15 July 2015, 13:20 | #101 |
Registered User
Join Date: Feb 2013
Location: Argentina
Posts: 281
|
|
20 July 2015, 07:38 | #102 |
Registered User
Join Date: May 2013
Location: Kleppe / Norway
Posts: 253
|
Highly appreciated both of you!
Will test it soon! |
25 July 2015, 11:08 | #103 |
Posts: n/a
|
I have some prolems. Soldered device like in 1st post, i have 4GB pendrive FAT16 or FAT32 formatted, after turning on power both LEDs on VNC1L flashes two-three times, pendrive LED flashes ones (shortly) and then nothing happens, all LEDs are OFF. On Amiga i have usb.device in Devs:, USB0 in DevsOSDrivers, after this command sequence:
> mount USB0: from Devsosdrivers/USB0 > USB0: shell hangs. Other processes are running without any problems, but i can't close shell window. My config: A4000, CSPPC 060@66 604e@233, UWSCSI HDD, CV64, XSurf-100, OS 3.9 with some modifications in s-s (blizkick). I also tried to update FTDI firmware (using VDAP 3.69) - copied file into root folder of pendrive, rename it to FTRFB.FTD and i think FTDI device doesn't read files on pendrive. |
27 July 2015, 19:13 | #104 |
Registered User
Join Date: Sep 2009
Location: Spain
Age: 46
Posts: 95
|
Hello Jenot,
First of all, we'll try to upgrade the VDIP1 to the latest VDAP firmware. To achieve it you must first set the jumpers for serial communication and power the interface WITHOUT attaching it to the Amiga. Once you plug the usb drive with the upgrade file it will start to upgrade the controller. This is because the VNC waits for the host to start the upgrade, and in parallel mode it's required to feed the controller with some bytes... over serial it's not needed. By other hand ensure your parallel port is fully working. This interface uses all the parallel port lines, so if one of them fail it won't work. I'll attach later a tiny test program for cheking the parallel port communication with the VNC-1L controller. |
27 October 2015, 17:21 | #105 |
Registered User
Join Date: Nov 2009
Location: GDR
Age: 49
Posts: 249
|
I also have this problem, it's not gone.
There are any news about vdip1 (or2) ? |
01 January 2017, 22:45 | #106 |
Registered User
Join Date: Dec 2016
Location: dronfield
Posts: 32
|
Did this ever get finished/working reliably? Looks good, would like one if it works, currently using a UAE-ADF-USB-Gotek to transfer files but its a bit of a faff.
|
31 January 2017, 01:44 | #107 |
Registered User
Join Date: Nov 2011
Location: Detroit
Posts: 58
|
+1
|
26 August 2017, 18:44 | #108 |
Posts: n/a
|
Help on A500 1.3
Hello,
I know this is an old thread, but I ve built the interface, and it doesn't seem to work on my A500 with KS 1.3: When I mount USB0: nothing special, usb0 is in the assign list When I type info, nothing about USB0: When I type USB0: or dir USB0: the lights on the VDIP1 flashes three or four times, and so does the light on the USB pen drive, and the Amiga just freeze completely, no more mouse movement or keyboard response... I know some of you had similar issues with KS 2.05 or 3.1, but it should work with my config... The only difference with Ferix test computer is that mine has a 4MB Baseboard expansion fitted, and 1 MB chip instead of 512 Kb. I tried removing all of the baseboard stuff, but same thing (freeze). Many thanks to everyone that could help me solve this issue, I really would like to get my USB interface working, as I only have a Gotek drive... JP |
08 October 2017, 02:18 | #109 |
Registered User
Join Date: Sep 2009
Location: Syd
Posts: 184
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
New USB HID mouse / USB Joystick / Gamepad USB adapter for the classic Amiga | spidi | News | 191 | 21 February 2021 19:18 |
PC 1.44 MB USB floppy drives | PopoCop | support.Other | 12 | 22 April 2011 18:23 |
replacing amiga floppy drives with hard drives | Gordon | support.Hardware | 2 | 06 March 2007 00:44 |
Oops I burned something! | oldpx | support.Hardware | 3 | 13 June 2004 01:45 |
|
|