18 February 2020, 23:07 | #1 |
Registered User
Join Date: Dec 2018
Location: London
Posts: 41
|
Help! Benq BL702A - LCD 15KHz
On Ebay the above is described as Ultimate LCD for Amiga
I downloaded manual and its connection is Video Cable: D-Sub Does any body know if a) good for games b) What amiga lead would work as i have not seen an Amiga D Sub Only know Modulator / RGB/ Composite/scart Any help would be very much appreciated... |
18 February 2020, 23:21 | #2 | |
Registered User
Join Date: Apr 2015
Location: Norway
Age: 47
Posts: 893
|
Quote:
https://www.ebay.com/sch/i.html?_fro...apter&_sacat=0 This plugs into the RGB port. Then you plug the VGA cable between monitor and this adapter. Remember to finetune pixel clock on the BL 702A. Usually it will be somewhere between 88 to 94. You will see it when the Amiga picture looks good. You may have to tune the phase clock a bit aswell. Find those in the menu of the BL 702A Or you could buy a cable that is VGA in monitor end and RGB in Amiga end https://www.ebay.com/itm/Amiga-LCD-M...QAAOSw4vpeSYDl |
|
18 February 2020, 23:25 | #3 |
Registered User
Join Date: Apr 2015
Location: Spain
Posts: 512
|
I use this one with Amplifier:
https://www.arananet.net/pedidos/pro...rgb-amplifier/ |
18 February 2020, 23:51 | #4 |
Registered User
Join Date: Dec 2018
Location: London
Posts: 41
|
Thank you very much very helpful
|
29 March 2020, 15:29 | #5 |
Registered User
Join Date: Mar 2020
Location: London
Posts: 3
|
Does it matter if the vga adapter is buffered or unbuffered? I got a buffered one from amigastore.eu and it does not work with 2 A1200s I tested. The monitor works fine when fed through a Scanplus AGA scandoubler so I am wondering if I got the wrong type of adapter or if it is a faulty one.
|
29 March 2020, 15:42 | #6 |
Targ Explorer
|
Which LCD screen are you using? Not all will sync to 15KHz. The VGA adapters are simple passthrough adapters and as such do not convert the Amiga signal to one usable by most VGA screens.
|
29 March 2020, 21:10 | #7 |
Registered User
Join Date: Mar 2020
Location: London
Posts: 3
|
Benq BL702A
|
30 March 2020, 20:24 | #8 |
Registered User
Join Date: Sep 2019
Location: Netherlands
Posts: 107
|
I have this exact screen with both the original CBM adapter (390682-01) as well as the one from Amigakit and they both work fine. Does all the native resolutions although I miss the controls for best alignment left/right it's way better than the alternatives.
|
30 March 2020, 20:26 | #9 |
Registered User
Join Date: Dec 2014
Location: Netherlands
Posts: 1,406
|
A lot about this monitor and its bigger brother can be found here: http://eab.abime.net/showthread.php?t=80217
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Amiga and BENQ BL912 / BL702A Monitors | Nostromo | support.Hardware | 161 | 08 December 2023 22:41 |
Brand new BenQ BL912 does not remember settings! | ProdigalAmigan | support.Hardware | 5 | 10 April 2019 23:45 |
LCD screen that does 15khz! | Amiga1992 | support.Hardware | 43 | 03 May 2017 09:51 |
BenQ 702A monitors on the way | turrican9 | support.Hardware | 0 | 09 January 2016 14:16 |
Benq 2420hd works with Amiga without a scandoubler! | Faerytale | support.Hardware | 21 | 05 November 2009 02:43 |
|
|