Anyone succeed in running WipeOut 2097 ???

Foul · 30 September 2014, 13:07

I'm playing with PPC Setup and trying to run WipeOut 2097...

Juste got the Configuration Windows but can't change anything on it and can't change Screenmode...

Maybe does it require BvisionPPC/Permedia2 Gfx card ???

Is there a way to run it under Picasso96 ?

amigafreak68k · 30 September 2014, 15:09

It require Warp3D I think. Could this be used with Picasso IV since release of version 4 in 2002?

Quote:

This is release 4 of Warp3D, the driver system for 3D hardware on the
Amiga.

Currently, Warp3D supports the following graphics cards:
- CyberVision PPC (Permedia2 based)
- BlizzardVision PPC (Permedia2 based)
- CyberVision 3D (Virge based)
- Voodoo 3 (G-Rex and Prometheus)

Note: This archive does not contain Mediator-enabled drivers. These
are only available at Elbox's website (www.elbox.com)

Warp3D requires 3D hardware to be present. It will not run with
2D-only graphics cards, or AGA/ECS/OCS.

http://aminet.net/package/driver/video/Warp3D-4.2a

Foul · 30 September 2014, 15:47

Warp3D is installed

Now i got Crash on Ramlib_PPC...

alexh · 30 September 2014, 16:34

AFAIK, WinUAE (and thus FS-UAE) doesn't support a gfx card capable of hardware 3D acceleration which is required for Warp3D.

I was wrong. See Below.

Foul · 30 September 2014, 16:38

ok, I have to motivate Toni/Frode now

turrican3 · 30 September 2014, 16:43

Quote:

Originally Posted by foul

ok, i have to motivate toni/frode now :d

+1

alexh · 30 September 2014, 16:53

It looks like I was wrong and you can use this :

http://thellier.free.fr/Wazp3D.htm

or this :

http://aminet.net/package/driver/video/QuarkTex

Foul · 30 September 2014, 16:54

Will test after work .. thx

Romanujan · 30 September 2014, 19:16

Does anyone know how to install the Wazp3D host-side library on FS-UAE (preferrably on x86-64 Linux)? I can't see any makefile in the archive and the build.sh seems to compile just the guest side...

Foul · 30 September 2014, 19:47

neither Wazp3D or Quartex seems to work under Linux

alexh · 30 September 2014, 19:47

The source for the host side of both are available.

The Windows host-side of Wazp3D is soft3d.dll for which the source code and the Visual C project file is in the Wazp3D-src directory.
The Windows host-side of QuarkTex is the "alib" file the source is on the GitHub repository.

Neither look like it is platform independent at the moment.

Write to the authors?

Mad-Matt · 30 September 2014, 21:37

It requires Warp3DPPC so replacing Warp3d.lib (68K) wont do a thing for the game.

Michael Sykes · 30 September 2014, 23:33

you can try this instead of quaktex/wazp3d......
http://aminet.net/package/driver/video/Warp3D_CPU_PPC

thellier · 01 October 2014, 10:09

>PPC Setup and trying to run WipeOut 2097...
Wazp3D 68k will not works nor Quarktex as it need the "68k to native x86 interface" that is broken in current WinUAE
Same applys for other UAEs (linux,etc..) : they dont (I think) have the "native interface" so soft3D.dll will never works

Wazp3D.library-ppc works but only in "renderer: soft ppc to bitmap" mode
see:
http://thellier.free.fr/winuaeppc.jpg
>It requires Warp3DPPC
Yes you also need a real Warp3DPPC.library from a (say) Sam440

Then perhaps (????) it will (sloooowwwwly) works
(WipeOut works this way with Wazp3D on Sam440)

Alain Thellier - Wazp3D

Foul · 01 October 2014, 10:39

thank you

FrodeSolheim · 01 October 2014, 11:04

Quote:

Originally Posted by thellier

Same applys for other UAEs (linux,etc..) : they dont (I think) have the "native interface" so soft3D.dll will never works

No, not without reworking it slightly and recompiling. But I did finish the new uaenative.library (http://eab.abime.net/showthread.php?...6&postcount=44) and it is available in both WinUAE and FS-UAE for all platforms. Here's some example code: https://github.com/FrodeSolheim/uni-sdk (Note: uaenative.interface is an "m68k library")

The new uaenative.library hasn't really had any real-world testing yet, and as far as I know isn't really used yet except by example code. But I'll be happy to assist with better documentation and help if you want to port to the new native interface

Patrickx1989 · 22 March 2021, 12:49

I am trying around for days getting this to run, but so far I haven't even managed to get PPC emulation to work right. Someone made a video on Youtube showing Wipeout run in an emulator, so it's obviously possible. Would anyone who got it to work here be willing to maybe share his config file and or installation with me - and maybe tell me step by step what I need to set up (in regard to Workbench version, 3D etc)?

