PFS3AIO v3.1 Final - Page 4

supaduper · 21 February 2018, 22:55

FS uae error log

Attachment 56926

indigolemon · 21 February 2018, 23:22

Can confirm no issues with Test 3 on a real A1200 here - cheers Toni

malko · 22 February 2018, 00:08

On my side, FS-UAE boots fine with the PFS3aio-test3

.

@Foul : Maybe there is something wrong with your config file. I have noticed that, for your HD, you use two options that are not available in the FS-UAE option page. It's uae_filesystem2 & uae_uaehf0 .
I have seen these entries in the logs files (but more complete than yours), so try to change your configuration according to the documented options (or are those two options needed to access the CF on the Amiga side ?)
Even if we have different configs, you can check mine here

When you have your CF back, don't forget to give a feedback

.

Toni Wilen · 22 February 2018, 08:20

Quote:

Originally Posted by supaduper

FS uae error log

Quote:

Partition 'DH0' Dostype=5244534B (RDSK) Flags: 00000000

Huh? Looks like RDB hardfile is mounted as partition hardfile.

supaduper · 22 February 2018, 08:26

Quote:

Originally Posted by Toni Wilen

Huh? Looks like RDB hardfile is mounted as partition hardfile.

Hi Toni, what does that mean ? as I am not a Guru !

Toni Wilen · 22 February 2018, 08:45

Quote:

Originally Posted by supaduper

Hi Toni, what does that mean ? as I am not a Guru !

There probably is some parameter that tells fs-uae to mount it as RDB hardfile. "RDSK" identifier really should do it automatically.

EDIT: If drive was partitioned in partition hardfile-mode, it may not have fully valid RDB or some other corruption.

Foul · 22 February 2018, 09:07

Quote:

Originally Posted by malko

@Foul : Maybe there is something wrong with your config file. I have noticed that, for your HD, you use two options that are not available in the FS-UAE option page. It's uae_filesystem2 & uae_uaehf0 .

Both are disabled... i only use hard_drive_0 = /dev/sdf for the test... (Real Compact Flash on USB Adapter)

supaduper · 22 February 2018, 10:00

Quote:

Originally Posted by Toni Wilen

There probably is some parameter that tells fs-uae to mount it as RDB hardfile. "RDSK" identifier really should do it automatically.

EDIT: If drive was partitioned in partition hardfile-mode, it may not have fully valid RDB or some other corruption.

Thanks Toni, I do not use FS uae anyway so I am not going to worry about it as Winuae is my preferred emulator

Foul · 22 February 2018, 11:04

Backup done.
Update to test #3 : done
system upgraded to CFS\00

All is Working normally

I checked each partitions with PFSdodctor.. and it's 10x times faster !!!

Toni Wilen · 22 February 2018, 11:19

CFS dostype is always wrong. (Don't ask in this thread, search for it)

ShK · 22 February 2018, 12:27

Quickly testing >4G filesize support works. Nice work Toni!

Tested with 500G Hitachi drive with the one big bootable PFS3AIO partition.

Formating with >4G filesize support enabled:

Copying a file back and forth, and CRC compare:

TuKo · 22 February 2018, 12:36

This is quite an improvement ! Congrats !

Toni Wilen · 22 February 2018, 12:44

Quote:

Originally Posted by ShK

Quickly testing >4G filesize support works.

"Appears to work". It needs lots of testing and updated pfsdoctor checking and more..

EDIT: Also which 64-bit packets are needed to enable >4G file access without too many restrictions.

Jope · 22 February 2018, 16:01

I have a 18GB SCSI disk. I installed it into a GVP Series II (4.15) with 8MB RAM, used the HDToolBox from the 2.1 install disk to partition it. One large partition spanning the entire drive.

I installed a genuine registered PFS3DS onto the RDB, 0x50465303.

Then I moved the disk to the PC, UAEHF unit 0. Formatted, installed WB2.1 on there. After that I deleted PFS3DS from the RDB, installed pfs3aio test3 in its place with the same dostype.

I rebooted the emulator, still works fine. Killed the emulator, restarted from this disk, still works fine.

Now I moved the disk back to the GVP and:
Read Error 0 on block 3404
Make sure disk is inserted

Read Error 6 on block 12522
Make sure disk is inserted

Device IDH0:
Could not read rootblock extension

Device IDH0:
ALERT:
Wrong index block id X, expected X, Block 0, 21314, 16255690 (not sure if this continues offscreen, Topaz/9)

malko · 22 February 2018, 17:36

Quote:

Originally Posted by Foul

Both are disabled... i only use hard_drive_0 = /dev/sdf for the test... (Real Compact Flash on USB Adapter)

No no no

. The two mentioned lines are not commented in the file you have posted (post #47)

.

Foul · 22 February 2018, 17:39

you're right ! it's my Default.fs-uae here at work... sorry..
At home.. it's commented

The rest are the same...

kolla · 22 February 2018, 17:41

Quote:

Originally Posted by Toni Wilen

I forgot, will be in next update. (Also UAE directory filesystem needs this, odd that no one has ever mentioned it?)

