Highway just stopped working...

Smiley · 02 September 2006, 19:51

I just went to plug my usb stick into my highway today and it didnt work.

It didnt come up as usual when plugged in and its led didnt turn on.

I checked my startup-sequence and the posiedon line is still there.

The highway is shown as working in the early boot menu.

I plugged in a usb hub which is externally powered, when the usb stick is plugged into that I at least get the green led but nothing on the Amiga.

Posiedon shows that no usb devices are attached.

I have tried clicking online in posiedon but nothing...

I dont understand why this has stopped working when it was fine the other day. Also all sys info programs and early boot menu say its configured working.

Any ideas?

Smiley · 02 September 2006, 20:20

Ok fixed by removing my scsi card and putting my highway in a different slot.

Are there any guidelines for how Z2 cards should be arranged?

Im using a Micronik 6860 rev5.43 busboard

EDIT: Now for some reason my Amiga wont boot with the oktagon scsi card installed into any zorro slot.

My current zorro card config is:

(Top of Micronik 6860 busboard)
------------- - Empty
------------- - Empty
------------- - Highway USB
------------- - GVP Spectrum
------------- - Empty

Smiley · 04 September 2006, 17:09

Uhm, anything regarding the placement of zorro cards? ^

alexh · 04 September 2006, 17:20

I noticed similar things with my A4000 and DKB3128 and Dataflyer 4000SX SCSI card

02 September 2006, 19:51	#1
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,350	Highway just stopped working... I just went to plug my usb stick into my highway today and it didnt work. It didnt come up as usual when plugged in and its led didnt turn on. I checked my startup-sequence and the posiedon line is still there. The highway is shown as working in the early boot menu. I plugged in a usb hub which is externally powered, when the usb stick is plugged into that I at least get the green led but nothing on the Amiga. Posiedon shows that no usb devices are attached. I have tried clicking online in posiedon but nothing... I dont understand why this has stopped working when it was fine the other day. Also all sys info programs and early boot menu say its configured working. Any ideas?

02 September 2006, 20:20	#2
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,350	Ok fixed by removing my scsi card and putting my highway in a different slot. Are there any guidelines for how Z2 cards should be arranged? Im using a Micronik 6860 rev5.43 busboard EDIT: Now for some reason my Amiga wont boot with the oktagon scsi card installed into any zorro slot. My current zorro card config is: (Top of Micronik 6860 busboard) ------------- - Empty ------------- - Empty ------------- - Highway USB ------------- - GVP Spectrum ------------- - Empty Last edited by Smiley; 02 September 2006 at 20:40.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2.5.1 has stopped working	sege	support.WinUAE	3	16 April 2013 11:40
cd32 stopped working, just like that !	kirk	support.Hardware	30	12 October 2009 13:13
CD32 stopped working	Twiggy	support.Hardware	14	15 June 2009 10:44
My A4000 has stopped working!!!	BinoX	support.Hardware	19	02 June 2007 23:19
A2091 Stopped working	Gary Harrison	support.Hardware	5	19 June 2004 20:30

04 September 2006, 17:09	#3
Smiley Amiga-less! Join Date: Feb 2005 Location: UK Posts: 1,350	Uhm, anything regarding the placement of zorro cards? ^

04 September 2006, 17:20	#4
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,357	I noticed similar things with my A4000 and DKB3128 and Dataflyer 4000SX SCSI card

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)