Hardfile Settings window problems

mark_k · 10 September 2016, 16:40

I noticed a couple of issues with the Hardfile Settings window.

If you edit the HDF filename manually (click in Path string box and change the filename), when you press return the window closes but the new name is ignored. If you click OK instead the new name is remembered.

The next issue happens when you click the ... button to open a file requester for choosing the HDF name (as opposed to typing it manually). When you choose the new HDF in the file requester, the HDF settings are reset to the defaults (SCSI-2, non-RDB mode, surfaces 1, sectors 32, reserved 2). If you then click RDB mode the manual geometry box is checked if it was before, but the geometry values are reset to the defaults (e.g. 4 surfaces, 63 sectors etc.).

That makes using multiple HDFs for e.g. Tecmar or Xebec controllers a bit of a pain, since you have to fix the geometry and RDB mode settings each time you change HDF. If you're using a config someone else made it's quite likely your HDF won't be in the exact same location so you'll need to change it before starting emulation. And when you do that the manual geometry gets messed up.

Toni Wilen · 17 September 2016, 20:58

Fixed (and some other similar comboboxes fixed too)

mark_k · 19 September 2016, 00:50

That change might have broken something else since I noticed this issue with latest winuae.exe but not 3.4.0b7.

In CD & Hard drives, click Add Directory or Archive...
Click Select Directory and choose a directory. (Similar problem if you click Select Archive or Plain File.)
Type something in the Device name and Volume label fields. Click OK.

In the list of drives what you just added shows as RDH0/Harddrive/-
Double-click that entry to see the Path field is blank and the device name and volume label fields have been changed to RDH0 and Harddrive.

But if you now click the drop-down arrow to the right of the Path box, you can select the directory you chose before. Then edit device name and label and click OK, this time it gets added correctly. (Edit to add: I just tried again and while the path showed correctly in the list, device name and label had reverted to RDH0 and Harddrive.)

10 September 2016, 16:40	#1
mark_k Registered User Join Date: Aug 2004 Location: Posts: 2,873	Hardfile Settings window problems I noticed a couple of issues with the Hardfile Settings window. If you edit the HDF filename manually (click in Path string box and change the filename), when you press return the window closes but the new name is ignored. If you click OK instead the new name is remembered. The next issue happens when you click the ... button to open a file requester for choosing the HDF name (as opposed to typing it manually). When you choose the new HDF in the file requester, the HDF settings are reset to the defaults (SCSI-2, non-RDB mode, surfaces 1, sectors 32, reserved 2). If you then click RDB mode the manual geometry box is checked if it was before, but the geometry values are reset to the defaults (e.g. 4 surfaces, 63 sectors etc.). That makes using multiple HDFs for e.g. Tecmar or Xebec controllers a bit of a pain, since you have to fix the geometry and RDB mode settings each time you change HDF. If you're using a config someone else made it's quite likely your HDF won't be in the exact same location so you'll need to change it before starting emulation. And when you do that the manual geometry gets messed up.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Hardfile transfer settings	teppic	support.WinUAE	2	30 January 2016 23:39
SCSI hard disk emulation and hardfile settings	mark_k	support.WinUAE	0	18 February 2013 19:11
Small issue with string gadgets in settings window	mark_k	support.WinUAE	0	07 March 2012 19:05
Hardfile problems	quicksylver	support.WinUAE	4	17 November 2003 22:53
Folder shortcuts? Recall window settings?	Mojo2000	New to Emulation or Amiga scene	5	29 January 2003 00:03

17 September 2016, 20:58	#2
Toni Wilen WinUAE developer Join Date: Aug 2001 Location: Hämeenlinna/Finland Age: 43 Posts: 20,913	Fixed (and some other similar comboboxes fixed too)

19 September 2016, 00:50	#3
mark_k Registered User Join Date: Aug 2004 Location: Posts: 2,873	That change might have broken something else since I noticed this issue with latest winuae.exe but not 3.4.0b7. In CD & Hard drives, click Add Directory or Archive... Click Select Directory and choose a directory. (Similar problem if you click Select Archive or Plain File.) Type something in the Device name and Volume label fields. Click OK. In the list of drives what you just added shows as RDH0/Harddrive/- Double-click that entry to see the Path field is blank and the device name and volume label fields have been changed to RDH0 and Harddrive. But if you now click the drop-down arrow to the right of the Path box, you can select the directory you chose before. Then edit device name and label and click OK, this time it gets added correctly. (Edit to add: I just tried again and while the path showed correctly in the list, device name and label had reverted to RDH0 and Harddrive.)

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

AdSense

AdSense