CWB missing drives

Lorfarius · 15 November 2017, 22:07

Ran through a full install tonight to prep a card via WINUAE, used an 8GB SD card (have a CF adaptor) and partitioned it with PFS3. Before the install I could see a System partition, Games 1 and 2 on the WB whenever I booted a disk.

Once I'd run through an install of CW all the partitioned drives disappeared and couldn't be seen in the HDToolbox. Was messing for ages with no joy then I restarted with a WB3.1 disk and every single one of them appeared on the HD... but not CWB. Any idea what I did wrong?

thomas · 16 November 2017, 08:33

Not enough information but it might be that you enabled a scsi.device patch for the wrong Amiga model.

Lorfarius · 16 November 2017, 17:41

Quote:

Originally Posted by thomas

Not enough information but it might be that you enabled a scsi.device patch for the wrong Amiga model.

Still no joy. Can get to the CW without issue but no matter which option I choose for the drive it just doesn't appear. Yet if I stick in a WB3.1 disk the drives pop up.

Lorfarius · 16 November 2017, 20:35

Not sure what else to do... anyone? Been at this for hours and still can't get it to appear. Did try adding the 8GB SCSI file to the DEVs folder. Still nothing loads for the drives, even made sure to repartition the drive, can see it on 3.1 but not CWB

thomas · 16 November 2017, 22:22

Run this when the drives have disappeared (i.e. from the 3.1 disk, but with only a reset, not power off/on):
http://thomas-rapp.homepage.t-online.../hddreport.lha

Lorfarius · 17 November 2017, 23:25

Quote:

Originally Posted by thomas

Run this when the drives have disappeared (i.e. from the 3.1 disk, but with only a reset, not power off/on):
http://thomas-rapp.homepage.t-online.../hddreport.lha

Whilst I was trying to set it up I started playing around with the settings. Changed the types and number and.... everything appeared! I can now access the lot, so thank you

15 November 2017, 22:07	#1
Lorfarius Registered User Join Date: Jan 2010 Location: Glossop/UK Posts: 532	CWB missing drives Ran through a full install tonight to prep a card via WINUAE, used an 8GB SD card (have a CF adaptor) and partitioned it with PFS3. Before the install I could see a System partition, Games 1 and 2 on the WB whenever I booted a disk. Once I'd run through an install of CW all the partitioned drives disappeared and couldn't be seen in the HDToolbox. Was messing for ages with no joy then I restarted with a WB3.1 disk and every single one of them appeared on the HD... but not CWB. Any idea what I did wrong?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wb3 to 3.1 and CWB upgrade.	vertigo	support.Apps	2	24 May 2015 00:33
2 Problems in CWB	skydope	project.ClassicWB	12	07 December 2011 12:50
Help, need a CWB refresher please!	rave	project.ClassicWB	9	03 January 2011 16:08
Drives, Drives Everyehere!	Mick_AKA	Retrogaming General Discussion	46	08 July 2008 14:05
replacing amiga floppy drives with hard drives	Gordon	support.Hardware	2	06 March 2007 00:44

16 November 2017, 08:33	#2
thomas Registered User Join Date: Jan 2002 Location: Germany Posts: 6,985	Not enough information but it might be that you enabled a scsi.device patch for the wrong Amiga model.

16 November 2017, 20:35	#4
Lorfarius Registered User Join Date: Jan 2010 Location: Glossop/UK Posts: 532	Not sure what else to do... anyone? Been at this for hours and still can't get it to appear. Did try adding the 8GB SCSI file to the DEVs folder. Still nothing loads for the drives, even made sure to repartition the drive, can see it on 3.1 but not CWB

16 November 2017, 22:22	#5
thomas Registered User Join Date: Jan 2002 Location: Germany Posts: 6,985	Run this when the drives have disappeared (i.e. from the 3.1 disk, but with only a reset, not power off/on): http://thomas-rapp.homepage.t-online.../hddreport.lha

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)