FS-UAE not reading ISO in CD0 (Linux)

[Coreyoli]

Good evening,

I'm attempting to get an Amiga OS 4.1 system running within my Ubuntu 20.04 (KDE) Linux. I own Amiga Forever and OS 4.1, I have imported my Amiga Forever Kickstarters without an issue. The problem is when I select A4000 and the 3.1 w/OS 4.x support I "insert" the boot floppy and the ISO it comes up and says to insert the OS 4.1 Disc. This is the same ISO I installed OS 4.1 on my Windows machine without issue...

Now, if I select the 3.1 without OS 4.x support it looks like it MIGHT get further, the PPC kicks in (flashes the colors) but then freezes on a white screen. I have the QEMU plugin listed.

I have tried a bare bones config with just the A4000 3.1 PPC OS 4.x and, same thing, please insert volume.

Anyone ever see this before?

Thanks!

-Corey

(This is driving me nuts!!)

Here's my config:

# FS-UAE configuration saved by FS-UAE Launcher
# Last saved: 2020-08-22 21:35:42

[fs-uae]
accelerator = cyberstorm-ppc
accelerator_memory = 131072
amiga_model = A4000/OS4
cdrom_drive_0 = $HOME/Downloads/ClassicInstallCD-53.71.iso
cdrom_drive_count = 1
chip_memory = 2048
fast_memory = 8192
floppy_drive_0 = $HOME/Downloads/BootFloppy.adf
graphics_card = picasso-iv
graphics_memory = 4096
hard_drive_0 = a4000-part.hdf
motherboard_ram = 8192
network_card = a2065
sound_card = toccata
zorro_iii_memory = 262144

[Saghalie]

I have seen this before. Although not on a Linux system. I had to boot from
the floppy in order for my system to work.

I noticed that you are using the PATH assign for $HOME ... maybe switch that
to use the full PATH?

It's the only thing that I can think of.

Hope this helps!

[Saghalie]

Originally Posted by Saghalie

I have seen this before. Although not on a Linux system. I had to boot from
the floppy in order for my system to work.

I noticed that you are using the PATH assign for $HOME ... maybe switch that
to use the full PATH?

It's the only thing that I can think of.

Hope this helps!

Ignore that.

I was having the same issue. When I looked at my logs I found that the
ralphschmidt-cyberstorm-ppc-4471.rom I was using had an invalid CRC for
some reason and a file size of 'zero' ...

Check ralphschmidt-cyberstorm-ppc-4471.rom make sure it's the correct file.

BTW - I found this info by looking through my log files.

[Coreyoli]

Originally Posted by Saghalie

Ignore that.

I was having the same issue. When I looked at my logs I found that the
ralphschmidt-cyberstorm-ppc-4471.rom I was using had an invalid CRC for
some reason and a file size of 'zero' ...

Check ralphschmidt-cyberstorm-ppc-4471.rom make sure it's the correct file.

BTW - I found this info by looking through my log files.

Excellent! I'll check that out tomorrow...

Thanks much!