English Amiga Board


Go Back   English Amiga Board > Support > support.WinUAE

 
 
Thread Tools
Old 24 August 2018, 16:35   #361
AMIGASYSTEM
Registered User
AMIGASYSTEM's Avatar
 
Join Date: Aug 2014
Location: Brindisi (Italy)
Posts: 4,874
Quote:
Originally Posted by Toni Wilen View Post
I found some forum post that mentions there is no XTIDE compatible ATAPI driver. Normal drivers apparently won't work.
OK thanks Toni
AMIGASYSTEM is offline  
Old 24 August 2018, 17:09   #362
Zilog
Registered User

 
Join Date: May 2014
Location: Italy
Posts: 235
Quote:
Originally Posted by Toni Wilen View Post
Better reply: if there is PC SCSI controller + boot BIOS that uses already emulated SCSI chips (WD33C93 or NCR5380, 94, 400 or 710+, FAS408) and is ISA based.

And it must support SCSI CDROMs too. (better option than trying to add some extra IDE hack)

EDIT: PCem has some 53C400 based SCSI controller supported (53C400 is emulated in WinUAE) so this is one choice if it is sane enough SCSI controller and BIOS ROM is vailable.
Hy Tony,
scusme if don't aswer before, but not all day i can read the forum.

_A) I Confirm have the bios Bootable (Test with pcem)

_B) I Confirm that it isa Adaptec AHA-1542C

_C) I Confirm the support Cdrom (i Test in pcem)

In The zone have upload at:
_A) Bios
_B) Datasheet
_C) Dos Driver
_D) Aspi Driver for Windows 9.x (With 95 i have tested with Win 98 No)

Memory Possible Conf:
_Adress: 130 - 134 - 230 - 234 - 330 - 334

_Bios Andress: C8000 - CC000 -D0000 - D4000 -D8000 - DC000



Conf CdRom for Dos and Windows 3.11

_Into config.sys add:
__DEVICE=C:\DOSDRIVER\ASPI4DOS.SYS /D
__DEVICE=C:\DOSDRIVER\ASPICD.SYS /D:CDROM0


_Into autoexec.bat add:
__C:\DOS\MSCDEX.EXE /D:CDROM0



....i ready for all test.

Last edited by Zilog; 24 August 2018 at 17:22.
Zilog is offline  
Old 24 August 2018, 17:17   #363
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 44
Posts: 22,844
I did say that it must have UAE supported SCSI chip. None of Adaptec chips count. I won't debug some alien SCSI emulation using PC software!
Toni Wilen is offline  
Old 24 August 2018, 17:24   #364
Zilog
Registered User

 
Join Date: May 2014
Location: Italy
Posts: 235
Quote:
Originally Posted by Toni Wilen View Post
I did say that it must have UAE supported SCSI chip. None of Adaptec chips count. I won't debug some alien SCSI emulation using PC software!
....is only controller SCSI emulate in Pcem.
I Think that copy and paste code from pcem to winuae.

But if not possible. Ok....i Try
Zilog is offline  
Old 24 August 2018, 17:34   #365
LanceT
Registered User

LanceT's Avatar
 
Join Date: Jan 2018
Location: NC /USA
Posts: 16
Still following this
HWIFO shows as ATAPI device.

tried MTMCDS.SYS
Error I get is "CDR101: Not ready reading drive."

Will keep trying different drivers.

LanceT is offline  
Old 24 August 2018, 17:50   #366
LanceT
Registered User

LanceT's Avatar
 
Join Date: Jan 2018
Location: NC /USA
Posts: 16
Silly me don't know why I didn't click next screen LOL
LanceT is offline  
Old 24 August 2018, 20:08   #367
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 44
Posts: 22,844
Next step is to enable scsi logging (ATAPI uses SCSI commands): run winuae with -log -scsiemulog -scsilog command line parameters. If driver expects something unexpected or some rarely used SCSI command needs to be implemented. PC is totally different world than Amiga after all
Toni Wilen is offline  
Old 25 August 2018, 03:51   #368
LanceT
Registered User

LanceT's Avatar
 
Join Date: Jan 2018
Location: NC /USA
Posts: 16
Using the IDE:0 (auto) as above I did manage to get to boot a cd-driver from a dos disk (x86 side) and then was able to read the directory contents of a Win98 ISO disk. After that I tried to use the same driver to boot from my HD file, that was a no-go can't even get x86 or workbench to see the iso now. Will try again in the morning.
The driver is "sjcdapi.sys" sanyo v1.33 atapi may have been a one off or triggered by trying other drivers first.
LanceT is offline  
Old 25 August 2018, 06:31   #369
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 561
Toni, if you you are looking for a BIOS which PCem supports, pls tell me.

P.S. Thanks for the fix (chdman)

Last edited by AnnaWu; 25 August 2018 at 06:53.
AnnaWu is offline  
Old 25 August 2018, 10:25   #370
Zilog
Registered User

 
Join Date: May 2014
Location: Italy
Posts: 235
Quote:
Originally Posted by LanceT View Post
.......
I LanceT,
i have found a driver; ATAPICD.SYS
With this driver funtion correcty on dos, on windows 3.11;
Windows 9x don't have need of driver and funtion correcty.

XT Primary - With Master HDD and Slave CD-Rom

For Dos and Windows 3.11
Add into Config.sys
DEVICE=C:\DRIVER\ATAPICD.SYS /D:CDROM

Add into Autoexec.bat
C:\DOS\MSCDEX.EXE /D:CDROM

In TheZone i have upload a driver atapicd.sys

Good Looky!
Zilog is offline  
Old 25 August 2018, 13:09   #371
LanceT
Registered User

LanceT's Avatar
 
Join Date: Jan 2018
Location: NC /USA
Posts: 16
Quote:
Originally Posted by Zilog View Post
In TheZone i have upload a driver atapicd.sys
Thank you Zilog, That worked great.

