Problem when creating a new hard drive

03 July 2008, 17:23

Hi.

here is my problem (winuae 1.5.0 on notebook Asus F3j Series, XP sp3):

when creating a new uae config , i've created an hard drive (from a directory) :

parameters :

Device Name : Dh0 Read/write : yes Bootable : yes
Volume Label : Work
path : d:\programmes\winuae\HD\system

then saving my config, booting and installing wb3.1 on this hard drive.

I'm closing Winuae then reloading my config and the WB says : no disk in drive DH0

when i take a look to the HD config, I see :

Device name : DH0 read/write : yes Bootable : yes
Volume label :
Path : work: D:\programmes\winuae\HD\system

problem while recording the config ?

Thanks for your Help

Xain

Toni Wilen · 03 July 2008, 19:00

Could you check the configuration file? Line that begins with "filesystem2".

04 July 2008, 12:06

Hi Toni.

Here is the line :

filesystem2=rw,dh0::Work: D:\Programmes\Winuae\HD\System,0

(no space between Work: and D:\)

Toni Wilen · 04 July 2008, 12:17

Device name needs to be "dh0", not "dh0:" (I guess it should not confuse configuration but it does.. probably since the beginning.. will be fixed)

04 July 2008, 13:14

Yes ! it's works now.

Thanks a lot.

03 July 2008, 17:23	#1
xain Posts: n/a	Problem when creating a new hard drive Hi. here is my problem (winuae 1.5.0 on notebook Asus F3j Series, XP sp3): when creating a new uae config , i've created an hard drive (from a directory) : parameters : Device Name : Dh0 Read/write : yes Bootable : yes Volume Label : Work path : d:\programmes\winuae\HD\system then saving my config, booting and installing wb3.1 on this hard drive. I'm closing Winuae then reloading my config and the WB says : no disk in drive DH0 when i take a look to the HD config, I see : Device name : DH0 read/write : yes Bootable : yes Volume label : Path : work: D:\programmes\winuae\HD\system problem while recording the config ? Thanks for your Help Xain

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Creating A Directory To Act As A Hard Drive	amigauser	support.WinUAE	3	22 February 2008 12:22
Hard Drive Problem	blade002	support.Hardware	11	27 June 2006 10:23
Hard Drive Problem !!!	THX1138	support.Hardware	7	08 December 2002 18:56
Hard drive problem!	Pixel	support.Hardware	3	01 April 2002 14:36
Hard-Drive problem	Pixel	support.Hardware	1	10 March 2002 13:21

03 July 2008, 19:00	#2
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,518	Could you check the configuration file? Line that begins with "filesystem2".

04 July 2008, 12:06	#3
xain Posts: n/a	Hi Toni. Here is the line : filesystem2=rw,dh0::Work: D:\Programmes\Winuae\HD\System,0 (no space between Work: and D:\)

04 July 2008, 12:17	#4
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,518	Device name needs to be "dh0", not "dh0:" (I guess it should not confuse configuration but it does.. probably since the beginning.. will be fixed)

04 July 2008, 13:14	#5
xain Posts: n/a	Yes ! it's works now. Thanks a lot.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)