Sonnet 7200 PCI programming

[Hedeon]

I can't do anything with these 'it does not work' posts. Please read the wiki.

[deling]

Originally Posted by Hedeon

I can't do anything with these 'it does not work' posts. Please read the wiki.

Sorry , when I install killer k1 in my amiga 4000 after write line c:initppc in command prompt my amiga reboot and freeze I have clean system No more idea what is wrong

[nexus]

could be your PSU
also try reseating everything in the PCI slots
boot into WB with no startup like wiki says and follow try to init and see if it still happens

[deling]

All new , psu new caps mobo new caps battery never leaked
Mediator Voodoo 3 with etherner card work Nice
Tommorow will change slot for killer maybe help
Thanks

[nexus]

yes if you are using 4000D have the killer nic 2nd down from top and voodoo under it

[deling]

Originally Posted by nexus

yes if you are using 4000D have the killer nic 2nd down from top and voodoo under it

You are right but now after modify s-s „Now edit your startup-sequence (ed s:startup-sequence) to add Run >NIL: <NIL: C:InitPPC at any point after”

System Boot bo after few seconds Workbench freeze

[grelbfarlk]

Originally Posted by deling

You are right but now after modify s-s „Now edit your startup-sequence (ed s:startup-sequence) to add Run >NIL: <NIL: C:InitPPC at any point after”

System Boot bo after few seconds Workbench freeze

Put the initppc right before adddatatypes in startup-sequence. Usually what you're describing is either the datatypes loading and crashing or something WBStartup, either Amidock or DefIcons. If you want to make sure it's not in WBStartup make a WBstartup/Dis folder and put everything in WBStartup in there, or move them out of WBStartup altogether.

Other things to be wary of are asyncio.library in libs: there are many versions some with PPC support, some that are 68k only.

[deling]

Originally Posted by grelbfarlk

Put the initppc right before adddatatypes in startup-sequence. Usually what you're describing is either the datatypes loading and crashing or something WBStartup, either Amidock or DefIcons. If you want to make sure it's not in WBStartup make a WBstartup/Dis folder and put everything in WBStartup in there, or move them out of WBStartup altogether.

Other things to be wary of are asyncio.library in libs: there are many versions some with PPC support, some that are 68k only.

Thanks
Now is better system No freeze but after
Get info in cli I have this
Why cpu clock is 0000?

[marpla]

Originally Posted by deling

Thanks
Now is better system No freeze but after
Get info in cli I have this
Why cpu clock is 0000?

You must use the newer sonnet library:

https://sonnet.uguu.waw.pl/jenkins/job/sonnetamiga/

[deling]

Ok Thank will try

[Apollon]

is there anything new here? now have a k1! is working on expanding the RAM?

[Hedeon]

New version 17.11 on Aminet soon. Fixes some stuff with K1. K1/M1 try to use the VGA memory of a secondary Radeon card. (next to a Voodoo as primary). RadeonMemOS = yes, RadeonMem = 0.

Tests showed it to be veeeeeeeery slow.

[Marlon_]

Nice work!

[deling]

New build ready
http://aminet.net/package/driver/other/SonnetLibrary

[Hedeon]

Another update to github. Mostly for Radeon users. K1/M1 users get an extra 512kb to spend, yay.

[deling]

Originally Posted by Hedeon

Another update to github. Mostly for Radeon users. K1/M1 users get an extra 512kb to spend, yay.

I sold my killer k1 but thanks for all guys , good job

[trixster]

The sonnet for sale on Amibay is the same one I sold back in August. The guy has had it up on eBay for over for a month for $775. He now wants $680 which is still considerably more than I sold it to him for. Draw your own conclusions but I would call that profiteering.

[dayowalker]

Hi

there is an very interesting Open Source project about the Prometheus PCI expansion there on a1k forum.

https://www.a1k.org/forum/showthread.php?t=68433

Mr. Boehmer, the author, mentions Elbox and the SharkPPC in the license disclaimer. Could anyone explain the context?

Is the Sonnet/ equivalent card supposed to run with the Prometheus PCI expansion?

[marpla]

Hello, good news PPC programs do not slow down anymore but they hang up after a short while (Quake max. 3 min)

Maybe I configure the MMU incorrectly?
Here's my configuration:

7.System:> pciinfo

Pci Device 1:
VendorID: $10ec
VendorName: Realtek Audio/Lan　Maker
DeviceID: $8139
DeviceName: RTL-8139/8139C/8139D Realtek RTL8139 Family PCI Fast Ethernet NIC
ClassCode: $20000
RevisionID: $10
InterruptPin: 2
SubsystemVendorID: $10ec
SubsystemID: $8139
IOSpace0: $ed6000 - $ed60ff
MemSpace1: $30000000 - $300000ff
RomSpace: $30100000 - $3010ffff

Pci Device 2:
VendorID: $1274
VendorName: Ensoniq
DeviceID: $5880
DeviceName: 5880x Soundblaster (CT4750)
ClassCode: $40100
RevisionID: $4
InterruptPin: 3
SubsystemVendorID: $1274
SubsystemID: $2000
IOSpace0: $ed6100 - $ed613f

Pci Device 3:
VendorID: $1033
VendorName: NEC Electronics
DeviceID: $35
DeviceName: udp9210 Dual OHCI controllers plus Single EHCI controller
ClassCode: $c0310
RevisionID: $41
InterruptPin: 4
SubsystemVendorID: $1033
SubsystemID: $35
MemSpace0: $30200000 - $30200fff

