04 February 2010, 18:00 | #21 |
I hate potatos and shirts
|
Just the Mitsumi keyboard with the Windows key caps replaced by the Amiga keys in my case.
The Amiga case will not have the necessary holes to page up/down/Home/Insert/F11/F12. Wait a minute and I'll upload the keyboard pictures. [EDIT] Done! BTW: this keyboard have a straight cord and regular (big-sized) DIN plug. Also you'll notice the A500's ALT keycap hooked in on the left of space bar. Last edited by rkauer; 04 February 2010 at 18:15. Reason: pictures added |
04 February 2010, 21:07 | #22 | |
a1200 68030 3.9 amysys
Join Date: Jan 2010
Location: ellesmere port/uk
Posts: 33
|
Quote:
then you can use them not perfect but better than nothing use a cheapo ps2 keyboard u can source a more fitting one colour wise at least the amiga atempted to be PC AT spec size wise with old limitations of earlyer design i think your mitsumi case would be posible with a bit of cutting here? remove the 3 keys above the page up keys we wont need em hope fully and maybe even wire the three leds up for caps lock ect not origonal but has to be better ? see pics ive uploaded to my gallery |
|
04 February 2010, 21:14 | #23 |
a1200 68030 3.9 amysys
Join Date: Jan 2010
Location: ellesmere port/uk
Posts: 33
|
sorry for doing a double post
being new here i just noticed how to atach files to post so results |
05 February 2010, 00:21 | #24 |
I hate potatos and shirts
|
Sorry, didn't like it.
My keyboard, as it is, gives the best retro-looking I'm after. Replacing just the winblows keys for Amiga ones makes it a perfect Amithlon/WinUAE (direct boot) machine. Not bad for a pc inside the A2000 case. |
05 February 2010, 11:59 | #25 |
a1200 68030 3.9 amysys
Join Date: Jan 2010
Location: ellesmere port/uk
Posts: 33
|
yes the keyboards fine but looks a bit modern next to a A2000
ok mate you wana see a 2000 keyboard with same treatment as the 1200 case ? if you are sensative dont look at the thread i started i feel like am taking over salax54's |
05 February 2010, 18:54 | #26 |
Registered User
Join Date: Jun 2008
Location: Athens Greece
Posts: 153
|
@bigfoot catnap: keep posting, you're not taking over my friend!
More pics ahead: Making the Mini's ethernet extension http://i298.photobucket.com/albums/mm242/salax54/25.jpg Mini's ethernet, and tv card's RF in http://i298.photobucket.com/albums/mm242/salax54/26.jpg Audio in/out, mic in for the pc part. http://i298.photobucket.com/albums/mm242/salax54/27.jpg VGA out extension for the pc graphics card http://i298.photobucket.com/albums/mm242/salax54/28.jpg Building the com port extension for the pc. http://i298.photobucket.com/albums/mm242/salax54/29.jpg Rear view. What's there, from left to right: 1Mac VGA out,power switch, audio out. 2PC audio in/out mic in, spare game port. 3PC VGA out. 4PC PS/2 mouse. http://i298.photobucket.com/albums/mm242/salax54/30.jpg Stay tuned! |
06 February 2010, 00:14 | #27 |
a1200 68030 3.9 amysys
Join Date: Jan 2010
Location: ellesmere port/uk
Posts: 33
|
cool aviodance of the wielding angle grinder my freind
and the apple mac mini in there too ive still more to do ah thought id killed the ps2 keyboard lol the amount ive cut it down to squeeze into the 2000 keyboard chassis is insane even had to un ergo it to a box shape the wire come off soon fix it with a bit of solder hopin to go usb as well for front pannel plugging so it can sit on desk an key board can be put out of way no nooo dont u dont need a keyboard garage ahhh: sorry jus havin some issues ive one of them baby usb key boards hmm usb amiga tank mouse is there a axeing smiley ?? |
06 February 2010, 23:49 | #28 |
a1200 68030 3.9 amysys
Join Date: Jan 2010
Location: ellesmere port/uk
Posts: 33
|
well shes here now typin on here workin away just put aros on fer now work
pritty sweet via origin webb browser jus pluggd a usb key board in got any sugestions what to use the two floppy bays for i dont use em any more and only have a single one anyway i did think of printing a pic of 2 drives and putin it on a blankin plate card reader perhaps |
07 February 2010, 15:08 | #29 |
Registered User
Join Date: Jun 2008
Location: Athens Greece
Posts: 153
|
Some more pics..
