When workbench starts with fs-uae i cannot found (asks two times) ENV why?

JPQ · 01 March 2014, 19:45

When workbench starts with fs-uae i cannot found (asks two times) ENV why? same files works fine with amiga. dont work even i make env use shich is this virtual harddrive. but after this when click cancel two times wb loads fine. any reasons for this. How i can fix it.

Goingdown · 02 March 2014, 07:29

Your harddisk name is different under FS-UAE? And then in your workbench startup sequence, there is reference to the wrong harddisk?

EDIT. You may use option hard_drive_0_label to set up hard disk name to be what it should be
Example: hard_drive_0_label = My Volume Label

JPQ · 03 March 2014, 03:19

Its same name. copy is almost exactly same i current only removed cv64/3d drivers and idefix 97.
and added few programs which dont need startup-sequence/user-startup modifaction.

zipper · 03 March 2014, 12:34

Would this work: Put <set echo on> as the first line of your startup-sequence so you can see what's calling for ENV:

thomas · 03 March 2014, 14:07

First of all you should make sure that these lines are not missing from your startup-sequence:

Code:

; $VER: Startup-Sequence_HardDrive 40.2 (25.2.93)
; Startup-Sequence for hard drive systems

C:SetPatch QUIET

C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

zipper · 03 March 2014, 18:02

I think he is an Amiga user since 22 years - too trivial

Retrofan · 03 March 2014, 18:17

Sometimes the Makedir and assignment of Ram:Env is later on the s-s. I also found my system asking for Env after BB4 and I had to put that assignment before on the s-s.

JPQ · 07 March 2014, 02:25

Quote:

Originally Posted by zipper

I think he is an Amiga user since 22 years - too trivial

very likely. and i think i test this echo on thing. and tell what happens.

JPQ · 07 March 2014, 02:31

i mean look what happens. and this before on what this mean this assignment. btw this startup-sequence works real amiga fine.

JPQ · 07 March 2014, 02:39

set echo on shows this:

ps. btw i copy my bit messy staryup-sequence and user-startup for there if someone wants.

JPQ · 07 March 2014, 02:44

ENV asking goes away when i remove startup sequence scsiupdate lines and other related lines.

JPQ · 07 March 2014, 02:45

makes using now much nicer. I hope i can soon develop something for amiga. i have few BIG ideas. i dont know if made them ever all is related if i can found nice way do them.
have also Smaller ideas.

Retrofan · 07 March 2014, 04:10

Quote:

Originally Posted by JPQ

ENV asking goes away when i remove startup sequence scsiupdate lines and other related lines.

Perhaps you didn't read my answer:

Quote:

Originally Posted by Retrofan

Sometimes the Makedir and assignment of Ram:Env is later on the s-s. I also found my system asking for Env after BB4 and I had to put that assignment before on the s-s.

Try moving them to stay before on the s-s.

Quote:

Originally Posted by JPQ

ps. btw i copy my bit messy staryup-sequence and user-startup for there if someone wants.

And you haven't posted your s-s. The User-Startup isn't necessary.

JPQ · 07 March 2014, 04:50

my startup-sequence gomes soon here. is here:
; $VER: Startup-Sequence_HardDrive 45.2 (19.1.2001)
; Startup-Sequence for AmigaOS 3.9
Set Echo on
If EXISTS C:SquirrelSCSI
C:SquirrelSCSI
EndIf

;Set SCSIUpdate 1
;If EXISTS C:IDEFix
; C:IDEFix
; Set SCSIUpdate 0
;EndIf
If EXISTS SYS:Expansion/XSurfIDE
Set SCSIUpdate 0
EndIf
If EXISTS SYS:Prefs/Env-Archive/NOSCSIUPDATE
Set SCSIUpdate 0
EndIf
If $SCSIUpdate EQ 1
SetPatch QUIET
Else
SetPatch SKIPROMUPDATES "scsi.device" QUIET
EndIf
Unset SCSIUpdate

C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
Workbench:Boottidelay
C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

BindDrivers
C:Mount >NIL: DEVS

OSDrivers/~(#?.info)

C:LoadMonDrvs

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

C:AddDataTypes REFRESH QUIET
Run > NIL: "Workbench:VisualPrefs"
C:IPrefs
C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

SYS:System/REXXMast >NIL:

IF EXISTS S:User-Startup
Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE

C:LoadWB
EndCLI >NIL:

ps. and if i remove these scsi speffic commands which make this env problem i get another problem says workbench.library is 40.5 not 45 as it should...

