04 November 2003, 21:37 | #1 |
Posts: n/a
|
Program not found
Hi.......again
Seems like im posting a prob here every 5 minutes now Ok,following on from this thread here ,i bought the null modem cable as advised,and also purchased the amiga explorer software. My cable turned up today,so i set about putting the 25 pin end into my amiga serial pot,and the 9 pin into the pc. Then i click setup,and it tells me what settings to have the amiga on,then it tells me to type a command into the amiga shell type SER: to RAM:setup click ok on the pc,and wait for the next prompt window,from here im told to type into the amiga RX RAM:setup i do so,click ok on the pc,and the amiga returns with DC10 error program not found (or something very similar) After a few attempts,i convince myself its down to the amiga port settings,so i go to workbench 3.0\prefs\ and all i have is presets,in there i have Epson Q and epson X no Serial settings to be seen,even when show all files is on there is nothing. Im really stuck here,as i cant even get them to send files to each other to even set software onto the amiga. Can anyone help,all i know on the amiga is that its a 1200,2mb ram and an aga graphics chip. |
04 November 2003, 23:48 | #2 |
Posts: n/a
|
heh,after all the time reading through various posts/guides the serial options were found on the extras disk
But you never know,this post may help someone like me in the future. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
External windows program communicating with program running inside WinUAE | xxxxx | support.WinUAE | 10 | 19 February 2013 09:27 |
Paint program or program....... | amigagenie | request.Apps | 2 | 29 January 2013 19:56 |
Which program is this? | absence | request.Apps | 8 | 26 June 2012 11:31 |
For a beginner what Program and Program language would you recommend? | amigang | New to Emulation or Amiga scene | 5 | 27 March 2012 13:06 |
Calling another program from a compiled Amos program...? | andyr | support.Apps | 3 | 24 October 2004 23:47 |
|
|