English Amiga Board Amiga Lore


Go Back   English Amiga Board > Support > support.Amix

 
 
Thread Tools
Old 17 May 2017, 21:50   #1
Leo24
Registered User

 
Join Date: May 2017
Location: Sao Paulo
Posts: 6
Something curious happened today...

Hi guys,

From time to time I make raw dumps from my Amiga SCSI drives under PC Linux with the dd command (dd if=/dev/sdX of=dump.hdf) and use these in WinUAE because, it's hard to admit, but dealing with WinUAE is nowadays more comfortable than with a real Amiga. I usually update my AmigaOS and tools, do some time killing stuff and once the system in WinUAE evolved enough for a while, I transfer the hard disk image back to the SCSI drive into my Amiga 3000.

Last weekend I thought, hey let's install AMIX in WinUAE using the tape drive method for a correct installation. Apply all the patches and additional drivers, compile some newer commands and tools. And finally install Workbench 1.3 and 3.1 in a tripple boot configuration. (I have one of those early A3000 with SuperKickstart support). WinUAE supports this quite well and helped me to experiment with various partition sizes and limits, since Kickstart 1.4beta and AMIX are quite picky about it. All the boot partitions including UNIX_Root and UNIX_Swap must be within the first 1GB range. Partitions beyond 1GB can be only formatted and used after Kickstart 3.1 has been loaded.

Now to the curious part. Once the tripple boot image was ready, I transferred it to my Ubuntu 17.04 64bit system where I already connected the SCSI hard disk and started dumping the image back to the drive with: dd if=dump.hdf of=/dev/sdX
Then the unexpected happened. As soon as dd finished the transfer, Ubuntu Linux suddenly mounted the UNIX_Root partition from the SCSI disk and the file manager popped up with the AMIX file contents. I was WTF???...

I have many times used this method to dump images containing AOS and NetBSD partitions, but Linux never detected any of those partitions. Now for the first time I had an AMIX partition and Linux was able to detect it. Of course, I rebooted Linux and tried again and yes, Linux detects UNIX_Root at sdb3. But how??? As far as I know PC Linux does not support Amiga RDB partition tables, otherwise it would also see the other partitions on the SCSI disk albeit not able to mount it. Very very strange.

Does someone know what's going on here?
Leo24 is offline  
AdSense AdSense  
Old 17 May 2017, 22:21   #2
jbl007
Registered User
 
Join Date: Mar 2013
Location: Leipzig/Germany
Posts: 331
Quote:
Originally Posted by Leo24 View Post
As far as I know PC Linux does not support Amiga RDB partition tables
In fact the Linux kernel does support Amiga partition tables but almost all distros disable it because nobody needs this nowadays (well except us of course ). Perhaps you are lucky and the Ubuntu guys just forgot to disable it in 17.04.
What's the output of
zgrep AMIGA /proc/config.gz
?

For me it says
# CONFIG_AMIGA_PARTITION is not set
jbl007 is offline  
Old 17 May 2017, 22:45   #3
Locutus
Registered User

 
Join Date: Jul 2014
Location: Finland
Posts: 705
Debian for example does ship with a kernel supporting RDB partition maps and FFS Filesystem modules. (Partition map support cant be built as a module by the way)

AMIX Partitions aren't Amiga FFS though but some flavour of UFS which of course Linux also supports :-)
Locutus is offline  
AdSense AdSense  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Curious about Natami Pat the Cat Amiga scene 13 07 January 2017 22:16
Curious of status of Classic market Overflow Retrogaming General Discussion 6 27 December 2016 01:01
Curious claim about The 64 Emulator 2 Rixa request.Apps 0 04 September 2010 17:19
Curious non-Amiga related find here.... MethodGit MarketPlace 6 20 May 2005 12:30
Just curious: UAE and 640*2xx screen modes? Korodny New to Emulation or Amiga scene 4 10 December 2001 12:16

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 07:36.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Page generated in 0.11633 seconds with 13 queries