JPQ · 07 March 2014, 04:50

oops shows some text wrong way i bet you know what place i mean.

JPQ · 07 March 2014, 05:22

and this makes amidock for example non working state!. is funny amiga emulator is much harder use than real amiga.

amigafreak68k · 07 March 2014, 09:13

Insert "assign ENV: ENVARC:" before these SCSI lines. This should prevent the ENV-dialog.

some steps later in the startup sequence ENV: will be assigned to RAM:ENV...

So this shouldn't be a problem

And the problem with workbench library is, that no ROM Update is running. The variable "SCSIUpdate" isn't set to "1".

Try this:

Code:

; $VER: Startup-Sequence_HardDrive 45.2 (19.1.2001)
; Startup-Sequence for AmigaOS 3.9
Set Echo on

assign >NIL: ENV: ENVARC:

If EXISTS C:SquirrelSCSI
C:SquirrelSCSI
EndIf

Set SCSIUpdate 1
If EXISTS C:IDEFix
   C:IDEFix
   Set SCSIUpdate 0
EndIf

If EXISTS SYS:Expansion/XSurfIDE
   Set SCSIUpdate 0
EndIf

If EXISTS SYS:Prefs/Env-Archive/NOSCSIUPDATE
   Set SCSIUpdate 0
EndIf

If $SCSIUpdate EQ 1
   SetPatch QUIET
Else
   SetPatch SKIPROMUPDATES "scsi.device" QUIET
EndIf

Unset SCSIUpdate

C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
Workbench:Boottidelay
C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

BindDrivers
C:Mount >NIL: DEVSOSDrivers/~(#?.info)

C:LoadMonDrvs

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

C:AddDataTypes REFRESH QUIET
Run > NIL: "Workbench:VisualPrefs"
C:IPrefs
C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

SYS:System/REXXMast >NIL:

IF EXISTS S:User-Startup
   Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE

C:LoadWB
EndCLI >NIL:

01 March 2014, 19:45	#1
JPQ Registered User Join Date: Mar 2014 Location: Akaa Posts: 57	When workbench starts with fs-uae i cannot found (asks two times) ENV why? When workbench starts with fs-uae i cannot found (asks two times) ENV why? same files works fine with amiga. dont work even i make env use shich is this virtual harddrive. but after this when click cancel two times wb loads fine. any reasons for this. How i can fix it.

07 March 2014, 02:39	#10
JPQ Registered User Join Date: Mar 2014 Location: Akaa Posts: 57	set echo on shows this: ps. btw i copy my bit messy staryup-sequence and user-startup for there if someone wants. Attached Thumbnails

