CCCP by Juliet & Case on '060

Anybody managed to get this nice piece of art run on '060?

I tried 'cpu nocache', then run with killaga, no luck
It's long since I forced demos run on '060 platform ... VBR is causing
most trouble if i remember right.

Also booting without Bliz left me with just 1.75MB ram, which ain't enuff to
start Titanics packed original exe. 256kB of CHIP is lost somewhere ... nothing is in PCMCIA slot, only drive is 2GB CF card with 1 partition, which buffers are set to 20 from HDToolBox.

[britelite]

When running without the accelerator, did you also try running with no-startupsequence + setpatch? That should leave more ram available

Yes, coldboot (power on) and free memory checked with 'avail'.
Accelerator is Blizzard 1260, disabled from kbd. Idefix express is only hardware and CF card directly in it.

[Leffmann]

Demo needs 1.5M chip and another 1.5M of any type to run.

EDIT: actually I can run it with 1M chip and 2M fast if I close both the CLI and the Workbench screen before. Not that it makes any difference.

Does this count even if original Titanics-crunched was unpacked beforehand?
In that case, I gotto have a little play with TUDE, see if it's runnable at all.

My A1200 was getting dust in shelves for years. Now I have set it up and running and even revived my old demo collection.
I don't wanna show amy demos to my friends from youtube if I have real thing next =)

Originally Posted by Leffmann

Demo needs 1.5M chip and another 1.5M of any type to run.

EDIT: actually I can run it with 1M chip and 2M fast if I close both the CLI and the Workbench screen before. Not that it makes any difference.

[Leffmann]

Originally Posted by Brm

Does this count even if original Titanics-crunched was unpacked beforehand?
In that case, I gotto have a little play with TUDE, see if it's runnable at all.

I don't think it will make a difference in this case. Titanics only has a few kilobytes overhead because it loads and unpacks the file progressively.

I got CCCP running on '060 by starting it like this:

TUDE VBASE=ZERO
killaga CCCP.EXE

Actually, now I recall this is method that works for most older demos.
Strange tho, it won't run without 'killaga'. I thought this was supposed to be aga demo.
What I have learned of 'killaga', it is usually safe to run even on AGA demos. Somehow AGA demos will still work.


I gave up trying to find out where my 256k'ish of chipmem disappears on turboless no s-s boot. This could be SFS related problem, but I remember from past that this was issue I could never solve. Harddrives/CF cards take up some memory anyway on boot.
Perhaps this would be good time to start working with custom KS. I read all the forums regarding subject.
One question raises in my head, I wonder if there's tool that would tell what tasks use/reserve this ocuupied memory space? Just XOpa?