Unable to open your tool "directory opus'

skeediddley · 26 November 2010, 18:01

Hi all.

Re-installing my trusty Amiga A1200 for the first time in years. I have given her a 4GB CF Hard drive, a 4GB PCMCIA CF, a new internal floppy and a Blizzard 1230 with 32meg arrives next week.

All has gone well. I have formatted 2 partitions, and installed WB3.0 onto DH0. All good! I then installed the drivers for the PCMCIA CF and Easy ADF (ADAPCMCFL from amikit) and lobbed a copy if install43_3 in the C: drive.

Thanks to the useful info on this board getting me thus far! I then installed Dopus 4.16. It all installed perfectly well, but it wont launch. I get the error message "Unable to open you tool directory opus". Life without Opus is too scary to contemplate.

Any ideas as to what could be wrong?

Cheers in advance

Khyron · 26 November 2010, 19:47

Not 100% sure if it will work, but I was having a similar problem on a specific CF card, only large files seemed to get corrupted when installing or copying, so I tried setting the maxtransfer as indicated in the following thread, and it seemed to fix things up.
http://eab.abime.net/showthread.php?t=45491

skeediddley · 27 November 2010, 13:36

Quote:

Originally Posted by Khyron

Not 100% sure if it will work, but I was having a similar problem on a specific CF card, only large files seemed to get corrupted when installing or copying, so I tried setting the maxtransfer as indicated in the following thread, and it seemed to fix things up.
http://eab.abime.net/showthread.php?t=45491

Thanks I'll give that a go.

Leandro Jardim · 04 December 2010, 03:09

I had a similar problem to this when I changed the filesystem of my hardfile to SFS, and this tip worked perfectly. Thanks you both!

26 November 2010, 18:01	#1
skeediddley Registered User Join Date: Nov 2010 Location: London Posts: 11	Unable to open your tool "directory opus' Hi all. Re-installing my trusty Amiga A1200 for the first time in years. I have given her a 4GB CF Hard drive, a 4GB PCMCIA CF, a new internal floppy and a Blizzard 1230 with 32meg arrives next week. All has gone well. I have formatted 2 partitions, and installed WB3.0 onto DH0. All good! I then installed the drivers for the PCMCIA CF and Easy ADF (ADAPCMCFL from amikit) and lobbed a copy if install43_3 in the C: drive. Thanks to the useful info on this board getting me thus far! I then installed Dopus 4.16. It all installed perfectly well, but it wont launch. I get the error message "Unable to open you tool directory opus". Life without Opus is too scary to contemplate. Any ideas as to what could be wrong? Cheers in advance

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
"Unable to open your tool 'Installer' "-Workbench 3.1	Mr B	support.Apps	7	31 March 2011 00:14
Unable to open your tool 'installer'	kursad	support.WinUAE	4	06 December 2009 19:38
unable to open your tool...	analog78	New to Emulation or Amiga scene	4	01 May 2008 22:37
unable to open your tool 'installer'	sasai	support.WinUAE	4	04 March 2007 02:58
"Unable to open your tool"	S. Campbell	support.WinUAE	31	12 September 2004 20:39

26 November 2010, 19:47	#2
Khyron Registered User Join Date: Feb 2010 Location: SnowLand, Canada Posts: 74	Not 100% sure if it will work, but I was having a similar problem on a specific CF card, only large files seemed to get corrupted when installing or copying, so I tried setting the maxtransfer as indicated in the following thread, and it seemed to fix things up. http://eab.abime.net/showthread.php?t=45491

04 December 2010, 03:09	#4
Leandro Jardim Registered User Join Date: Nov 2009 Location: Legoland Age: 45 Posts: 1,461	I had a similar problem to this when I changed the filesystem of my hardfile to SFS, and this tip worked perfectly. Thanks you both!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)