13 April 2014, 18:57 | #1 |
Registered User
Join Date: Dec 2013
Location: Halifax
Posts: 225
|
ACA500 and boot CF with Kickstart 1.3
I have an ACA500 which I'd like to setup as a classic machine - Kickstart 1.3 with a Classic Workbench install from the Compact Flash. How do I go about this?
I CF drives appear if I boot with Kickstart 3.1 just fine but if I go into 1.3 and boot Workbench from my floppy none of the drives appear. I'm a little lost. |
13 April 2014, 19:01 | #2 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,506
|
Perhaps CF has KS 2.0+ filesystem partitions? (For example FFS-INTL, DOS\03) or it has normal DOS\01 FFS but no filesystem in RDB? KS 1.3 require KS 1.3 compatible FastFilesystem in RDB. KS 2.0+ has FFS in ROM.
What does C:Info in KS1.3 CLI output? (Not a dos disk?) |
13 April 2014, 19:09 | #3 |
Registered User
Join Date: Dec 2013
Location: Halifax
Posts: 225
|
Ram Disk Mounted.
Workbench1.3 Mounted. I suspect the CF is setup for Workbench3.1 as it came from AmigaKit and had a install script asking for the Workbench 3.1 floppies to create a clean install. Thank you. |
13 April 2014, 19:14 | #4 |
Registered User
Join Date: Dec 2013
Location: Halifax
Posts: 225
|
ah I see them now - was booting with the wrong kickstart option! Thank you!
|
14 April 2014, 08:31 | #5 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,506
|
What do you mean by wrong kickstart option? IDE driver on/off should be the only option needed to activate CF slots under 1.3.
2.0+ does not need it, ROM has internal driver but it is also older version. |
14 April 2014, 09:27 | #6 |
Registered User
Join Date: Dec 2013
Location: Halifax
Posts: 225
|
From the first page. I should had been using the F2 option not F4.
|
14 April 2014, 21:23 | #7 |
Registered User
Join Date: Dec 2013
Location: Halifax
Posts: 225
|
Hmm something still not right. No matter which compact flast card I use I can't boot directly from the card. All throw a checksum error on boot.
If I boot into workbench from floppy the drive is accessible but format / initialise always fails at the very end. Starting to not like this ACA500... |
14 April 2014, 21:30 | #8 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,506
|
I am 99.9% sure the card simply does not have fully KS 1.3 compatible setup and has nothing to do with ACA500. KS 1.3 has really strict HD filesystem requirements compared to KS 2.0+. (Setting up HD under KS 1.3 is also quite annoying, much easier under KS 2.0+)
Size of card? Size of partitions? Dostype of partitions? RDB installed filesystem version? (Any even slightly wrong and there will be trouble under KS 1.3) I'd of course recommend PFS3AIO EDIT: I use ACA500 for transferring data between PC and Amiga (mainly for emulation comparison purposes) using FAT formatted CF card and PFS3AIO formatted CF card, it works perfectly under KS 1.3. Last edited by Toni Wilen; 14 April 2014 at 21:37. |
14 April 2014, 21:52 | #9 |
Registered User
Join Date: Dec 2013
Location: Halifax
Posts: 225
|
PFS3AIO, thanks I'll check it out. Been trying a 256Mb card and a 4Gb which is partitioned in less than 1Gb chunks (I'm using the first partition for Workbench1.3). I'm sure I'll find a combination eventually!
|
14 April 2014, 21:56 | #10 |
WinUAE developer
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 49
Posts: 26,506
|
If you are using FFS and formatting under KS 1.3, make sure to use FFS format option or you get OFS format and OFS has 30-40M or so max partition size limit (format appears to work but you get errors sooner or later..).
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Can the ACA500 boot Workbench 1.3 from CF | gurth | support.Hardware | 2 | 02 March 2014 20:09 |
Getting WinUAE to boot from HDD with Kickstart 1.2 | 8bitbubsy | support.WinUAE | 12 | 17 April 2013 18:19 |
Custom Kickstart boot screen? | Amiga1992 | Hardware mods | 15 | 26 December 2011 12:54 |
Kickstart Switch / Dual Boot | craggus2000 | support.Hardware | 19 | 14 November 2010 07:30 |
3.1 Kickstart A600 slow boot | kipper2k | support.Hardware | 14 | 05 July 2009 11:48 |
|
|