English Amiga Board

Go Back   English Amiga Board > Support > support.Hardware

Thread Tools
Old 14 February 2018, 14:35   #1
Registered User

Join Date: Jul 2017
Location: Burnley / England
Posts: 108
Question about the CoProcessor in the A2630

Hi all

Does anybody know if the A2630 requires a co-processor in order to work? Also, what versions can be used. I have seen pictures of a board with the MC68882RC25A.

Sanxion is offline  
Old 14 February 2018, 15:10   #2
Only Amiga !!

MigaTech's Avatar
Join Date: Apr 2017
Location: United Kingdom
Posts: 528
It is very unlikely that the A2630 requires the FPU to work as its only purpose was to lighten the load on the CPU, in specific software demands.

Most A1200 accelerators offered the FPU as an option with a jumper setting allowing the user to select between FPU clock etc. Even your top end accelerators such as Phase 5 Blizzards were sold with omitted FPU's.
MigaTech is offline  
Old 14 February 2018, 17:13   #3
Registered User
SpeedGeek's Avatar
Join Date: Dec 2010
Location: Wisconsin USA
Age: 56
Posts: 505
No, you don't need the FPU but since the stock A2630 was shipped with a MC68882RC25 there is no good reason not to keep it (unless you want to try your luck with overclocking).

Also, if you ever want to use any optimized FPU libraries or FPU dependent software then you will certainly need it.
SpeedGeek is offline  

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
What is Address $08000000? Coprocessor Slot Expansion? selco support.Hardware 2 18 March 2015 11:53
FS: Motorola MC68882FN25A PLCC FPU / Coprocessor Jon Hare MarketPlace 4 04 April 2012 23:38
Amiga 1200 - RTC + coprocessor tom256 Hardware mods 0 29 March 2012 09:57
Wanted Motorola 68882 PGA FPU Coprocessor @ 50MHz peyo64 MarketPlace 2 23 December 2009 01:00
A2630 amber2000 support.Hardware 1 13 April 2008 00:07

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +2. The time now is 20:16.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.05949 seconds with 15 queries