21 February 2014, 22:57 | #101 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
hi guys i got this usb adapter http://www.ebay.com/itm/USB-auf-RS23...611684&afsrc=1
if i use the power from the adapter do i still need floppy power as i cant get it to reconise my gotek |
21 February 2014, 23:16 | #102 | |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
Quote:
Hi, you need to install drivers for windows and also, red goes to 5v on 4 pin power adapter, black to ground on 4 pin power header. put a jumper across the left 2 pins, then white, then green. they are the only connections you need to program it. I bought the same programmer as you. I'll post a pic I soldered a header to the board to make life easier. once programmed remove the jumper on the left and move the s1 jumper to s0 like mine Last edited by kipper2k; 21 February 2014 at 23:29. |
|
21 February 2014, 23:37 | #103 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
|
21 February 2014, 23:40 | #104 | |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
Quote:
try a cold reboot and see if that fixes it and make sure the usb is plugged in b4 you open the program |
|
22 February 2014, 00:08 | #105 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
great i got this
i used this driver from here http://www.prolific.com.tw/US/ShowPr...id=225&pcid=41 using winxp virtual machine in windows 7 now to try on my miggy cheers kipper2k Last edited by johnim; 22 February 2014 at 00:44. |
22 February 2014, 01:09 | #106 | |
Ruler of the Universe
Join Date: Mar 2010
Location: Lanzarote/Spain
Posts: 6,185
|
Quote:
I've just bought this http://www.ebay.es/itm/400586409523?...84.m1497.l2649 for 1,52€ total. Also... I would like to use it as DF1, external. Can I? |
|
22 February 2014, 01:13 | #107 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
mine was 8 euro and took 7 days to come
it does work as df1 if you use in early startup and disable df0 if you boot to workbench you can change disk by pressing button and it loads next disk Last edited by johnim; 22 February 2014 at 01:21. |
22 February 2014, 01:20 | #108 | |
Ruler of the Universe
Join Date: Mar 2010
Location: Lanzarote/Spain
Posts: 6,185
|
And also...
Quote:
|
|
22 February 2014, 01:21 | #109 |
Registered User
Join Date: Jan 2014
Location: Somerset, UK
Posts: 547
|
|
22 February 2014, 01:26 | #110 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
Originally Posted by johnim
hi guys i got this usb adapter http://www.ebay.com/itm/USB-auf-RS23...611684&afsrc=1 heres a cheap uk usb stick http://www.ebay.co.uk/itm/Genuine-Sa...item4856bd473d |
22 February 2014, 01:37 | #111 |
Ruler of the Universe
Join Date: Mar 2010
Location: Lanzarote/Spain
Posts: 6,185
|
You keep posting things more expensive than mines. That's ok if you have hurry, but I don't mind to wait.
Edit: How's that? I didn't have to make an early startup with the HxC to use it as DF1. ¿? You sure? Last edited by Retrofan; 22 February 2014 at 01:45. |
22 February 2014, 01:43 | #112 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
i got the 8gb drive for 5.69 as 35% off but spent too much this week now over £200 on bits for pc and amiga ,
|
22 February 2014, 01:49 | #113 | |
Ruler of the Universe
Join Date: Mar 2010
Location: Lanzarote/Spain
Posts: 6,185
|
Quote:
That's why now I've preffer to wait... Edit: But yes, your stick is 8Gb, I didn't notice. A bargain. Last edited by Retrofan; 22 February 2014 at 01:56. |
|
22 February 2014, 03:31 | #114 | |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
Quote:
|
|
22 February 2014, 12:09 | #115 |
French in Australia
|
That's a nice new toy for mfilos blog...
|
22 February 2014, 14:44 | #116 |
Posts: n/a
|
Problem
I have one problem with USB flash hardware.
I have Green cable to J4 Tested two boards, two system XP,7, two drivers Cable from - http://www.ebay.com/itm/USB-auf-RS23...611684&afsrc=1 Last edited by venox; 22 February 2014 at 15:06. |
22 February 2014, 15:39 | #117 |
Moderator
Join Date: May 2012
Location: Stockholm / Sweden
Age: 49
Posts: 1,572
|
Join the club. I tried mine when it arrived. Failed to connect until I used ATX power instead.
Then a friend came over with his that he could not program. I could not either. Just got the same error over and over. Tried mine again and that failed as well. Over the 500 (or so) attempts I made with mine again, I managed to connect once. This was on Win8.1 x64 I then tried on Win7 x64. Same thing. Then I got the tip to try with XP x86 and it works fine every 2nd attempt. |
22 February 2014, 16:10 | #118 | |
Registered User
Join Date: Sep 2006
Location: Thunder Bay, Canada
Posts: 4,323
|
Quote:
http://eab.abime.net/showpost.php?p=...&postcount=105 |
|
22 February 2014, 16:56 | #119 | |
Posts: n/a
|
Quote:
I have true Intel PC with WindowsXP SP3 32bit. |
|
22 February 2014, 17:16 | #120 |
Amibay Mod/Staff
Join Date: Jun 2010
Location: birmingham uk
Age: 48
Posts: 1,019
|
Try winxp and use the drivers I used and it worked first time as kipper2k linked
If in windows 7 use xp mode |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Love Emulators? - Dgen & Hatari emulators | Paul | News | 18 | 14 January 2023 20:56 |
Cd32 from analogic computers not working properly | fondpondforever | Amiga scene | 11 | 22 August 2013 14:24 |
A1200 floppy not working | mtb | support.Hardware | 5 | 22 November 2010 09:05 |
floppy df0 working / not working | Dave_wb | support.Hardware | 3 | 07 January 2009 09:11 |
Guinness Book entry with 274 working Computers/Consoles | Retro-Nerd | Retrogaming General Discussion | 4 | 25 August 2007 19:56 |
|
|