English Amiga Board


Go Back   English Amiga Board > Support > support.OtherUAE

 
 
Thread Tools
Old 17 December 2008, 10:37   #1
Gaula92
Registered User
Gaula92's Avatar
 
Join Date: Aug 2008
Location: Spain
Posts: 464
Configure USB joystic in e-uae (OSX & Linux)

I am trying to setup an usable emulation enviroment with e-uae on mac/linux, but (among other problems) my usb-attached ps2 joystick doesn't work properly: only one button is recognized, but directional pad is not.
I see the relevant part in uaerc is:

joyport0=mouse
joyport1=joy0
input.config=0
input.1.keyboard.0.button.17=JOY1_UP
input.1.keyboard.0.button.11=JOY1_DOWN
input.1.keyboard.0.button.3=JOY1_LEFT
input.1.keyboard.0.button.4=JOY1_RIGHT
input.1.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.1.keyboard.0.button.126=JOY2_UP
input.1.keyboard.0.button.125=JOY2_DOWN
input.1.keyboard.0.button.123=JOY2_LEFT
input.1.keyboard.0.button.124=JOY2_RIGHT
input.1.keyboard.0.button.59=JOY2_FIRE_BUTTON
input.2.keyboard.0.button.17=JOY1_UP
input.2.keyboard.0.button.11=JOY1_DOWN
input.2.keyboard.0.button.3=JOY1_LEFT
input.2.keyboard.0.button.4=JOY1_RIGHT
input.2.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.2.keyboard.0.button.126=JOY2_UP
input.2.keyboard.0.button.125=JOY2_DOWN
input.2.keyboard.0.button.123=JOY2_LEFT
input.2.keyboard.0.button.124=JOY2_RIGHT
input.2.keyboard.0.button.62=JOY2_FIRE_BUTTON
input.3.keyboard.0.button.17=JOY1_UP
input.3.keyboard.0.button.11=JOY1_DOWN
input.3.keyboard.0.button.3=JOY1_LEFT
input.3.keyboard.0.button.4=JOY1_RIGHT
input.3.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.3.keyboard.0.button.126=JOY2_UP
input.3.keyboard.0.button.125=JOY2_DOWN
input.3.keyboard.0.button.123=JOY2_LEFT
input.3.keyboard.0.button.124=JOY2_RIGHT
input.3.keyboard.0.button.62=JOY2_FIRE_BUTTON
input.4.keyboard.0.button.17=JOY1_UP
input.4.keyboard.0.button.11=JOY1_DOWN
input.4.keyboard.0.button.3=JOY1_LEFT
input.4.keyboard.0.button.4=JOY1_RIGHT
input.4.keyboard.0.button.58=JOY1_FIRE_BUTTON
input.4.keyboard.0.button.126=JOY2_UP
input.4.keyboard.0.button.125=JOY2_DOWN
input.4.keyboard.0.button.123=JOY2_LEFT
input.4.keyboard.0.button.124=JOY2_RIGHT
input.4.keyboard.0.button.62=JOY2_FIRE_BUTTON
sdl.map_raw_keys=false


So I was wondering how can I remap what JOY1_UP, JOY1_DOWN, JOY1_LEFT and JOY1_RIGHT is, so I can use this nice pad. HI-TORO totally lacks button configuration, and this input config is...strange, to say the least.
This pad works without problems with other emulators, souch as Magic Engine or Snes9X.

Any ideas?
Gaula92 is offline  
Old 18 December 2008, 15:03   #2
hit
Registered User
 
Join Date: Jun 2008
Location: planet earth
Posts: 1,115
not really a clue about these configs. but in the given example above, try changing: "input.config=0" into "input.config=1". the lines you have listed, seems for configuration 1-4 but not "0". well, i might be wrong here.
hit is offline  
Old 18 December 2008, 15:11   #3
TCD
Registered User

TCD's Avatar
 
Join Date: Sep 2006
Location: Germany
Age: 43
Posts: 24,024
You're right hit 'input.config=0' means that the compatibility mode is used. However I don't know which config lines you need to assign the directional pad and more firebuttons
TCD is offline  
Old 19 December 2008, 10:03   #4
Gaula92
Registered User
Gaula92's Avatar
 
Join Date: Aug 2008
Location: Spain
Posts: 464
leaving e-uae. It's just too far from perfection for what I expect for an Amiga emulator: no one cares to improve it's graphical output, control configs, etc...

back to winUAE.

Thanks for all your response, guys!
Gaula92 is offline  
Old 19 December 2008, 22:05   #5
hit
Registered User
 
Join Date: Jun 2008
Location: planet earth
Posts: 1,115
same here, the gui looks poorly and not that much options compared to winuae.
can you say something about the "'input.config=0'" issue? does the 0 -> 1 "trick" works?
hit is offline  
Old 22 September 2009, 21:11   #6
tbaac
 
Posts: n/a
Hi everyone, I'm new here

I've searched google and I've searched these forums. I am trying to set up a PS3 controller plugged into my laptop on e-UAE on linux.

So far the only thing that I have working is a fire button. Ideally I would like to choose which button to use as fire and to use the left analog stick, but figured that if necessary I might have to use the d-pad.

My question is, is there any documentation about the .uaerc configuration file, in particular related to joystick configuration?

Thank you
 
Old 09 February 2010, 19:51   #7
klx300r
Registered User
klx300r's Avatar
 
Join Date: Oct 2007
Location: Toronto, Canada
Age: 51
Posts: 1,002
I'm a noob when it comes to E-UAE in general and I'm trying to get my Logitech Dual Action gamepad working under E-UAE for OS4.1..anyone have it working?
Will gaula88's info work for the Amiga version of E-UAE
klx300r is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS-UAE and external usb soundcard on Linux Speedvicio support.FS-UAE 4 01 May 2012 14:25
USB Joystic button problems arnljot support.WinUAE 1 26 August 2007 13:11
What do you do when you configure a Logitech USB controller? Cardynal New to Emulation or Amiga scene 0 15 November 2006 19:01
experimental uae for linux ( & mac too?? ) mtb support.OtherUAE 57 15 September 2004 13:19
New user - OSX Panther & uae rich3174 New to Emulation or Amiga scene 4 05 March 2004 17:26

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 01:57.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Page generated in 0.06995 seconds with 13 queries