English Amiga Board


Go Back   English Amiga Board > Support > support.Hardware

 
 
Thread Tools
Old 23 February 2007, 12:44   #1
jimbo100
Registered User
jimbo100's Avatar
 
Join Date: Jul 2006
Location: Western Australia
Age: 52
Posts: 225
SCSI Quantum Fireball TM

I have obtained a couple of Quantum Fireball TM SCSI hard disks. They are marked as following;

2.0GB FBTMS 655-0435
Quantum Fireball TM 3.5 Series

One drive is 2100S TM21S03 Rev 03-B S300Z &
the other is 2100S TM21S03 Rev 04-B S300Z

Now I have plugged them into an Amiga A590 (rev 6.6) and Squirrel SCSI device and HDToolbox finds both devices without problems however when I go to read configurations it reads Manufacturers Name, Drive name and drive revision ok but comes up with a "Cannot read device size!"

I have tried with Kickstart 2.04 & 3.1, both have the same result.

I have searched the internet and can't find any info for cylinders, heads, blocks for tracks etc and any info I plug in always comes up with "Error 29 on write!"

What little info I can find is they are 2.1GB drives with a formatted capacity of 2168.8MB with 4,236,019 logical blocks, 4 physical heads and 2 physical disks.

Does anyone have any experience with these drives. Just want to be able to format and use with my Amiga's!
jimbo100 is offline  
Old 28 February 2007, 14:36   #2
Carcenomy
Registered User
Carcenomy's Avatar
 
Join Date: Nov 2006
Location: Invercargill, New Zealand
Age: 35
Posts: 20
Send a message via ICQ to Carcenomy Send a message via MSN to Carcenomy
Ewww, Fireballs... I've had a few Fireballs (never on an Amiga though ) and they tend to be just as the name suggests - good for a while then spontaneously fly apart...
Carcenomy is offline  
Old 28 February 2007, 15:44   #3
Zetr0
Ya' like it Retr0?
Zetr0's Avatar
 
Join Date: Jul 2005
Location: United Kingdom
Age: 45
Posts: 9,768
An Amiga + old scsi RLL CHS controller and has a lot of issues with certain
types of Hard disk ide/scsi even if they are CHS compatible!

so here is a little on drive geometry

there are two co-existing types of hard disk geometry the manufactures method of Physcial and the computational of Logical.

You need to convert your PHYSICAL geomertry into a logica geometry (like the one below)

size is calticulated by:- (correct me if i am wrong here)

size = cyl * hds * sect * blks

heres a little more info on calculation and how to translate between physical and logical geometry

http://www.pcguide.com/ref/hdd/geom/geomLogical-c.html

and some more here

http://www.storagereview.com/guide20...omLogical.html

heres a logical geometry for your quantum

http://www.computerhope.com/hdquantu.htm#fireball

Code:
Fireball 2.1GB
size	2.1GB

cyl	4029

Hds	16

Sect	63

blks        512

doing the size calculation on it:

size (2,079,350,784) = cyl * hds * sect * blks
----------------------------------

Another method that one could employ is to remove the hdd and lump it into the PC and use WinUAE to set it up. of course in this case you would need to have a scsi host (card /device) installed on your PC.


anyways I hope this helps...
Zetr0 is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help ME Quantum Viking II 9100MB powerg5 support.Hardware 2 13 May 2009 04:38
Wanted: Quantum LP52S (52MB) Harddisk NoX1911 MarketPlace 0 04 October 2008 01:51
Wanted QUANTUM FIREBALL SCSI Hard Drive for Amiga 2000 Stormrider MarketPlace 2 05 January 2006 05:32
Quantum GO Drive Mick_AKA support.Hardware 1 14 July 2002 23:50
Replacing 2000HD's Quantum HD & SCSI controller mfratus support.Hardware 8 24 May 2002 06:53

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 18:03.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Page generated in 0.08073 seconds with 13 queries