New Zealand Story on plain 68000

Gaula92 · 18 May 2013, 14:12

Hi there,

Can you guys please test New Zealand Story slave v2.0 on a plain-68000 Amiga?
I'm getting a very strange behaviour on the Minimig and the Amiga 600:
All I get is a black screen. If I push the joystick button, it will work on both machines, but only if I wait for a while. If I push the button too early, I get a corrupt intro and the game hangs there.

I don't know if I should report this via mantis as it seems a strange behaviour and not the typical Whdload error.

Hungry Horace · 28 May 2013, 01:27

Please use Mantis for these kind of bugs, as I would have never seen this if I had not posted in the board today!!

I will look into it further though...

Gaula92 · 28 May 2013, 11:59

@Hungry Horace: I used Mantis for this issue already, but strangely enough, I can't find the report anymore

Should I do another Mantis report?

Hungry Horace · 28 May 2013, 14:52

I've had a look myself and can't see it either... Best to put it on there as it acts as a reminder for me!

Gaula92 · 28 May 2013, 17:44

ok, done

Gaula92 · 24 June 2013, 12:20

Hi, Hungry Horace!

I've just tried both slaves you have released on http://mantis.whdload.de/view.php?id=2765

However, they both act the same way the original slave does: the game stays in a black screen, and tittle screen doesn't come up until I do one of the following things:

-Soft-reset the Minimig or Amiga 600 (YES, it's true! If I soft-reset the Amiga, the game's tittle screen comes up and I can play without any problems).
-Press the joystick button after waiting for a while (if I press it too soon, the game is corrupt and hangs on the intro sequence).

I can't reproduce it on any version of UAE, I only have FS-UAE at hand since I don't have a Windows system myself, but none of the 68000-based configurations show this behaviour.

Hungry Horace · 28 June 2013, 15:03

Beta version for testing in the Zone - should work with both versions of the game.

My thanks to Gaula92 for providing feedback where i was unable to reproduce the bug.

Gaula92 · 29 June 2013, 12:28

This beta works great on both original Minimg (plain 68000 on board) and Amiga 600!
No need for CUSTOM4 parameter anymore.
I completed 5 stages with no problems at all! I wouln't use cheats to complete it because I've never finished this game and it would spoil it for me, but it seems everything is alright!

Thanks!

pintcat · 06 July 2013, 09:47

Latest slave doesn't work for me (A1200 with 060 CPU, 128MB FastRAM). It aborts with this message:

Code:

Exception "Access Fault" ($4008)
PC = $2AB6
Byte Read from $7F000644

Slave v2.0 worked fine. I attached a core dump which might help...

Irek´72 · 06 July 2013, 18:36

Quote:

Originally Posted by pintcat

Latest slave doesn't work for me (A1200 with 060 CPU, 128MB FastRAM). It aborts with this message:

Code:

Exception "Access Fault" ($4008)
PC = $2AB6
Byte Read from $7F000644

Slave v2.0 worked fine. I attached a core dump which might help...

First I also had similar problem with the new slave on my setup (A1200/40/64) and I've tried using some tool types. And it seems that the game needs NOMMU option to properly work on fast Amigas.

pintcat · 07 July 2013, 01:38

Too bad, NOMMU is one of these options I always try to avoid since my system (especially my CPU libs) makes heavy use of MMU functions. WHDLoad usually warns me about this and advises me not to use "NOMMU". I tried it anyway and ended up with a black screen. I'm afraid I have to install a different 68060.library to see if the new slave works with this option. Until then I'll stick with good old v2.0 (which actually works flawless for me). Thanks for the hint anyway!

Hungry Horace · 07 July 2013, 10:21

I wasn't proud of the 68000 fix, so maybe I will go back to putting it on a tool type...CUSTOM4=1

lesta_smsc · 07 July 2013, 10:52

I had this game on my Amiga A600HD and it ran without any problems? It was a cracked version, however, so I'm not sure if they had done any patches.

Gaula92 · 07 July 2013, 12:35

lesta_smsc: floppy versions run on my A600, too. It's the whdload version wich doesn't work on either the Minimig or the A600, until Hungry_Horace fixed it.
Sorry to hear the fix affected others

Irek´72 · 08 July 2013, 20:57

Quote:

Originally Posted by Hungry Horace

I wasn't proud of the 68000 fix, so maybe I will go back to putting it on a tool type...CUSTOM4=1

Well, I think that this is a good idea because the version 2.0 works well on my setup without any problems or additional setups too.

dlfrsilver · 08 July 2013, 21:47

This game protection use a hidden encrypted bootblock (the first thing the copylock is doing is to decrypt the normal bootblock then load the game).

