aware of Kipper2k's website but haven't seen any listing or info about the adapter (apart from the the image linked above) unless I'm not seeing the obvious (wouldn't be the first time)? I had been assuming he's pretty busy distributing V600's in any case, and didn't want random emails (not that I can see an email on the website either, although there's a link to the IRC chat).

NovaCoder · 21 April 2017, 06:48

Quote:

Originally Posted by Marchie

NovaCoder - thanks for the link, I'm aware of Kipper2k's website but haven't seen any listing or info about the adapter (apart from the the image linked above) unless I'm not seeing the obvious (wouldn't be the first time)? I had been assuming he's pretty busy distributing V600's in any case, and didn't want random emails (not that I can see an email on the website either, although there's a link to the IRC chat).

I think he'll probably add them to his online store sooner or later.

jack-3d · 21 April 2017, 13:01

Quote:

Originally Posted by Omolungo

Vampire adapters (there's also the one for CDTV

)

http://www.kipper2k.com/newbits.jpg

Good, tried to reach Kipper about A2000 Vampire adapter two times by e-mail without response. Hopefully he will be able to send bunch of A2000 adapters to Czech, because I know about other 5 friends who wants it too.

Omolungo · 05 May 2017, 11:21

Quote:

Originally Posted by grelbfarlk

Talking to a member of the Vampire team, one of them wants to play with getting the V500 working with the CDTV ROMs. If someone has a CDTV or even an A570 that they would consider offering to the team let me know and I'll put you in touch with the person inquiring.

A CDTV it's now on the way for Canada.
Fingers crossed

mattsoft · 06 May 2017, 04:42

Vampire 500+ arrived here in Seattle! Huzzah!

Magic · 06 May 2017, 04:46

Quote:

Originally Posted by mattsoft

Vampire 500+ arrived here in Seattle! Huzzah!

Awesome that means mine will be landing in Edmonds soon YEAH

Sinphaltimus · 08 May 2017, 12:50

It's my understanding that the Vampire A500+ does not include a CF card reader AND you cannot boot from the micro SD or a GVP SCSI controller with the Vampire board attached. Can any of you recommend the proper IDE CF card adaptor that you use with it? I'm expecting my Vampire board to arrive any day/week now and would like to prepare for it.

Samurai_Crow · 08 May 2017, 13:05

Quote:

Originally Posted by Sinphaltimus

It's my understanding that the Vampire A500+ does not include a CF card reader AND you cannot boot from the micro SD or a GVP SCSI controller with the Vampire board attached. Can any of you recommend the proper IDE CF card adaptor that you use with it? I'm expecting my Vampire board to arrive any day/week now and would like to prepare for it.

A $5USD CF to female IDE imported from China will do the job nicely. There are likely to be more problems with the CF card itself than the adapter.

Sinphaltimus · 08 May 2017, 14:39

Quote:

Originally Posted by Samurai_Crow

A $5USD CF to female IDE imported from China will do the job nicely. There are likely to be more problems with the CF card itself than the adapter.

That's great to hear. I have a good cf card I haven't touched in years. Was used on my PSP. I guess I need to find an adaptor with the correct angled connection next.

Much appreciated...

Is 44 pin correct?

grond · 08 May 2017, 14:54

Yes, 44 pin. I use an SD-CF adapter in my CF-IDE adapter. No problems whatsoever and much cheaper media.

Sinphaltimus · 08 May 2017, 15:04

Quote:

Originally Posted by grond

Yes, 44 pin. I use an SD-CF adapter in my CF-IDE adapter. No problems whatsoever and much cheaper media.

Great idea, thanks! I've also seen cf to sata hdd adaptors. Wondering if those would work, I'm pretty sure they need external power.

Sinphaltimus · 12 May 2017, 23:13

Has anyone ever tried to give this a go? Using it instead of the CF card reader.

It appears as though this would allow connecting a sata HDD to the 44 pin ide port of the vampire board. My concern would be hdd power from the vampire board.

https://www.amazon.com/dp/B01M9FXN8I...a-308935530605

Mr.Flibble · 12 May 2017, 23:27

I've got one of those but I've not tried it yet, I've also an IDE44 to msata ssd adaptor which might also work pretty well.

