23 March 2016, 05:54 | #1 |
Registered User
Join Date: Mar 2008
Location: Canada
Posts: 122
|
Indivision ECS A1000 Adapter in a A600 with A603: Does this work?
Hi All,
I have an Indivison ECS attached to the older A603 in my A600. I purchased an Indivision ECS Adapter which was "designed for" a A1000 with the hopes of using this setup without having to remove the floppy drive. Would this work in a A600? Physically, it fits but I just noticed that the tracings on the circuit of the adapter do not appear to be adapted pin-for-pin 100%. I have attached a picture of this adapter which is from Individual. PS: It was originally designed to go over the Paula chip of A1000 but I recall reading somewhere that this should technically work with the Denise chip also. Can anyone shed some light on this? Thanks! Regards, ed.. |
23 March 2016, 11:24 | #2 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,863
|
The case will not close with this.
|
23 March 2016, 14:00 | #3 |
Registered User
Join Date: Mar 2008
Location: Canada
Posts: 122
|
Hi Jope
Thx for reply. But will it still function correctly and safely? Regards Ed... |
23 March 2016, 14:49 | #4 |
-
Join Date: Jul 2003
Location: Helsinki / Finland
Age: 43
Posts: 9,863
|
This is just a bunch of wires as far as I understand, so yes. If it physically fits, it should still work.
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Indivision ECS - can't make it to work | springycz | support.Hardware | 11 | 06 March 2014 12:23 |
A603 Indivision Mod to keep the floppy drive in A600 | kipper2k | Hardware mods | 56 | 09 December 2011 17:53 |
Building an Adapter for ECS indivision in A600 to allow floppy usage | kipper2k | Hardware mods | 1 | 25 February 2011 20:33 |
Creating a flexi cable for the A600 ECS Indivision | kipper2k | Hardware mods | 38 | 22 February 2011 16:59 |
Indivision ECS Amiga 1000 Socket Adapter | amigakit.com | MarketPlace | 2 | 30 January 2010 15:21 |
|
|