Here's some metalwork for the rear. http://i298.photobucket.com/albums/mm242/salax54/31.jpg http://i298.photobucket.com/albums/mm242/salax54/32.jpg And this is how the rear is today: http://i298.photobucket.com/albums/mm242/salax54/33.jpg http://i298.photobucket.com/albums/mm242/salax54/34.jpg http://i298.photobucket.com/albums/mm242/salax54/35.jpg as always, stay tuned! :-) |
10 February 2010, 16:43 | #30 |
Registered User
Join Date: Jun 2008
Location: Athens Greece
Posts: 153
|
Allright, here's a tough one:
Suppose i set up a UAE situation. Is it at all possible to have support for a genlock device? Before you rush to reply, i'd like to express a theory: A genlock (usually) connects to the RGB port of the Amiga. Which makes me believe that it requires a video signal of some sort. Now, we got a whole bunch of RGB-to-SCART, RGB-to-S-Video etc. adapters utilized with our actual Amigas. What if i take one of those and use a (UAE supported) graphics card of the kind that has an additional S-Video out, if i connect an RGB-to-S-Video adapter to it, would i be able to trigger the genlock? I've a few (both PAL and NTSC genlocks -which i paid a small fortune for back then) and find it very interesting if i could use them... |
10 February 2010, 18:04 | #31 |
a1200 68030 3.9 amysys
Join Date: Jan 2010
Location: ellesmere port/uk
Posts: 33
|
iive a bunch of old hardware for video
digimate for video captureing and rockwell vidieo mixers but dont see any apeal in using them? |
15 February 2010, 00:50 | #32 |
Registered User
Join Date: Jun 2008
Location: Athens Greece
Posts: 153
|
Time for an update
More cable mess! http://i298.photobucket.com/albums/mm242/salax54/36.jpg One of the (x86 part) hard disks. http://i298.photobucket.com/albums/mm242/salax54/37.jpg And the expansion cards, Graphics, TV tuner, and nic. http://i298.photobucket.com/albums/mm242/salax54/38.jpg http://i298.photobucket.com/albums/mm242/salax54/39.jpg http://i298.photobucket.com/albums/mm242/salax54/40.jpg To be continued.. |
26 February 2010, 18:10 | #33 |
Registered User
Join Date: Jun 2008
Location: Athens Greece
Posts: 153
|
Allrighty, a couple of amateur videos i've taken for the moment...
[ Show youtube player ] [ Show youtube player ] Sorry for the scan lines, but if i used a tft monitor i'd lose the "retro-feeling" :-) |
26 February 2010, 18:43 | #34 |
aka bigfoot catnap
Join Date: Feb 2010
Location: e port/uk
Posts: 101
|
yes im going to get some stud bar and strenthen the case front to rear
the mother board i had died the pci card slots stopped workin suspect flex in case |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
A2000 4.1 ... 1 Meg Chip Ram Mod? | Pioneer500 | support.Hardware | 4 | 10 May 2013 20:05 |
Kickstart mod for A2000 | jman | Hardware mods | 3 | 22 January 2012 12:22 |
Cyberstorm PPC hardware mod: 060@72MHz/PPC@396MHz | stachu100 | Hardware mods | 7 | 30 April 2010 15:26 |
A2000 Comp.Z Tower: info on floppy port mod... | keropi | support.Hardware | 14 | 17 May 2007 21:40 |
Looking for A2000 reset switch mod | Smiley | support.Hardware | 9 | 03 May 2006 17:48 |
|
|