07 March 2014, 04:50	#14
JPQ Registered User Join Date: Mar 2014 Location: Akaa Posts: 57	my startup-sequence gomes soon here. is here: ; $VER: Startup-Sequence_HardDrive 45.2 (19.1.2001) ; Startup-Sequence for AmigaOS 3.9 Set Echo on If EXISTS C:SquirrelSCSI C:SquirrelSCSI EndIf ;Set SCSIUpdate 1 ;If EXISTS C:IDEFix ; C:IDEFix ; Set SCSIUpdate 0 ;EndIf If EXISTS SYS:Expansion/XSurfIDE Set SCSIUpdate 0 EndIf If EXISTS SYS:Prefs/Env-Archive/NOSCSIUPDATE Set SCSIUpdate 0 EndIf If $SCSIUpdate EQ 1 SetPatch QUIET Else SetPatch SKIPROMUPDATES "scsi.device" QUIET EndIf Unset SCSIUpdate C:Version >NIL: C:AddBuffers >NIL: DF0: 15 FailAt 21 C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys Workbench:Boottidelay C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ Resident >NIL: C:Assign PURE Resident >NIL: C:Execute PURE Assign >NIL: ENV: RAM:ENV Assign >NIL: T: RAM:T Assign >NIL: CLIPS: RAM:Clipboards Assign >NIL: REXX: S: Assign >NIL: PRINTERS: DEVS:Printers Assign >NIL: KEYMAPS: DEVS:Keymaps Assign >NIL: LOCALE: SYS:Locale Assign >NIL: LIBS: SYS:Classes ADD Assign >NIL: HELP: LOCALE:Help DEFER BindDrivers C:Mount >NIL: DEVSOSDrivers/~(#?.info) C:LoadMonDrvs SetEnv Language "english" SetEnv Workbench $Workbench SetEnv Kickstart $Kickstart UnSet Workbench UnSet Kickstart C:AddDataTypes REFRESH QUIET Run > NIL: "Workbench:VisualPrefs" C:IPrefs C:ConClip Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities SYS:System/REXXMast >NIL: IF EXISTS S:User-Startup Execute S:User-Startup EndIF Resident Execute REMOVE Resident Assign REMOVE C:LoadWB EndCLI >NIL: ps. and if i remove these scsi speffic commands which make this env problem i get another problem says workbench.library is 40.5 not 45 as it should...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Insert ENV Message - OS3.9	LuMan	support.Apps	6	28 April 2013 00:24
E-UAE Workbench Speed	Washac	support.OtherUAE	5	21 February 2012 21:25
UAE KXLight and my Workbench 3.9 SCSI HDD from my Amiga	Drake008@	support.WinUAE	4	07 September 2008 03:51
Drakkhen asks for disk 2!?	NLS	project.WHDLoad	2	18 January 2008 17:17
cannot save files to env:	amifreak	support.Hardware	2	20 December 2004 02:01

02 March 2014, 07:29	#2
Goingdown Registered User Join Date: Dec 2012 Location: Finland Posts: 162	Your harddisk name is different under FS-UAE? And then in your workbench startup sequence, there is reference to the wrong harddisk? EDIT. You may use option hard_drive_0_label to set up hard disk name to be what it should be Example: hard_drive_0_label = My Volume Label

03 March 2014, 03:19	#3
JPQ Registered User Join Date: Mar 2014 Location: Akaa Posts: 57	Its same name. copy is almost exactly same i current only removed cv64/3d drivers and idefix 97. and added few programs which dont need startup-sequence/user-startup modifaction.

03 March 2014, 12:34	#4
zipper Registered User Join Date: Mar 2004 Location: finland Posts: 1,838	Would this work: Put <set echo on> as the first line of your startup-sequence so you can see what's calling for ENV:

03 March 2014, 18:02	#6
zipper Registered User Join Date: Mar 2004 Location: finland Posts: 1,838	I think he is an Amiga user since 22 years - too trivial

03 March 2014, 18:17	#7
Retrofan Ruler of the Universe Join Date: Mar 2010 Location: Lanzarote/Spain Posts: 6,189	Sometimes the Makedir and assignment of Ram:Env is later on the s-s. I also found my system asking for Env after BB4 and I had to put that assignment before on the s-s.

07 March 2014, 02:31	#9
JPQ Registered User Join Date: Mar 2014 Location: Akaa Posts: 57	i mean look what happens. and this before on what this mean this assignment. btw this startup-sequence works real amiga fine.

07 March 2014, 02:44	#11
JPQ Registered User Join Date: Mar 2014 Location: Akaa Posts: 57	ENV asking goes away when i remove startup sequence scsiupdate lines and other related lines.

07 March 2014, 02:45	#12
JPQ Registered User Join Date: Mar 2014 Location: Akaa Posts: 57	makes using now much nicer. I hope i can soon develop something for amiga. i have few BIG ideas. i dont know if made them ever all is related if i can found nice way do them. have also Smaller ideas.

07 March 2014, 05:22	#16
JPQ Registered User Join Date: Mar 2014 Location: Akaa Posts: 57	and this makes amidock for example non working state!. is funny amiga emulator is much harder use than real amiga.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)