How to get a A1200 emulation working right...

20 December 2002, 22:22

Ok, I'm a n00b, a fool and I almost certainly need to RTFM, now onto business.

I set up WinUAE with the following settings:
2MB Chip
020 precessor
Match A500
A 3.1 rom
All display options off (scanline selected)
OpenGL off
A blank disk in DF0: (all others disabled)
AGA chipset (fast copper only, sprites only)
Sound on

And I get a blank screen, but if I run something noisy (like a game) I hear the sound but still have a blank screen, what am I doing wrong?

20 December 2002, 22:29

you can upload your config file (.uae file in your configurations directory) to the message you post. This way we can check it

Which winuae version do you use?

20 December 2002, 22:37

This is Wraith Jones, I just registered, here's the config I'm using. I'm using the latest version of WinUAE (unless they uploaded a new version the past 6 hours). Cool avvie by the way, although I usually took the Brigand.

20 December 2002, 23:02

I tried to run silk worm with your config and it worked perfectly BUT did not display well. just tick horizontal and vertical centering and set the line mode to doubled

If you're trying to run the thing with that BLANK adf inserted, you can naturally get nothing at all.

And thanks, I like this avatar. We have a navvie as well

20 December 2002, 23:22

Shouldn't I get the 'please insert a disk screen' if I put a blank in though?

22 December 2002, 11:46

That screen appears when there are no disks inserted and no harddrives are available!

Toni Wilen · 22 December 2002, 11:52

Quote:

And I get a blank screen,

8-bit fullscreen mode? 8-bit isn't supported in AGA modes. Try 16 or 32..

22 December 2002, 14:41

Cracked it, it was a fullscreen problem, althouhg if you'd like tohelp further then go to Game Probelms and help me with Second Samurai.

20 December 2002, 22:22	#1
Wraith Jones Posts: n/a	How to get a A1200 emulation working right... Ok, I'm a n00b, a fool and I almost certainly need to RTFM, now onto business. I set up WinUAE with the following settings: 2MB Chip 020 precessor Match A500 A 3.1 rom All display options off (scanline selected) OpenGL off A blank disk in DF0: (all others disabled) AGA chipset (fast copper only, sprites only) Sound on And I get a blank screen, but if I run something noisy (like a game) I hear the sound but still have a blank screen, what am I doing wrong?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NetBSD with A1200/A4000 IDE emulation	mark_k	support.WinUAE	24	23 January 2013 23:03
FS-UAE with A1200 emulation on netbook	liveevil	support.FS-UAE	1	24 November 2012 23:07
Commodore 64 emulation on A1200	pubzombie	New to Emulation or Amiga scene	2	20 February 2011 16:03
CD32 games not working on winuae'CD32 emulation	laser	support.WinUAE	8	03 July 2007 21:49
cd32 emulation on real a1200 ?	kas1e	New to Emulation or Amiga scene	10	22 October 2005 12:03

20 December 2002, 22:29	#2
oldpx Posts: n/a	you can upload your config file (.uae file in your configurations directory) to the message you post. This way we can check it Which winuae version do you use?

20 December 2002, 23:02	#4
oldpx Posts: n/a	I tried to run silk worm with your config and it worked perfectly BUT did not display well. just tick horizontal and vertical centering and set the line mode to doubled If you're trying to run the thing with that BLANK adf inserted, you can naturally get nothing at all. And thanks, I like this avatar. We have a navvie as well

20 December 2002, 23:22	#5
Cadmus Posts: n/a	Shouldn't I get the 'please insert a disk screen' if I put a blank in though?

22 December 2002, 11:46	#6
oldpx Posts: n/a	That screen appears when there are no disks inserted and no harddrives are available!

22 December 2002, 14:41	#8
Cadmus Posts: n/a	Cracked it, it was a fullscreen problem, althouhg if you'd like tohelp further then go to Game Probelms and help me with Second Samurai.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)