CWB3.9 red screen/guru/no boot

UberFreak · 02 July 2010, 18:37

Hi again

Decided to try out OS3.9 for the very first time today.
All work was done on WinUAE, so far I've done the following:

1) Create a 512MB HDF, formatted with FFS
2) Install OS3.9 (with genesis/aweb & warpos - set to "no ppc card available")
3) Install BB1+2

So far everything boots ok & works fine. Now:
4) Install CWB3.9

After the installation, I attempted to boot from CWB's System.hdf (still on WinUAE) but got a flashing red screen.
I noticed that different things happen depending on the HDF settings, for example:

- HD controller set to UAE - GURU (error 8000 0004 task 1001d568)
- HD controller set to UAE with "enable RDB mode" - no boot (KS3.1 screen)
- HD controller set to IDE0 - flashing red screen

My original OS3.9 HDF with BB1+2 boots fine.

Any ideas?

Thanks in advance!

Bloodwych · 16 July 2010, 15:57

No idea I'm afraid. The install routine isn't ideal I know, but it does work my side and a few others seem to have got it working.

Just make sure you have the OS3.9 (with BB1 & 2) install set as DH0: and the provided ClassicWB HDF set as DH1:, then boot and double click the install icon. It should work fine.

TheELF · 16 July 2010, 18:39

Since you did format the HD with FFS did you point UAE to a valid fastfilesystem file?
Under the path for your hdf where you select the path of the Filesys!

02 July 2010, 18:37	#1
UberFreak Registered User Join Date: Sep 2009 Location: the world Posts: 439	CWB3.9 red screen/guru/no boot Hi again Decided to try out OS3.9 for the very first time today. All work was done on WinUAE, so far I've done the following: 1) Create a 512MB HDF, formatted with FFS 2) Install OS3.9 (with genesis/aweb & warpos - set to "no ppc card available") 3) Install BB1+2 So far everything boots ok & works fine. Now: 4) Install CWB3.9 After the installation, I attempted to boot from CWB's System.hdf (still on WinUAE) but got a flashing red screen. I noticed that different things happen depending on the HDF settings, for example: - HD controller set to UAE - GURU (error 8000 0004 task 1001d568) - HD controller set to UAE with "enable RDB mode" - no boot (KS3.1 screen) - HD controller set to IDE0 - flashing red screen My original OS3.9 HDF with BB1+2 boots fine. Any ideas? Thanks in advance!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
micronik accelerator error red screen on boot up	rampartsagain	support.Hardware	9	07 July 2012 13:21
Amiga 600 not booting... Yellow screen, and Red screen when turning PSU off	jbenam	support.Hardware	34	20 March 2011 22:10
amiga 4000t guru boot	Landoq	support.Hardware	9	10 May 2010 08:47
a4000 red screen + more	thinlega	support.Hardware	13	28 April 2005 08:20
red screen?	someamigauser	support.Hardware	2	02 October 2002 07:37

16 July 2010, 15:57	#2
Bloodwych Moderator Join Date: Jun 2001 Location: I'm behind you! Posts: 3,763	No idea I'm afraid. The install routine isn't ideal I know, but it does work my side and a few others seem to have got it working. Just make sure you have the OS3.9 (with BB1 & 2) install set as DH0: and the provided ClassicWB HDF set as DH1:, then boot and double click the install icon. It should work fine.

16 July 2010, 18:39	#3
TheELF Registered User Join Date: Jun 2010 Location: salloniki Posts: 12	Since you did format the HD with FFS did you point UAE to a valid fastfilesystem file? Under the path for your hdf where you select the path of the Filesys!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)