Cfide68k A500+ - Page 2

craggus2000 · 01 December 2010, 11:47

Quote:

Originally Posted by Boo Boo

Is there any chance of Skick .PAT & .RTB files for Patched 1.3 Kick
Also in time .PAT & .RTB files for AROS Kickstart

???

Retro1234 · 01 December 2010, 11:49

Quote:

Originally Posted by craggus2000

???

Sorry Going off topic I was asking anyone if it would be possible to use Skick in the future to load the Patched kickstart into Ram - This would mean you dont need the physical ROM

Also would be good for testing

Jope · 01 December 2010, 12:19

Quote:

Originally Posted by craggus2000

Having made my KS 1.3 with IDE rom file, how can I test to ensure the ide part will work before I get an EPRom programmed? Are there specific settings in winuae I should use?
Thanks

A600 quickstart but change the ROM to your 1.3 ROM.

Add your hard drive as IDE0.

craggus2000 · 01 December 2010, 12:52

Quote:

Originally Posted by Jope

A600 quickstart but change the ROM to your 1.3 ROM.

Add your hard drive as IDE0.

OK, so connecting the harddisk/cf and setting it as IDE0 as opposed to UAE... will ensure it uses the scsi.device in the rom file as opposed to winUAE booting bits?

cosmicfrog · 01 December 2010, 15:21

short answer

Yes

craggus2000 · 03 December 2010, 10:45

Quote:

Originally Posted by craggus2000

OK, so connecting the harddisk/cf and setting it as IDE0 as opposed to UAE... will ensure it uses the scsi.device in the rom file as opposed to winUAE booting bits?

Setting the CD to IDE0 instead of UAE stops it from booting! And if I boot from a WB install disk - with and without changing SCSI_DEVICE_NAME from scsi.device to uaehf.device, it still doesn't see the CF card!

Any ideas?

Thanks

Jope · 03 December 2010, 12:31

IDE0 = scsi.device
UAE = uaehf.device

Double check in the adv chipset settings whether A600/A1200 IDE is selected.

Gaula92 · 06 December 2010, 13:11

Is there anywhere I can get a modified 1.3 with HD support?
It's specially usefull for Minimig, because in this machine KS is loaded into RAM... and it has only 2MB wich become 1.5MB after loading KS3.1/3.0/20.05
The extra small 256KB would be usefull

thanks

Cammy · 06 December 2010, 21:28

http://www.amigamaniac.com has EPROMs and Kickstart Switchers among other useful hardware you can use on your Amiga.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
A1200, A600, A500+ and A500	maddoc666	MarketPlace	1	22 May 2011 09:11
For Sale: 2mb RAM Expansion for A500/A500+	PowerPie5000	MarketPlace	1	22 November 2010 01:10
Woul A500 plus ram expansion work on A500?	JACK98	support.Hardware	1	04 May 2010 01:15
How to dismantle an old A500 and rebuild a NOS A500	Specksynder	Hardware pics	8	17 February 2010 00:06
Upgrading an A500 to an A500+ tech questions	Merlin	support.Hardware	28	02 May 2007 00:49

01 December 2010, 15:21	#25
cosmicfrog The 1 who ribbits Join Date: Apr 2006 Location: leek, Staffs, UK Age: 56 Posts: 3,557	short answer Yes

03 December 2010, 12:31	#27
Jope - Join Date: Jul 2003 Location: Helsinki / Finland Age: 43 Posts: 9,861	IDE0 = scsi.device UAE = uaehf.device Double check in the adv chipset settings whether A600/A1200 IDE is selected.

06 December 2010, 13:11	#28
Gaula92 Registered User Join Date: Aug 2008 Location: Spain Posts: 527	Is there anywhere I can get a modified 1.3 with HD support? It's specially usefull for Minimig, because in this machine KS is loaded into RAM... and it has only 2MB wich become 1.5MB after loading KS3.1/3.0/20.05 The extra small 256KB would be usefull thanks

06 December 2010, 21:28	#29
Cammy Registered User Join Date: Aug 2007 Location: Tasmania, Australia Age: 39 Posts: 1,189	http://www.amigamaniac.com has EPROMs and Kickstart Switchers among other useful hardware you can use on your Amiga.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)