Now to get out my old rusty PC. CD's
LanceT is offline  
Old 25 August 2018, 19:45   #372
Zilog
Registered User

 
Join Date: May 2014
Location: Italy
Posts: 235
Hy Tony,
i try tu use under Window95 a Cd-Audio and winaue crash.

In Atacch Files.

Last edited by Zilog; 25 August 2018 at 20:02.
Zilog is offline  
Old 25 August 2018, 20:51   #373
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 44
Posts: 22,844
Quote:
Originally Posted by Zilog View Post
Hy Tony,
i try tu use under Window95 a Cd-Audio and winaue crash.

In Atacch Files.
I don't see anything bridgeboard specific -> test and confirm if it happens in plain AmigaOS.

EDIT: also include winuaelog.txt from bridgeboard crash using following command line parameters: -log -scsiemulog -scsilog -logflush

Last edited by Toni Wilen; 25 August 2018 at 21:09.
Toni Wilen is offline  
Old 26 August 2018, 05:33   #374
Kalamatee
Registered User

 
Join Date: May 2017
Location: Scotland
Posts: 47
Hi Toni - can you clarify for me if the new bridgeboard code supports anything better than a 386 .. or can it also simulate the modified A2386SX boards as discussed in http://aminet.net/package/misc/emu/BBCpuUpgrde1.0 ?
Kalamatee is offline  
Old 26 August 2018, 08:18   #375
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 561
Audio CD on WfW is working well.
Peter Gabriel Karaoke (CD+G*) image. *Can play Audio data only because this is not a (Karaoke)player to present graphics.
Attached Thumbnails
Click image for larger version

Name:	PG.png
Views:	62
Size:	200.4 KB
ID:	59516  

Last edited by AnnaWu; 26 August 2018 at 08:59.
AnnaWu is offline  
Old 26 August 2018, 09:23   #376
AMIGASYSTEM
Registered User
AMIGASYSTEM's Avatar
 
Join Date: Aug 2014
Location: Brindisi (Italy)
Posts: 4,874
What does it mean "WfW", someone can tell me why HardFile "VGA IDE Primary HDD Boot WfW" they work well with "AT IDE Primary (86)" while i HardFile "XTIDE Universal BIOS HD" they are not support system boot "AT IDE Primary (86)"?
AMIGASYSTEM is offline  
Old 26 August 2018, 09:42   #377
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 44
Posts: 22,844
Quote:
Originally Posted by Kalamatee View Post
Hi Toni - can you clarify for me if the new bridgeboard code supports anything better than a 386 .. or can it also simulate the modified A2386SX boards as discussed in http://aminet.net/package/misc/emu/BBCpuUpgrde1.0 ?
http://eab.abime.net/showpost.php?p=...9&postcount=69
Toni Wilen is offline  
Old 26 August 2018, 09:44   #378
AnnaWu
Registered User
AnnaWu's Avatar
 
Join Date: Dec 2012
Location: Germany
Posts: 561
Quote:
Originally Posted by AMIGASYSTEM View Post
What does it mean "WfW", someone can tell me why HardFile "VGA IDE Primary HDD Boot WfW" they work well with "AT IDE Primary (86)" while i HardFile "XTIDE Universal BIOS HD" they are not support system boot "AT IDE Primary (86)"?
WfW = Windows for Workgroups 3.11
The rest is not clear for me. IDE Primary and XTIDE Universal are completely different.
Attached Thumbnails
Click image for larger version

Name:	WinUAE.png
Views:	36
Size:	29.1 KB
ID:	59517  
Attached Files
File Type: uae A2386SX VGA IDE Primary 270MB HDD GD5429 WfW CD-ROM.uae (14.1 KB, 13 views)

Last edited by AnnaWu; 26 August 2018 at 10:00.
AnnaWu is offline  
Old 26 August 2018, 10:01   #379
Zilog
Registered User

 
Join Date: May 2014
Location: Italy
Posts: 235
Quote:
Originally Posted by Toni Wilen View Post
I don't see anything bridgeboard specific -> test and confirm if it happens in plain AmigaOS.

EDIT: also include winuaelog.txt from bridgeboard crash using following command line parameters: -log -scsiemulog -scsilog -logflush
I the conf uae i can't add cdrom how uae scsi.
Attached Files
File Type: uae @Amiga.3000_030.FPMhz_Os.v2.1_Win95.uae (27.2 KB, 11 views)
Zilog is offline  
Old 26 August 2018, 10:11   #380
Toni Wilen
WinUAE developer
 
Join Date: Aug 2001
Location: Hämeenlinna/Finland
Age: 44
Posts: 22,844
Quote:
Originally Posted by Zilog View Post
I the conf uae i can't add cdrom how uae scsi.
ATAPI (IDE CD) uses SCSI commands. Don't try to analyze any command line parameter names..
Toni Wilen is offline  
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools

Similar Threads
Thread Thread Starter Forum Replies Last Post
x86 Bridgeboard PC Speaker/SoundBlaster support? superfrog request.UAE Wishlist 30 09 August 2018 18:16
What is "x86 Bridgeboard VGA", and how does it work? Narf the Mouse support.WinUAE 7 22 January 2018 14:17
Indivision ECS core update 1.15 wmaciv Amiga scene 8 02 May 2017 19:30
Bridgeboard emulation (x86 CPU, for example A2286) GiuseppeC support.WinUAE 627 16 November 2016 15:42
Minimig firmware/core update Spellcoder News 1 27 April 2008 23:02

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +2. The time now is 22:39.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Page generated in 0.13648 seconds with 16 queries