Multiboot ClassicWB/3.1 and ClassicWB/OS3.9

MrGimper · 16 September 2010, 19:25

Couldn't see a general software forum so I took the plung and posted here....

I have created a ClassicWB ADVSP of 3.1 on WinUAE
I have also created a ClassicWB OS3.9

Both boot on their own no problem in winUAE (seperate harddisks).. the 3.1 boots scalos, and the 3.9 boots workbench

I'm ultimately trying to get 2 partitions down onto my real amiga HD and be able to boot between the 2 using the boot menu (both mouse buttons)

I created 2 partitions on my real disk, labelled DH0 and DH1. Using winuae, i copied the contents of my ClassicWB 3.1 onto DH0, and the contents of ClassicWB39 onto DH1:

DH0 has a higher boot priority than DH1

Boot real miggy, ClassicWB 3.1 starts with Scalos from DH0. However the disk icon for DH1 is a grey square with a black square in it (as are all the contents of this drive), and there are duplicates for Run, Drawers and CXHandler on the screen, all with the same grey square/black square icon.

So that's problem 1 ... why is this.

OK... so then I reboot, hold mouse buttons, select boot off DH1. System boots however I get EXACTLY the same! This is supposed to be ClassicWB39... where'd scalos come from?

Help! LOL

fitzsteve · 16 September 2010, 19:30

I found the same running two CWB's on two partitions, all I can suggest is at the early startup disable one of the partitions that you are not using.

MrGimper · 16 September 2010, 19:31

I've just worked out what it is ... I think!

OS3.9 has BoingBag 2 installed with the ROM patch! So when I select DH1 from the boot menu, it boots DH1, applies the patch and reboots .... this time loading DH0!!

Jesus ... any way I can stop this happening?

zipper · 16 September 2010, 19:35

At least you can boot twice from early startup - that's what I have to do with 3.9 + 4.0 partitions.

MrGimper · 16 September 2010, 19:42

Quote:

Originally Posted by zipper

At least you can boot twice from early startup - that's what I have to do with 3.9 + 4.0 partitions.

Good point ... however do I NEED the ROM update on 3.9 BB2 ?

16 September 2010, 19:25	#1
MrGimper Registered User Join Date: Sep 2010 Location: Basingstoke / UK Posts: 72	Multiboot ClassicWB/3.1 and ClassicWB/OS3.9 Couldn't see a general software forum so I took the plung and posted here.... I have created a ClassicWB ADVSP of 3.1 on WinUAE I have also created a ClassicWB OS3.9 Both boot on their own no problem in winUAE (seperate harddisks).. the 3.1 boots scalos, and the 3.9 boots workbench I'm ultimately trying to get 2 partitions down onto my real amiga HD and be able to boot between the 2 using the boot menu (both mouse buttons) I created 2 partitions on my real disk, labelled DH0 and DH1. Using winuae, i copied the contents of my ClassicWB 3.1 onto DH0, and the contents of ClassicWB39 onto DH1: DH0 has a higher boot priority than DH1 Boot real miggy, ClassicWB 3.1 starts with Scalos from DH0. However the disk icon for DH1 is a grey square with a black square in it (as are all the contents of this drive), and there are duplicates for Run, Drawers and CXHandler on the screen, all with the same grey square/black square icon. So that's problem 1 ... why is this. OK... so then I reboot, hold mouse buttons, select boot off DH1. System boots however I get EXACTLY the same! This is supposed to be ClassicWB39... where'd scalos come from? Help! LOL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ClassicWB OS3.9 in emulator	elowan	project.ClassicWB	3	16 January 2013 14:54
ClassicWB OS3.9/BB 3+4?	esc	project.ClassicWB	4	19 September 2011 12:00
ClassicWB OS3.5/3.9 question	MethodGit	project.ClassicWB	3	01 October 2010 11:00
ClassicWB OS3.9 - LargeHD Folder missing?	mfletcher	project.ClassicWB	1	18 May 2010 08:41
ClassicWB OS3.9 2.5	merlinkv	project.ClassicWB	9	05 May 2010 12:33

16 September 2010, 19:30	#2
fitzsteve Professional slacker! Join Date: Jul 2009 Location: Kent, UK Age: 44 Posts: 6,683	I found the same running two CWB's on two partitions, all I can suggest is at the early startup disable one of the partitions that you are not using.

16 September 2010, 19:31	#3
MrGimper Registered User Join Date: Sep 2010 Location: Basingstoke / UK Posts: 72	I've just worked out what it is ... I think! OS3.9 has BoingBag 2 installed with the ROM patch! So when I select DH1 from the boot menu, it boots DH1, applies the patch and reboots .... this time loading DH0!! Jesus ... any way I can stop this happening?

16 September 2010, 19:35	#4
zipper Registered User Join Date: Mar 2004 Location: finland Posts: 1,837	At least you can boot twice from early startup - that's what I have to do with 3.9 + 4.0 partitions.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)