English Amiga Board


Go Back   English Amiga Board > Main > Retrogaming General Discussion

 
 
Thread Tools
Old 03 March 2021, 16:51   #1
LeCaravage
Registered User

LeCaravage's Avatar
 
Join Date: May 2017
Location: AmigaLand
Posts: 284
CRT decay when old ?

Hi,

I noticed a pb while coding on my Amiga wired to a 1083S. I tried to fix a copper pb during several days and when suddenly had a doubt. May be it's my 1083's fault ? I mean the display is wrong. So I made a test on WinUAE and I was right, my 1083 is probably too old and the image begings to be bad.

Anyone where it come from ? Is it fixable ?

Here is screenshots, the 1083 is blurring but you can notice the red line seems higher and the blue one seems too low (almost 1 vertical line pixel error).



LeCaravage is offline  
Old 04 March 2021, 22:33   #2
Rotareneg
Registered User
Rotareneg's Avatar
 
Join Date: Sep 2017
Location: Kansas, USA
Posts: 216
Colors not being aligned on an CRT is due to poor convergence, which means the electron beams for red, green, and blue are not aimed exactly where they're supposed to. This is generally adjusted by rotating the magnets that surround the neck of the CRT, but it's a notoriously tricky process that can take a while to do even if you know what you're doing, and that's assuming the 1083 even has adjustable convergence (not all CRTs do.)

As far as CRTs "decaying", yes, they do. The values of various electronic components can change with age, the electron guns wear out, and the phosphors degrade from use (that's what causes burn-in.)
Rotareneg is offline  
Old 05 March 2021, 03:02   #3
Bruce Abbott
Registered User

Bruce Abbott's Avatar
 
Join Date: Mar 2018
Location: Hastings, New Zealand
Posts: 608
A bit of convergence error at the edges of the screen is normal. Each electron gun aims at the screen from slightly different position, and the screen surface is not perfectly hemispherical, so the geometry is distorted in different directions for each color. This is corrected with a combination of adjustable permanent magnets around the tube, and dynamic correction by modulating the deflection waveforms. It is very difficult to get all 3 beams perfectly aligned, particularly in the corners of the screen.

As electronic components on the PCB and parts of the tube age the convergence often drifts further out of alignment. However if your 'almost 1 line' is only in the corners that may be how it has always been.

To check convergence over the whole screen and gauge whether adjusting the alignment might be necessary, display an image with a grid pattern of white lines on a black background. Where convergence is not perfect you will see the white separating into colored lines, like this:-
Attached Thumbnails
Click image for larger version

Name:	unnamed.jpg
Views:	41
Size:	60.0 KB
ID:	71159  
Bruce Abbott is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Old CRT TV XsamX1987 support.Hardware 2 08 March 2017 17:48
2 Classic Demo's from Aussie group DECAY dJOS Games images which need to be WHDified 18 25 June 2016 13:20
There can be no true beauty without decay? lordofchaos Nostalgia & memories 17 14 July 2011 18:41
REVENGE II - DORIS DAY (1993,Decay) mv500 Nostalgia & memories 0 13 August 2006 12:20
Paradise Decay Mods / MP3's Paradise Decay request.Modules 16 27 July 2006 17:01

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 01:12.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Page generated in 0.15324 seconds with 16 queries