That's why I formulated myself the way I did, sort og hinting at other filesystems

Jope · 22 February 2018, 20:55

Quote:

Originally Posted by Jope

I have a 18GB SCSI disk. I installed it into a GVP Series II (4.15) with 8MB RAM, used the HDToolBox from the 2.1 install disk to partition it. One large partition spanning the entire drive.

False alarm, there were problems with the old PFS3DS using this drive too. It wasn't a fair setup at all, a U160 drive on an old controller.

My search continues, I have a pile of drives I still need to go through. :-)

Sinphaltimus · 23 February 2018, 01:07

PFS3aioTest3 successfully applied to my Vampirized A500 Apollo OS r43 SSD. After successful reboot, PFSDoctor is happy with all devices.

DH0:777MB, DH2:512MB and DH1:27.5GB

- Thank you.

Toni Wilen · 23 February 2018, 19:52

Test 4 released. Final soon..

21 February 2018, 22:55	#61
supaduper Registered User Join Date: Oct 2012 Location: Krypton Posts: 1,210	FS uae error log Attachment 56926 Last edited by supaduper; 01 June 2020 at 14:57.

22 February 2018, 00:08	#63
malko Ex nihilo nihil Join Date: Oct 2017 Location: CH Posts: 4,856	On my side, FS-UAE boots fine with the PFS3aio-test3 . @Foul : Maybe there is something wrong with your config file. I have noticed that, for your HD, you use two options that are not available in the FS-UAE option page. It's uae_filesystem2 & uae_uaehf0 . I have seen these entries in the logs files (but more complete than yours), so try to change your configuration according to the documented options (or are those two options needed to access the CF on the Amiga side ?) Even if we have different configs, you can check mine here When you have your CF back, don't forget to give a feedback . Attached Thumbnails Last edited by malko; 22 February 2018 at 00:51.

22 February 2018, 12:27	#71
ShK Registered User Join Date: Mar 2013 Location: Lahti / Finland Age: 52 Posts: 447	Quickly testing >4G filesize support works. Nice work Toni! Tested with 500G Hitachi drive with the one big bootable PFS3AIO partition. Formating with >4G filesize support enabled: Copying a file back and forth, and CRC compare: Last edited by ShK; 22 February 2018 at 12:35.

22 February 2018, 16:01	#74
Jope - Join Date: Jul 2003 Location: Helsinki / Finland Age: 43 Posts: 9,861	I have a 18GB SCSI disk. I installed it into a GVP Series II (4.15) with 8MB RAM, used the HDToolBox from the 2.1 install disk to partition it. One large partition spanning the entire drive. I installed a genuine registered PFS3DS onto the RDB, 0x50465303. Then I moved the disk to the PC, UAEHF unit 0. Formatted, installed WB2.1 on there. After that I deleted PFS3DS from the RDB, installed pfs3aio test3 in its place with the same dostype. I rebooted the emulator, still works fine. Killed the emulator, restarted from this disk, still works fine. Now I moved the disk back to the GVP and: Read Error 0 on block 3404 Make sure disk is inserted Read Error 6 on block 12522 Make sure disk is inserted Device IDH0: Could not read rootblock extension Device IDH0: ALERT: Wrong index block id X, expected X, Block 0, 21314, 16255690 (not sure if this continues offscreen, Topaz/9) Last edited by Jope; 22 February 2018 at 17:17.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
PFS3aio vs SFS/02	White	support.WinUAE	10	13 April 2018 21:44
PFS3AIO Probs ?	Foul	support.FS-UAE	0	21 February 2018 22:49
PFS3AIO Questions	manic23	support.Hardware	26	22 April 2014 13:49
Pfs3aio ????	stingray76	support.Hardware	2	19 February 2014 09:15
FinalWriter 97; FinalCalc 1.04; Final Data 2.00 & Final Copy	aebrown-u	request.Apps	20	12 July 2009 11:19

21 February 2018, 23:22	#62
indigolemon Bit Copying Bard Join Date: Jan 2017 Location: Kelty, Fife, Scotland Age: 41 Posts: 1,293	Can confirm no issues with Test 3 on a real A1200 here - cheers Toni

22 February 2018, 11:04	#69
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	Backup done. Update to test #3 : done system upgraded to CFS\00 All is Working normally I checked each partitions with PFSdodctor.. and it's 10x times faster !!!

22 February 2018, 11:19	#70
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	CFS dostype is always wrong. (Don't ask in this thread, search for it)

22 February 2018, 12:36	#72
TuKo Apollo Team Join Date: May 2014 Location: not far Posts: 379	This is quite an improvement ! Congrats !

22 February 2018, 17:39	#76
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	you're right ! it's my Default.fs-uae here at work... sorry.. At home.. it's commented The rest are the same...

23 February 2018, 01:07	#79
Sinphaltimus Registered User Join Date: Aug 2016 Location: Cresco, PA, USA Age: 53 Posts: 1,126	PFS3aioTest3 successfully applied to my Vampirized A500 Apollo OS r43 SSD. After successful reboot, PFSDoctor is happy with all devices. DH0:777MB, DH2:512MB and DH1:27.5GB - Thank you.

23 February 2018, 19:52	#80
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,502	Test 4 released. Final soon..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)