1.5.1 screen corruption with CWBP96

DDNI · 22 August 2008, 01:16

Am messing here late at night. Not best time to fix a problem...

Getting full screen corruption with CWB96.
I am useless with UAE, so am sure there is an obvious cause...

Can anyone help me out please?
I have attached a screenshot and Log file.

Many thanks

Toni Wilen · 22 August 2008, 10:14

"Standard testing": same in windowed and fullscreen? Does changing "display buffer" to "systemram" fix it? (note that it also can cause major slowdown but it if fixes it = guaranteed display driver issue)

Quote:

DirectDraw_Fill: 88760037 S=1 F=0876 C=0037 (55) (An exception was encountered while performing the requested operation)

I think this really is display driver issue.. (some old laptop?)

Display card model? Newest driver version?

DDNI · 22 August 2008, 10:29

Hi Toni, sorry for the lame report

Windowed mode is fine.
Changing "display buffer" does not fix the issue.
Not a Laptop. It is a crossfire 2900xt system with latest drivers.
Changing p96 mode in WB does not fix the issue.

I am sure it is a I.D.10.T user error or Driver issue too... But still an real issue till I fix it...

Many thanks.

thomas · 22 August 2008, 17:58

Try 16bit screenmode instead of 32bit or vice versa.

DDNI · 22 August 2008, 20:37

Hi Thomas, I should have said. I have tried both 16 and 32 bit screenmodes.

Many thanks.

Toni Wilen · 22 August 2008, 20:40

winuaebootlog.txt please (I forgot to ask..)

Toni Wilen · 22 August 2008, 20:40

Does "An exception was encountered while performing the requested operation" also appear when you run in windowed mode?

DDNI · 22 August 2008, 20:44

Hi Toni, I dont get any exception window appearing in either windowed or fullscreen modes.

Toni Wilen · 22 August 2008, 20:46

Quote:

Originally Posted by DDNI

Hi Toni, I dont get any exception window appearing in either windowed or fullscreen modes.

I meant the log message. See my first reply.

DDNI · 22 August 2008, 20:58

Quote:

Originally Posted by Toni Wilen

I meant the log message. See my first reply.

Hi Toni, I posted logs for both Fullscreen and Windowed. The exception doesnt seem to appear in the Windowed log.

EDIT: I also attached a logfile using Fullscreen and systemRAM.

Toni Wilen · 22 August 2008, 21:08

Quote:

Originally Posted by DDNI

Hi Toni, I posted logs for both Fullscreen and Windowed. The exception doesnt seem to appear in the Windowed log.

Ok, it really is driver bug (Probably Vista specific driver bug only) Which driver version?

DDNI · 22 August 2008, 21:16

Hi Toni info from CCC

Driver Packaging Version 8.522-080731a-067980C-ATI
Catalyst® Version 08.8
Provider ATI Technologies Inc.
2D Driver Version 7.01.01.809
2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001
Direct3D Version 7.14.10.0603
OpenGL Version 6.14.10.7873
Catalyst® Control Center Version 2008.0731.2322.39992
AV Stream (T200) Driver Version 6.14.10.1089

Many thanks for looking at this.

Toni Wilen · 22 August 2008, 21:22

I thought this was released later than your original post

If you are not scared of betas, you can try these: http://www.rage3d.com/board/showthread.php?t=33929301 (they are newer than official 8.8 even if it says 8.7)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Streetfighter2 Turbo CD32 Screen Corruption	ScottC2010	support.WinUAE	3	14 March 2013 22:19
Some screen corruption with JIT enabled	Leffmann	support.WinUAE	14	07 February 2009 21:31
Apidya screen corruption	girv	support.WinUAE	13	27 March 2008 18:07
Graphics corruption	Minuous	support.WinUAE	9	21 July 2005 17:42
Graphics Corruption	DW7	support.WinUAE	3	09 November 2003 01:45

22 August 2008, 10:29	#3
DDNI Targ Explorer Join Date: Mar 2006 Location: Northern Ireland Posts: 5,431	Hi Toni, sorry for the lame report Windowed mode is fine. Changing "display buffer" does not fix the issue. Not a Laptop. It is a crossfire 2900xt system with latest drivers. Changing p96 mode in WB does not fix the issue. I am sure it is a I.D.10.T user error or Driver issue too... But still an real issue till I fix it... Many thanks.

22 August 2008, 17:58	#4
thomas Registered User Join Date: Jan 2002 Location: Germany Posts: 6,985	Try 16bit screenmode instead of 32bit or vice versa.

22 August 2008, 20:37	#5
DDNI Targ Explorer Join Date: Mar 2006 Location: Northern Ireland Posts: 5,431	Hi Thomas, I should have said. I have tried both 16 and 32 bit screenmodes. Many thanks.

22 August 2008, 20:40	#6
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,505	winuaebootlog.txt please (I forgot to ask..)

22 August 2008, 20:44	#8
DDNI Targ Explorer Join Date: Mar 2006 Location: Northern Ireland Posts: 5,431	Hi Toni, I dont get any exception window appearing in either windowed or fullscreen modes.

22 August 2008, 21:16	#12
DDNI Targ Explorer Join Date: Mar 2006 Location: Northern Ireland Posts: 5,431	Hi Toni info from CCC Driver Packaging Version 8.522-080731a-067980C-ATI Catalyst® Version 08.8 Provider ATI Technologies Inc. 2D Driver Version 7.01.01.809 2D Driver File Path /REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/Class/{4D36E968-E325-11CE-BFC1-08002BE10318}/0001 Direct3D Version 7.14.10.0603 OpenGL Version 6.14.10.7873 Catalyst® Control Center Version 2008.0731.2322.39992 AV Stream (T200) Driver Version 6.14.10.1089 Many thanks for looking at this.

22 August 2008, 21:22	#13
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 49 Posts: 26,505	I thought this was released later than your original post If you are not scared of betas, you can try these: http://www.rage3d.com/board/showthread.php?t=33929301 (they are newer than official 8.8 even if it says 8.7)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)