18 May 2013, 14:12	#1
Gaula92 Registered User Join Date: Aug 2008 Location: Spain Posts: 527	New Zealand Story on plain 68000 Hi there, Can you guys please test New Zealand Story slave v2.0 on a plain-68000 Amiga? I'm getting a very strange behaviour on the Minimig and the Amiga 600: All I get is a black screen. If I push the joystick button, it will work on both machines, but only if I wait for a while. If I push the button too early, I get a corrupt intro and the game hangs there. I don't know if I should report this via mantis as it seems a strange behaviour and not the typical Whdload error.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Barbarian on plain 68000	Gaula92	project.WHDLoad	5	10 February 2013 12:36
New Zealand Story on A1200	chaoticjelly	support.Games	21	31 December 2008 12:28
New Zealand Story for the DS!	killergorilla	Amiga scene	28	25 December 2008 02:23
New Zealand Story / WinUAE	Dante	support.Games	3	14 April 2008 10:12
New zealand story.	Chase	Retrogaming General Discussion	19	18 March 2003 04:56

28 May 2013, 01:27	#2
Hungry Horace Wipe-Out Enthusiast Join Date: Nov 2005 Location: . Age: 43 Posts: 2,538	Please use Mantis for these kind of bugs, as I would have never seen this if I had not posted in the board today!! I will look into it further though...

28 May 2013, 11:59	#3
Gaula92 Registered User Join Date: Aug 2008 Location: Spain Posts: 527	@Hungry Horace: I used Mantis for this issue already, but strangely enough, I can't find the report anymore Should I do another Mantis report?

28 May 2013, 14:52	#4
Hungry Horace Wipe-Out Enthusiast Join Date: Nov 2005 Location: . Age: 43 Posts: 2,538	I've had a look myself and can't see it either... Best to put it on there as it acts as a reminder for me!

28 May 2013, 17:44	#5
Gaula92 Registered User Join Date: Aug 2008 Location: Spain Posts: 527	ok, done

24 June 2013, 12:20	#6
Gaula92 Registered User Join Date: Aug 2008 Location: Spain Posts: 527	Hi, Hungry Horace! I've just tried both slaves you have released on http://mantis.whdload.de/view.php?id=2765 However, they both act the same way the original slave does: the game stays in a black screen, and tittle screen doesn't come up until I do one of the following things: -Soft-reset the Minimig or Amiga 600 (YES, it's true! If I soft-reset the Amiga, the game's tittle screen comes up and I can play without any problems). -Press the joystick button after waiting for a while (if I press it too soon, the game is corrupt and hangs on the intro sequence). I can't reproduce it on any version of UAE, I only have FS-UAE at hand since I don't have a Windows system myself, but none of the 68000-based configurations show this behaviour.

28 June 2013, 15:03	#7
Hungry Horace Wipe-Out Enthusiast Join Date: Nov 2005 Location: . Age: 43 Posts: 2,538	Beta version for testing in the Zone - should work with both versions of the game. My thanks to Gaula92 for providing feedback where i was unable to reproduce the bug.

29 June 2013, 12:28	#8
Gaula92 Registered User Join Date: Aug 2008 Location: Spain Posts: 527	This beta works great on both original Minimg (plain 68000 on board) and Amiga 600! No need for CUSTOM4 parameter anymore. I completed 5 stages with no problems at all! I wouln't use cheats to complete it because I've never finished this game and it would spoil it for me, but it seems everything is alright! Thanks!

07 July 2013, 01:38	#11
pintcat Registered User Join Date: Mar 2008 Location: Berlin/Germany Posts: 226	Too bad, NOMMU is one of these options I always try to avoid since my system (especially my CPU libs) makes heavy use of MMU functions. WHDLoad usually warns me about this and advises me not to use "NOMMU". I tried it anyway and ended up with a black screen. I'm afraid I have to install a different 68060.library to see if the new slave works with this option. Until then I'll stick with good old v2.0 (which actually works flawless for me). Thanks for the hint anyway!

07 July 2013, 10:21	#12
Hungry Horace Wipe-Out Enthusiast Join Date: Nov 2005 Location: . Age: 43 Posts: 2,538	I wasn't proud of the 68000 fix, so maybe I will go back to putting it on a tool type...CUSTOM4=1

07 July 2013, 10:52	#13
lesta_smsc Registered User Join Date: Feb 2012 Location: United Kingdom Posts: 3,173	I had this game on my Amiga A600HD and it ran without any problems? It was a cracked version, however, so I'm not sure if they had done any patches.

07 July 2013, 12:35	#14
Gaula92 Registered User Join Date: Aug 2008 Location: Spain Posts: 527	lesta_smsc: floppy versions run on my A600, too. It's the whdload version wich doesn't work on either the Minimig or the A600, until Hungry_Horace fixed it. Sorry to hear the fix affected others

08 July 2013, 21:47	#16
dlfrsilver CaptainM68K-SPS France Join Date: Dec 2004 Location: Melun nearby Paris/France Age: 46 Posts: 10,412	This game protection use a hidden encrypted bootblock (the first thing the copylock is doing is to decrypt the normal bootblock then load the game).

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)