25 April 2018, 23:36 | #1 |
This cat is no more
Join Date: Dec 2004
Location: FRANCE
Age: 52
Posts: 8,163
|
can't seem to prep a CF card anymore (WinUAE)
I've done this before but now I can't figure out what I did to make that work!
1. run winuae as admin 2. add a CF card (using uaehf.device) 3. boot => I see the data, it works fine, formatting is OK, good. Now I'd like to switch to PFS3, so I have to use HDToolbox for that. First, which version of PFS3 should I choose ? there are several files, which one is the best (filesize, version) Second, which maxtransfer/etc. should I use? 1FE00, FFFFFF ?? Last (but really annoying), I can't see my CF card on HDtoolbox. I've selected uaehf.device, it doesn't work. I tried to add the CF card using IDE, but it's not even visible through winuae. I've tried a lot of things (and I was able to prep hard drives, CF cards in the past but now I've completely lost it!) help. (sorry if this was asked before, I've read a lot of threads here, but still no go) |
25 April 2018, 23:51 | #2 |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
This is the newest pfs3aio
http://eab.abime.net/showpost.php?p=...&postcount=235 1FE00 is the one you want In HDToolbox tooltypes (icon information) set change from scsi.device to uaehf.device |
26 April 2018, 00:37 | #3 | ||
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
Quote:
Quote:
If you are preparing the CF for a AMiGA Real use HD Controller Commodore A600/A1200/A4000 IDE if you can help you here are some of my videos (preparation SD for CDTV Real + Mount CF/SD/Penrive PC Format): CDTV- SD/CF OS1.3 [ Show youtube player ] CDTV- SD/CF OS2.1 [ Show youtube player ] Mount/Dismount Two SD FAT16/32 [ Show youtube player ] Last edited by AMIGASYSTEM; 26 April 2018 at 01:00. |
||
26 April 2018, 09:03 | #4 | |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Quote:
Most common reason for IDE not working: not using correct Amiga model (chipset extra setting) and/or mismatched KS ROM. |
|
26 April 2018, 09:42 | #5 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
Yes Toni i had forgotten to add "Chipset Extra Setting"
|
26 April 2018, 09:43 | #6 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,861
|
Why would you add anything, when you can start from a real computer in quickstart and work from that base. :-)
|
26 April 2018, 10:37 | #7 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
No on uses Quickstart to reset already existing "high end" config.
Starting point is usually already existing "A1200" config which most likely uses A4000 ROM and does not have any mainboard specific features enabled. |
26 April 2018, 10:50 | #8 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,861
|
Seems my use of WinUAE is much more adhoc than what others do with it. ;-)
Still I wonder why you'd make a base config that doesn't exist in the real world when you're making your high end system. |
26 April 2018, 11:11 | #9 |
Registered User
Join Date: Aug 2014
Location: Brindisi (Italy)
Age: 70
Posts: 8,248
|
It's more a question of verification, old config are not very compatible and may contain inconsistencies on a new version of WinUAE. Without a conformity CF it will start quietly from WinUAE but it will not start on the Amiga Real
|
26 April 2018, 12:28 | #10 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,505
|
Historic reasons, as usual (before IDE emulation existed or A1200/A4000 ROMs were marked properly etc..). Config files are rarely made from scratch, only adjusted if/when needed.
There are also other "bad configurations", for example Z3 RAM is very rare in real world (it didn't exist in 1990s, it is slow) but most configs use it because it was the first emulated large RAM option and it is still the most flexible RAM option. |
26 April 2018, 12:55 | #11 |
This cat is no more
Join Date: Dec 2004
Location: FRANCE
Age: 52
Posts: 8,163
|
thanks Toni, the extra chipset is probably not set. I'll check that. WinUAE is just too powerful, we're forgetting how complex the real amiga world can be.
It's just so frustrating when I was able to do that several times... It's ugly to get old |
26 April 2018, 13:37 | #12 |
Registered User
Join Date: Aug 2016
Location: Cresco, PA, USA
Age: 53
Posts: 1,126
|
You may find this tutorial helpful - it's usually my fallback when something doesn't seem to go right. I even altered it for me personally to complete without winUAE. I copied the files I needed to adf and insert into gotek using real floppies for WB and was able to setup a real Amiga using these instructions altered to my scenario.
https://16bitdust.wordpress.com/2015...nuae-and-pfs3/ |
27 April 2018, 00:09 | #13 |
This cat is no more
Join Date: Dec 2004
Location: FRANCE
Age: 52
Posts: 8,163
|
Okay so I've enabled A1200 chipset, selected A600/A1200/A4000 IDE but what really clicked was ticking "lock" as Amigasystem advised!
Now HDtoolbox can partition the disk, thanks all! PS: pfsaio link is broken, latest version is here: http://aminet.net/disk/misc/pfs3aio.lha, Toni post: http://eab.abime.net/showthread.php?t=90778 Last edited by jotd; 27 April 2018 at 00:14. |
27 April 2018, 19:52 | #15 |
This cat is no more
Join Date: Dec 2004
Location: FRANCE
Age: 52
Posts: 8,163
|
Yes, I got that one, installed it and it works! thanks. I'm not forgetting that anymore. I was using different winuae configs (one for elevated/installations and one without elevation) now I'm using only one, with all proper settings. Basically my issues were:
- A1200 chipset not enabled - uaehf.device / wrong IDE mode set - to make it boot on a real amiga I had to reduce slightly the partition size (worked on WinUAE) as I read somewhere here that there's a bug (LBA stuff) when trying to use 4Gb. Anyway who needs 4Gb in 1994 right? Last edited by jotd; 29 April 2018 at 11:46. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WinUAE prep 8Gb Compact Flash | xArtx | support.WinUAE | 3 | 27 December 2015 06:47 |
WinUAE 2.7.0 Display not centered anymore | Skylight | support.WinUAE | 38 | 20 July 2014 17:18 |
Winuae won't start anymore/crashes | jamotide | support.WinUAE | 6 | 30 June 2012 23:18 |
WinUAE 2.4.1 does not boot with attached HD anymore | Jasmin68k | support.WinUAE | 9 | 18 June 2012 09:31 |
REQ: GVP FAAAST PREP 2.0 & Expert Prep 2.5 | jhallows | request.Other | 6 | 11 June 2007 16:51 |
|
|