English Amiga Board


Go Back   English Amiga Board > Support > support.WinUAE

 
 
Thread Tools
Old 21 July 2010, 03:17   #1
MoreGrog
Registered User
 
Join Date: Jul 2010
Location: Norway
Posts: 10
"block zero write failed!" Error message

Hi, my first post here.

I used to swap amiga demos and games back in 1989-1994. And I suddenly got an urge to update my hw.

I have an Amiga 1200 v3.0 ROM and a CF Sandisk 2gb ultra that i want to use as a hard drive for the amiga. I am using WinXP + Winuae to prepare the CF as hard drive.

( I have followed the steps explained in another thread here. )

I'm setting 3 partitions in the menu and i select 0x1fe00 as maxtrans () for all partitions.
Finally when i select "Save Changes to Drive" I get this windows popup error message:

quote
winuae message
hd_usb mass storage device -|
block zero write failed!
unqoute

( And this also has a side effect, winXp wants to format my cf card after this happens (if i open the drive from windows) )

I tried using UAE and uaehf.device
and IDE0 and scsi.device

(What is the best device driver to use anyway?)

I have done this a couple of times now, always the same message.

My CF All in one card reader is this one:
http://cgi.ebay.com/ws/eBayISAPI.dll...=STRK:MEWNX:IT

Any help would be helpful.
MoreGrog is offline  
Old 21 July 2010, 06:42   #2
thomas
Registered User
thomas's Avatar
 
Join Date: Jan 2002
Location: Germany
Posts: 6,086
- deactivate all virus checkers, bootblock protectors or everything else which could protect the CF card from being written to
- use diskpart to clean the CF card before you use it
- remove the CF card safely and plug it back in after cleaning and before you use it in WinUAE
- be sure to have ticked the r/w checkbox in WinUAE's add harddrive dialogue.

Quote:
And this also has a side effect, winXp wants to format my cf card after this happens (if i open the drive from windows)
This is a good sign. It means that WinUAE actually *has* written to the CF card, although it claims it couldn't.
thomas is offline  
Old 21 July 2010, 08:35   #3
clueless
Guessing my way round
clueless's Avatar
 
Join Date: Dec 2009
Location: England
Posts: 159
Im sure thomas' help will sort it, he is excellent, but have had similar problems and I sorted it by using the real amiga to prep the card, then using it in winuae to install workbench etc worked.
clueless is offline  
Old 21 July 2010, 15:56   #4
MoreGrog
Registered User
 
Join Date: Jul 2010
Location: Norway
Posts: 10
Thanks for the suggestions.
I think the problem might be the card reader i have. It managed to
destroy the directory on a sd card with photos.
I'm getting a new one to be sure.
MoreGrog is offline  
Old 21 July 2010, 16:08   #5
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 45
Posts: 24,060
WinUAE does extra check when real harddrive block zero is written:

- write block zero
- read block zero
- show "block zero write failed" dialog if data does not match

This test was added because in some situations write function does not report any errors but nothing is written to the disk either. (afaik for example when drive is mounted in Windows)
Toni Wilen is offline  
Old 21 July 2010, 21:30   #6
MoreGrog
Registered User
 
Join Date: Jul 2010
Location: Norway
Posts: 10
Yes, as i suspected. The new card reader i bought today solved
all my problems. I have partitioned the CF card into 3 partitions.
And I have formatted the partitions.

Edit:
And I managed to get fat95 and cfd installed.
Tested it on real hardware. Boots nicely from the 2gb harddrive.
And when inserting a pcmcia card I can browse the contents of a SD 1gb card with some .adf files i found.
I Wouldnt have managed all this without WinUae. Because I dont have any of the Workbench or Kicstart disks. Lost them somewhere.

Last edited by MoreGrog; 22 July 2010 at 17:25. Reason: Want to hug WinUae
MoreGrog is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
"Exception "Line 1111 Emulator" ($2c) Error at $1004" when exiting game demolition support.WinUAE 15 30 November 2012 16:43
"Error validating disk" message.. what's wrong? scifi Hardware mods 4 19 November 2011 21:28
block zero write failed ? terexuk support.Hardware 5 14 June 2011 10:30
"CreateDevice failed" error with Direct3D filter on Maren support.WinUAE 20 02 February 2010 19:23
"Unpack.library failure" error message Another World New to Emulation or Amiga scene 1 16 December 2008 14:01

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 05:34.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.06710 seconds with 13 queries