Omolungo · 13 May 2017, 14:52

First image of Vampire V500 inside a CDTV with 68000 adapter: V500 fits well and it is possible close the lid

Work in progress

talybont · 27 May 2017, 16:53

Has anyone mounted a HDMI connector on the original A500 case? I'm looking on eBay for a cable that will plug into the Vampire with a panel mount HDMI connector on the other end, but would like to see the result if anyone has already done this.

Retrofan · 27 May 2017, 22:09

Just a question:

Will Amigakit sell Vampires in a near future?

wawa · 28 May 2017, 10:46

Quote:

Will Amigakit sell Vampires in a near future?

what for?

13 May 2017, 14:52	#157
Omolungo Registered User Join Date: Nov 2009 Location: Livorno, Italy Posts: 398	First image of Vampire V500 inside a CDTV with 68000 adapter: V500 fits well and it is possible close the lid Work in progress Attached Thumbnails

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Amiga 500 Vampire is alive	kipper2k	support.Hardware	397	15 June 2017 16:44
Amiga 500 Vampire	Signman	Amiga scene	50	25 November 2016 12:41
Vampire 500 project started	majsta	Hardware mods	221	17 August 2016 18:42
How to (Pre)Order a Vampire II	tygre	support.Hardware	3	25 March 2016 16:18
History of Ocean Book - pre-orders now being taken	boyo	Retrogaming General Discussion	39	06 February 2014 10:07

21 April 2017, 03:23	#141
Marchie Registered User Join Date: Jul 2016 Location: Sydney / London Posts: 589	Keen for that A2000 CPU socket adapter, any more info on these and where/how we get them?

21 April 2017, 06:15	#144
Marchie Registered User Join Date: Jul 2016 Location: Sydney / London Posts: 589	Yeah, my 68k socket has seen a lot of battery damage/repair and while the system seems to be solid, I'd rather leave it be and use the CPU slot since it's there. NovaCoder - thanks for the link, I'm aware of Kipper2k's website but haven't seen any listing or info about the adapter (apart from the the image linked above) unless I'm not seeing the obvious (wouldn't be the first time)? I had been assuming he's pretty busy distributing V600's in any case, and didn't want random emails (not that I can see an email on the website either, although there's a link to the IRC chat).

06 May 2017, 04:42	#148
mattsoft Registered User Join Date: Dec 2016 Location: Seattle, WA Posts: 89	Vampire 500+ arrived here in Seattle! Huzzah!

08 May 2017, 12:50	#150
Sinphaltimus Registered User Join Date: Aug 2016 Location: Cresco, PA, USA Age: 53 Posts: 1,126	It's my understanding that the Vampire A500+ does not include a CF card reader AND you cannot boot from the micro SD or a GVP SCSI controller with the Vampire board attached. Can any of you recommend the proper IDE CF card adaptor that you use with it? I'm expecting my Vampire board to arrive any day/week now and would like to prepare for it.

08 May 2017, 14:54	#153
grond Registered User Join Date: Jun 2015 Location: Germany Posts: 1,918	Yes, 44 pin. I use an SD-CF adapter in my CF-IDE adapter. No problems whatsoever and much cheaper media.

12 May 2017, 23:13	#155
Sinphaltimus Registered User Join Date: Aug 2016 Location: Cresco, PA, USA Age: 53 Posts: 1,126	Has anyone ever tried to give this a go? Using it instead of the CF card reader. It appears as though this would allow connecting a sata HDD to the 44 pin ide port of the vampire board. My concern would be hdd power from the vampire board. https://www.amazon.com/dp/B01M9FXN8I...a-308935530605

12 May 2017, 23:27	#156
Mr.Flibble Registered User Join Date: Jun 2015 Location: UK Posts: 472	I've got one of those but I've not tried it yet, I've also an IDE44 to msata ssd adaptor which might also work pretty well.

27 May 2017, 16:53	#158
talybont Registered User Join Date: Oct 2016 Location: Norway Posts: 170	Has anyone mounted a HDMI connector on the original A500 case? I'm looking on eBay for a cable that will plug into the Vampire with a panel mount HDMI connector on the other end, but would like to see the result if anyone has already done this.

27 May 2017, 22:09	#159
Retrofan Ruler of the Universe Join Date: Mar 2010 Location: Lanzarote/Spain Posts: 6,185	Just a question: Will Amigakit sell Vampires in a near future?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)