WHDLoad problem on 3000T(040) - Page 2

alexh · 13 March 2006, 17:22

I stand corrected.

I posted my questions to the WHDload group AFTER I posted here.. to make sure

Chain · 14 March 2006, 11:05

* Give us details of your startup-sequence, user-startup and anything in the WB-STARTUP draw.

standard "from install" startup, in user startup are some assigns added (mui etc)

* List Name and slave version of the game that is not working.
* List the tool-types in the icon of the game that is not working.

lotus2, pinball fantasies, both are from killergorillas packs

* If you downloaded the Games off the interweb, check that there are no local copies of any WHDload core files (without icons) in the game directory (i.e. hacked WHDload's etc.)

no

* CRC check your Kickstart 1.3 ROM, make sure it's not an encrypted one

cant be encrypted,roms are grabbed from my a500 and a1200 with "grabkick" tool.

<b>game runs fine</b> but after approx one minute completely stops responding, and i can only quit from game by predefined key.

alexh · 15 March 2006, 01:28

LotusTurboChallengeIIWHD18.lzx ?

How much RAM do you have?

How much chip-ram is free before you launch the game?

Have you tried the NTSC tooltype, sounds stoopid, but sometimes that helps me.

Chain · 15 March 2006, 09:42

LotusTurboChallengeIIWHD18.lzx ? - Yes

How much RAM do you have? - 16m (fast), around 12m free

How much chip-ram is free before you launch the game? - 1.97xxxx m

Have you tried the NTSC tooltype, sounds stoopid, but sometimes that helps me.

nope, i will try it i hope amber will scan it properly...

Brosol · 28 January 2010, 15:13

I recently installed a registered whdload setup, Classic OS 3.9 on a CF for my A3000D. It has the same problems...Pinball Fantasies freezes up before the table selection screen. The games runs in A3000 configured WinUAE. I remember it ran fine loading from disks.

alexh · 28 January 2010, 15:47

You perhaps have other software installed which is interfering? Software which is not installed on your WinUAE HD

Brosol · 28 January 2010, 15:59

There is no difference since I am sharing the CF setup between the PC/WinUAE and A3000D. I tested games like Pinball Fantasies to run in WInUAE first.

alexh · 28 January 2010, 16:27

All you can do is tweak the WHDload tool types then. nocache, novbrmove, NTSC, etc.

The problem must be a non-emulated hardware conflict. Perhaps a caching thing.

Brosol · 29 January 2010, 09:38

I found two problems, the game works only in PAL and my LCD monitor can't display PAL modes. So setting the PAL tooltype and using a old SyncMaster 750s CRT fixed that so now Pinball Fantasies works on my A3000D

I need to find a LCD tha can display those modes or get a Indivision ECS Scandoubler / Flicker Fixer

alexh · 29 January 2010, 11:47

Or an RTG gfx card with scandoubler. e.g. Picasso IV or Cybervision 64

28 January 2010, 15:13	#25
Brosol Brosol Join Date: Jan 2010 Location: Vancouver, BC, Canada Posts: 85	Did you ever get Pinball Fantasies to work on A3000 I recently installed a registered whdload setup, Classic OS 3.9 on a CF for my A3000D. It has the same problems...Pinball Fantasies freezes up before the table selection screen. The games runs in A3000 configured WinUAE. I remember it ran fine loading from disks.

28 January 2010, 15:59	#27
Brosol Brosol Join Date: Jan 2010 Location: Vancouver, BC, Canada Posts: 85	There is no difference since I am sharing the CF setup between the PC/WinUAE and A3000D. I tested games like Pinball Fantasies to run in WInUAE first. Last edited by Brosol; 28 January 2010 at 16:04.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3000T problem	Marcelv	support.Hardware	3	19 June 2013 23:11
Problem with Amiga 3000T , Please help !	nscaleworld	support.Hardware	43	25 August 2012 16:23
Optimizing WHDLoad config for 040/060	8bitbubsy	project.WHDLoad	1	03 November 2011 22:37
how compatible is the 040 with whdload/in general?	CU_AMiGA	support.Hardware	8	22 April 2009 18:13
A1200(040/32m) WHDLoad Problems...	Crackersixx	project.WHDLoad	10	16 January 2006 12:36

13 March 2006, 17:22	#21
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,337	I stand corrected. I posted my questions to the WHDload group AFTER I posted here.. to make sure

14 March 2006, 11:05	#22
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 50 Posts: 1,536	* Give us details of your startup-sequence, user-startup and anything in the WB-STARTUP draw. standard "from install" startup, in user startup are some assigns added (mui etc) * List Name and slave version of the game that is not working. * List the tool-types in the icon of the game that is not working. lotus2, pinball fantasies, both are from killergorillas packs * If you downloaded the Games off the interweb, check that there are no local copies of any WHDload core files (without icons) in the game directory (i.e. hacked WHDload's etc.) no * CRC check your Kickstart 1.3 ROM, make sure it's not an encrypted one cant be encrypted,roms are grabbed from my a500 and a1200 with "grabkick" tool. <b>game runs fine</b> but after approx one minute completely stops responding, and i can only quit from game by predefined key.

15 March 2006, 01:28	#23
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,337	LotusTurboChallengeIIWHD18.lzx ? How much RAM do you have? How much chip-ram is free before you launch the game? Have you tried the NTSC tooltype, sounds stoopid, but sometimes that helps me.

15 March 2006, 09:42	#24
Chain A-Collector, repairments Join Date: Jul 2001 Location: Czech Rep. Age: 50 Posts: 1,536	LotusTurboChallengeIIWHD18.lzx ? - Yes How much RAM do you have? - 16m (fast), around 12m free How much chip-ram is free before you launch the game? - 1.97xxxx m Have you tried the NTSC tooltype, sounds stoopid, but sometimes that helps me. nope, i will try it i hope amber will scan it properly...

28 January 2010, 15:47	#26
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,337	You perhaps have other software installed which is interfering? Software which is not installed on your WinUAE HD

28 January 2010, 16:27	#28
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,337	All you can do is tweak the WHDload tool types then. nocache, novbrmove, NTSC, etc. The problem must be a non-emulated hardware conflict. Perhaps a caching thing.

29 January 2010, 09:38	#29
Brosol Brosol Join Date: Jan 2010 Location: Vancouver, BC, Canada Posts: 85	I found two problems, the game works only in PAL and my LCD monitor can't display PAL modes. So setting the PAL tooltype and using a old SyncMaster 750s CRT fixed that so now Pinball Fantasies works on my A3000D I need to find a LCD tha can display those modes or get a Indivision ECS Scandoubler / Flicker Fixer

29 January 2010, 11:47	#30
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,337	Or an RTG gfx card with scandoubler. e.g. Picasso IV or Cybervision 64

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)