English Amiga Board


Go Back   English Amiga Board > Support > support.WinUAE

 
 
Thread Tools
Old 16 July 2019, 21:18   #21
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 44
Posts: 22,932
Quick reply: it is identical to already dumped ROM 6.12. Which contains 6.10 (26.08.95) device driver and some other modules, password login related modules are 6.12 (29.01.96)

EDIT: Trifecta driver isn't very good, if I am not totally wrong, it only supports FFS in RDB and only if it is the only filesystem installed in RDB. Any other filesystem = all filesystems are ignored.. Nice hardware (A500 compatible true DMA HD controllers aren't that common, almost all of them are PIO except Commodore A590 and GVP series II), stupid driver..

Last edited by Toni Wilen; 17 July 2019 at 12:02.
Toni Wilen is offline  
Old 17 July 2019, 13:54   #22
peo
Registered User
 
Join Date: Dec 2008
Location: Ursviken
Posts: 70
Dump from Trumpcard 500 (SCSI), with Meta4 and Supra RAM expansion.
Did three different on this (without any crash), whole address space, start from offset + full size, start from offset + remaining size.

DiskSpeed results:
http://peo.yliniemi.se/amiga/HD/Disk...d_500_SCSI.txt
Attached Thumbnails
Click image for larger version

Name:	TC500SCSI-Meta4-Supra500RX.jpg
Views:	38
Size:	94.3 KB
ID:	63786  
Attached Files
File Type: zip Trumpcard500SCSI.zip (38.6 KB, 23 views)
peo is offline  
Old 17 July 2019, 14:46   #23
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 44
Posts: 22,932
Quote:
Originally Posted by peo View Post
Dump from Trumpcard 500 (SCSI)
Same as already dumped v4.9 IVS Trumpcard ROM.

I'd have expected more "random" versions but two boards having exactly same ROM versions as previous dump feels unexpected. Unless almost all produced boards had same version and only some early/pre-release versions had older versions.
Toni Wilen is offline  
Old 21 July 2019, 21:36   #24
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 44
Posts: 22,932
Do you have Trifecta manual or install disk (newer than the one in amiga.resource.cx)?

I'd like to know what mysterious jumpers A to E do. At least two of them must be related to EC/LX model (driver reads them and jumps here and there depending on jumper states..). Perhaps manual explains it. (or not, "reserved" is also possibility..)
Toni Wilen is offline  
Old 21 July 2019, 23:31   #25
peo
Registered User
 
Join Date: Dec 2008
Location: Ursviken
Posts: 70
Quote:
Originally Posted by Toni Wilen View Post
Do you have Trifecta manual or install disk (newer than the one in amiga.resource.cx)?

I'd like to know what mysterious jumpers A to E do. At least two of them must be related to EC/LX model (driver reads them and jumps here and there depending on jumper states..). Perhaps manual explains it. (or not, "reserved" is also possibility..)
Have both the disk and manual (but not scanned,yet). Don't know if either is of any newer version than available elsewhere. I can check and scan/photo the page (if any) about those mysterious jumpers.

The installation floppy is attached.
Attached Files
File Type: zip ICDPrepHD.zip (105.8 KB, 19 views)
peo is offline  
Old 22 July 2019, 00:21   #26
peo
Registered User
 
Join Date: Dec 2008
Location: Ursviken
Posts: 70
Trifecta jumpers

Pages 22 and 30 from the hardware manual explains them.
Attached Thumbnails
Click image for larger version

Name:	Trifecta Hardware Installation Manual page 22.jpg
Views:	39
Size:	853.8 KB
ID:	63848   Click image for larger version

Name:	Trifecta Hardware Installation Manual page 30.jpg
Views:	35
Size:	616.4 KB
ID:	63849  
peo is offline  
Old 22 July 2019, 09:01   #27
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 44
Posts: 22,932
Quote:
Originally Posted by peo View Post
Pages 22 and 30 from the hardware manual explains them.
Thanks. So it was boot delay, not model detection. (I thought it was hung accessing non-existing scsi but it was only waiting 24s.. Left mouse button also seems to abort the wait)

Driver disk has same driver version as amiga.resource.cx. I guess it didnt't need updating when boot rom driver was updated.
Toni Wilen is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Advanced UAE expansion board/Boot ROM Settings DaMi support.WinUAE 3 16 November 2017 13:54
What is this expansion board? Sanxion support.Hardware 7 10 September 2017 21:46
What kind of expansion board is that ? salocinx Hardware pics 12 01 January 2015 09:29
Tell me about my expansion board. gazj82 support.Hardware 7 22 March 2014 23:25
How can I grab the kick.rom from my A3000 with 68040 board? kplo New to Emulation or Amiga scene 2 26 March 2011 05:28

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 02:58.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Page generated in 0.06629 seconds with 15 queries