English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 10 May 2020, 13:20   #1
rjd324
Registered User

 
Join Date: May 2020
Location: NE / UK
Posts: 46
A 600 mouse extension

Fitting 600 into tower. Are there any extensions for the mouse / keyboard so that I can use the back panel to insert devices. Only thing I can think of is to buy http://amigakit.amiga.store/product_...ducts_id=12674 and wire them up.

Thanks.
rjd324 is offline  
Old 10 May 2020, 13:25   #2
rjd324
Registered User

 
Join Date: May 2020
Location: NE / UK
Posts: 46
https://amigakit.amiga.store/product...oducts_id=1245

Then a 9 pin male to male?
rjd324 is offline  
Old 10 May 2020, 13:27   #3
rjd324
Registered User

 
Join Date: May 2020
Location: NE / UK
Posts: 46
Close thread. I have seen the relevant previous thread. Thank you.

https://eab.abime.net/showthread.php?t=88032
rjd324 is offline  
Old 10 May 2020, 13:29   #4
Daedalus
Registered User

Daedalus's Avatar
 
Join Date: Jun 2009
Location: Dublin, then Glasgow
Posts: 4,802
Buy some crimp on connectors instead and some 10-way 1.27mm ribbon cable. Saves messing with fragile solder connections and is much quicker. Example plug, and there are others.

Keyboard is another story, and you're much better off getting a small adaptor that will take a standard PC or Amiga external keyboard. If you're into your soldering, you can connect an Amiga external keyboard from a 2000, 3000 or 4000 directly to the A600 using an upturned PLCC-44 socket, DIN socket and some wire.

Last edited by Daedalus; 15 May 2020 at 23:25. Reason: Fixed URL
Daedalus is offline  
Old 15 May 2020, 09:42   #5
rjd324
Registered User

 
Join Date: May 2020
Location: NE / UK
Posts: 46
Sorry. I meant to say joystick instead of keyboard

Hey can you sort that link out because for me nothing shows?

Thanks.
rjd324 is offline  
Old 15 May 2020, 23:31   #6
Daedalus
Registered User

Daedalus's Avatar
 
Join Date: Jun 2009
Location: Dublin, then Glasgow
Posts: 4,802
Oops, sorry! Copy & paste fail on my part I think. It's fixed now anyway, and here's a female version to match and suitable cable, but again, there are others to choose from.
Daedalus is offline  
Old 19 May 2020, 15:28   #7
rjd324
Registered User

 
Join Date: May 2020
Location: NE / UK
Posts: 46
Hey. Is there a reason why you are using 10 cable? There is 9 too.thanks.
rjd324 is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Mouse and joystick extension cable kirk_m support.Hardware 11 27 July 2017 20:26
Can I use a Cocolino Mouse adapter on my Amiga 600? retrogamer support.Hardware 9 29 October 2013 21:36
Amiga 600 mouse problem with Y majsta support.Hardware 23 09 October 2013 15:16
Mouse/Joystick Extension Cord, 1.8 m (9-pin m/f, not suitable for Amiga 600) Old Fool support.Hardware 0 25 November 2011 14:57
Amiga 600 Mouse Port Problems sirskinbad support.Hardware 5 16 April 2006 02:00

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 05:31.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.06710 seconds with 15 queries