Pci Device 4:
VendorID: $1033
VendorName: NEC Electronics
DeviceID: $35
DeviceName: udp9210 Dual OHCI controllers plus Single EHCI controller
ClassCode: $c0310
RevisionID: $41
InterruptPin: 1
SubsystemVendorID: $1033
SubsystemID: $35
MemSpace0: $30300000 - $30300fff

Pci Device 5:
VendorID: $1033
VendorName: NEC Electronics
DeviceID: $e0
DeviceName: uPD720100A uPD720102GC USB 2.0 Host Controller
ClassCode: $c0320
RevisionID: $2
InterruptPin: 2
SubsystemVendorID: $ee4
SubsystemID: $89e
MemSpace0: $30400000 - $304000ff

Pci Device 6:
VendorID: $1957
VendorName: Unknown
DeviceID: $86
DeviceName: Unknown
ClassCode: $b2000
RevisionID: $30
InterruptPin: 1
SubsystemVendorID: $1a56
SubsystemID: $201
MemSpace0: $30500000 - $305fffff

Pci Device 7:
VendorID: $121a
VendorName: 3dfx Interactive Inc
DeviceID: $5
DeviceName: Voodoo3 All Voodoo3 chips, 3000
ClassCode: $30000
RevisionID: $1
InterruptPin: 2
SubsystemVendorID: $121a
SubsystemID: $14
MemSpace0: $32000000 - $33ffffff
MemSpace1: $34000000 - $35ffffff
IOSpace2: $ed6200 - $ed62ff
RomSpace: $30600000 - $3060ffff


7.System:> muscan

MuScan 46.1 (02.07.2016) © THOR

68060 MMU detected.
MMU page size is 0x1000 bytes.

Memory map:
0x00000000 - 0x001FFFFF CacheInhibit Imprecise NonSerial
0x00200000 - 0x00A7FFFF CacheInhibit I/O space
0x00A80000 - 0x00BBFFFF Blank
0x00BC0000 - 0x00BFFFFF CacheInhibit I/O space
0x00C00000 - 0x00D7FFFF Blank
0x00D80000 - 0x00DFFFFF CacheInhibit I/O space
0x00E00000 - 0x00E9FFFF Blank
0x00EA0000 - 0x00EDFFFF CacheInhibit I/O space
0x00EE0000 - 0x00EFFFFF Blank
0x00F00000 - 0x00F7FFFF CopyBack
0x00F80000 - 0x00FFFFFF ROM CopyBack Remapped to 0x04F7C000
0x01000000 - 0x04F7BFFF CopyBack
0x04F7C000 - 0x04FFBFFF ROM CopyBack
0x04FFC000 - 0x04FFFFFF CopyBack
0x05000000 - 0x2047FFFF Blank
0x20480000 - 0x23F7FFFF CacheInhibit Blank
0x23F80000 - 0xFFEFFFFF Blank
0xFFF00000 - 0xFFF1FFFF CacheInhibit
0xFFF20000 - 0xFFFFFFFF Blank


7.System:> showconfig

PROCESSOR: CPU 68060/68060fpu/68060mmu
CUSTOM CHIPS: AA PAL Alice (id=$0023), AA Lisa (id=$00F8)
VERS: Kickstart version 45.57, Exec version 45.20, Disk version 45.5
RAM: Node type $A, Attributes $5 (FAST), at $1000000-$4FFFFFF (64.0 meg)
Node type $A, Attributes $2005 (FAST), at $20480000-$23F7FFFF (59.0 meg)
Node type $A, Attributes $703 (CHIP), at $4000-$1FFFFF (~2.0 meg)
BOARDS:
Board + ROM (HD?) (unidentified): Prod=8738/35($2222/$23) (@$EA0000 128K)
Board (Index Information Ltd): Prod=2206/60($89E/$3C) (@$EC0000 128K)
Board (Index Information Ltd): Prod=2206/188($89E/$BC) (@$200000 8meg)


7.System:> type ENVARC:MMU-Configuration

SetCacheMode from 0x01000000 size 0x04000000 Copyback
SetCacheMode from 0x20480000 size 0x03B00000 CacheInhibit
SetCacheMode from 0x00000000 size 0x00200000 CacheInhibit NonSerial Imprecise

;Memory setup end.

;
P5Init

[grelbfarlk]

Originally Posted by dayowalker

Hi

there is an very interesting Open Source project about the Prometheus PCI expansion there on a1k forum.

https://www.a1k.org/forum/showthread.php?t=68433

Mr. Boehmer, the author, mentions Elbox and the SharkPPC in the license disclaimer. Could anyone explain the context?

Is the Sonnet/ equivalent card supposed to run with the Prometheus PCI expansion?

Basically the rule is if you're working with Elbox, he wants one and a SharkPPC. If you're doing it on your own he wants one of the Prometheus boards you produce, they also have to be open source. That's pretty much it.


The Sonnetlib does not currently work with the Prometheus boards (that I've heard of) but with some work maybe they could be supported.


The Prometheus boards look to be not too bad to build your own, prices for the components appear to be less than $100.



Which is why I asked for this: http://eab.abime.net/showthread.php?t=95425


At any rate, seems like a good thing to do on general principles, maybe some of the longstanding Mediator bugs can be fixed, or just for the laughs.

@Marpla you shouldn't have that P5Init with an Apollo in your MMU-Configuration unless you're using a CSPPC.