30 September 2014, 13:07	#1
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	Anyone succeed in running WipeOut 2097 ??? I'm playing with PPC Setup and trying to run WipeOut 2097... Juste got the Configuration Windows but can't change anything on it and can't change Screenmode... Maybe does it require BvisionPPC/Permedia2 Gfx card ??? Is there a way to run it under Picasso96 ?

30 September 2014, 16:34	#4
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,337	AFAIK, WinUAE (and thus FS-UAE) doesn't support a gfx card capable of hardware 3D acceleration which is required for Warp3D. I was wrong. See Below. Last edited by alexh; 30 September 2014 at 16:58.

30 September 2014, 19:47	#11
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,337	The source for the host side of both are available. The Windows host-side of Wazp3D is soft3d.dll for which the source code and the Visual C project file is in the Wazp3D-src directory. The Windows host-side of QuarkTex is the "alib" file the source is on the GitHub repository. Neither look like it is platform independent at the moment. Write to the authors? Last edited by alexh; 30 September 2014 at 19:53.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WipeOut 2097	CountRaven	support.Games	7	13 January 2013 15:51
Wipeout 2097	Dreamcast270mhz	request.Old Rare Games	8	12 January 2013 20:09
Amiga WipeOut 2097 and Quake II Available	amigakit.com	MarketPlace	18	21 April 2009 14:32
WipeOut XL (2097)	Frog	Retrogaming General Discussion	29	01 December 2007 16:08
Wipeout 2097	^^Snoop^^	request.Old Rare Games	6	03 December 2002 05:00

30 September 2014, 15:47	#3
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	Warp3D is installed Now i got Crash on Ramlib_PPC...

30 September 2014, 16:38	#5
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	ok, I have to motivate Toni/Frode now

30 September 2014, 16:53	#7
alexh Thalion Webshrine Join Date: Jan 2004 Location: Oxford Posts: 14,337	It looks like I was wrong and you can use this : http://thellier.free.fr/Wazp3D.htm or this : http://aminet.net/package/driver/video/QuarkTex

30 September 2014, 16:54	#8
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	Will test after work .. thx

30 September 2014, 19:16	#9
Romanujan Registered User Join Date: Dec 2007 Location: Szczecin/Poland Posts: 424	Does anyone know how to install the Wazp3D host-side library on FS-UAE (preferrably on x86-64 Linux)? I can't see any makefile in the archive and the build.sh seems to compile just the guest side...

30 September 2014, 21:37	#12
Mad-Matt Longplayer Join Date: Jan 2005 Location: Lincoln / UK Age: 44 Posts: 1,846	It requires Warp3DPPC so replacing Warp3d.lib (68K) wont do a thing for the game.

30 September 2014, 23:33	#13
Michael Sykes WinUAE end user Join Date: Jan 2014 Location: Bremen Age: 44 Posts: 649	you can try this instead of quaktex/wazp3d...... http://aminet.net/package/driver/video/Warp3D_CPU_PPC

01 October 2014, 10:09	#14
thellier Registered User Join Date: Sep 2011 Location: Paris/France Posts: 274	>PPC Setup and trying to run WipeOut 2097... Wazp3D 68k will not works nor Quarktex as it need the "68k to native x86 interface" that is broken in current WinUAE Same applys for other UAEs (linux,etc..) : they dont (I think) have the "native interface" so soft3D.dll will never works Wazp3D.library-ppc works but only in "renderer: soft ppc to bitmap" mode see: http://thellier.free.fr/winuaeppc.jpg >It requires Warp3DPPC Yes you also need a real Warp3DPPC.library from a (say) Sam440 Then perhaps (????) it will (sloooowwwwly) works (WipeOut works this way with Wazp3D on Sam440) Alain Thellier - Wazp3D

01 October 2014, 10:39	#15
Foul Registered User Join Date: Jun 2009 Location: Perigueux/France Age: 49 Posts: 1,516	thank you

22 March 2021, 12:49	#17
Patrickx1989 Registered User Join Date: Mar 2021 Location: Austria Posts: 50	I am trying around for days getting this to run, but so far I haven't even managed to get PPC emulation to work right. Someone made a video on Youtube showing Wipeout run in an emulator, so it's obviously possible. Would anyone who got it to work here be willing to maybe share his config file and or installation with me - and maybe tell me step by step what I need to set up (in regard to Workbench version, 3D etc)?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)