WB 3.1 not booting

[Mike UK]

please delete thread

[musashi5150]

Perhaps you were using a pirated WHDLoad key??

[Mike UK]

Originally Posted by musashi5150

Perhaps you were using a pirated WHDLoad key??

Nope why would i do such a thing? its only 15 quid.

[Peter]

What was the game ? - it may be the case that you might need to get a later slave file for it from a later version of the install from the WHDload website - that has worked for me on WHDload games that have crashed out on me...

[Mike UK]

Originally Posted by Peter

What was the game ? - it may be the case that you might need to get a later slave file for it from a later version of the install from the WHDload website - that has worked for me on WHDload games that have crashed out on me...

WHDload is the newest version cant remember what the game is called though

[Zetr0]

heys mike,

when WHD loads a slave it takes over the system when it exits incorrecty i can leave workbench in somewhat of a pickle.

you can re-assign ENV to either RAM: or Workbench:

[Mike UK]

i did assign ENV: RAM and then quit the cli and that took me to the workbench screen (although whdload no longer works)

then after a restart same error.

[Zetr0]

if you edit your s:startup-sequence to include the assignment of ENV to ram: all should be good.

I am supprised as to why it hasn`t been included allready..

have you tried re-installing WHDload? obvioulsy after deleting it LOL

Oh and is this happening for every slave you try?

[Mike UK]

This is my startup sequence file any idea where i should add the ENV to RAM line?

; $VER: Startup-Sequence_HardDrive 40.2 (25.2.93)
; Startup-Sequence for hard drive systems

C:SetPatch QUIET

;CD32 Startup added by Squirrel SCSI Installation
IF EXISTS S:CD32-Startup
C:Assign T: RAM:
Execute S:CD32-Startup
EndIF
;End CD32 Startup


C:Version >NIL:
C:AddBuffers >NIL: DF0: 15
FailAt 21

C:MakeDir RAM:T RAM:Clipboards RAM:ENV RAM:ENV/Sys
C:Copy >NIL: ENVARC: RAM:ENV ALL NOREQ

Resident >NIL: C:Assign PURE
Resident >NIL: C:Execute PURE

Assign >NIL: ENV: RAM:ENV
Assign >NIL: T: RAM:T
Assign >NIL: CLIPS: RAM:Clipboards
Assign >NIL: REXX: S:
Assign >NIL: PRINTERS: DEVS:Printers
Assign >NIL: KEYMAPS: DEVS:Keymaps
Assign >NIL: LOCALE: SYS:Locale
Assign >NIL: LIBS: SYS:Classes ADD
Assign >NIL: HELP: LOCALE:Help DEFER

BindDrivers
C:Mount >NIL: DEVSOSDrivers/~(#?.info)

IF EXISTS DEVS:Monitors
IF EXISTS DEVS:Monitors/VGAOnly
DEVS:Monitors/VGAOnly
EndIF

C:List >NIL: DEVS:Monitors/~(#?.info|VGAOnly) TO T:M LFORMAT "DEVS:Monitors/%s"
Execute T:M
Celete >NIL: T:M
EndIF

SetEnv Language "english"
SetEnv Workbench $Workbench
SetEnv Kickstart $Kickstart
UnSet Workbench
UnSet Kickstart

C:AddDataTypes REFRESH QUIET
C:IPrefs
C:ConClip

Path >NIL: RAM: C: SYS:Utilities SYS:Rexxc SYS:System S: SYS:Prefs SYS:WBStartup SYS:Tools SYS:Tools/Commodities

IF EXISTS S:User-Startup
Execute S:User-Startup
EndIF

Resident Execute REMOVE
Resident Assign REMOVE

C:LoadWB
EndCLI >NIL:

[Mike UK]

http://www.yourfilehost.com/media.ph...artup_Sequence
Link to file

Also noticed if i go to the cli and type whdload at the end i also get whdload failed returncode 10

Cheers

Mike

[Zetr0]

sounds to me that your whd load install is damaged.

I would recomend that you delete your current whdload and install a new version.

your startup-sequence already has the assign for ENV: in RAM

[Mike UK]

Sorted think the install was dodgy re installed wb 3.1 and whdload and alls fine now

..that reminds me i better register whdload