Looking for manuals for Scala IC400 and CanDO.

13 October 2010, 20:11

Hi guys,

Does anyone have an electronic copy of these manuals?
I need to know how to use SCALA InfoChannel AREXX port, to control external apps.
I could also take advantage of the CanDO manual.
Would be really gratefull if someone can help!

Regards.

lambrettadave · 13 October 2010, 21:01

isnt there any info on the disks them selfs

davideo · 14 October 2010, 17:06

Try here http://eab.abime.net/showthread.php?t=51565

They could be on the site.

Dave G

tin · 09 November 2010, 13:41

I'd repeat the request for this, I'd really like the IC500 manual if it exists. I have two (of three) A4000Ts that have an old IC500 install on them and ran some serial based network, but I have absolutely no idea how to make it work again - let alone the serial wiring needed.

I checked around and the site mentioned and the best found so far is a german IC400 manual.

gulliver · 09 November 2010, 14:46

@tin
Do you have some experience using Scala MM/IC software?
If you do, maybe I can help you work out your ScalaNet system. It has been more than twelve years, but I believe I still remember some of key aspects of it.

Just let me know if you are into it, and I will try to help you.

tin · 09 November 2010, 15:42

I have pretty good experience with Scala and making presentations on it (not that I've got a creative bone in my body) but not with the EX and network side of things. I mainly want to get the network up and running (which I understand is serial based) and see if I can make it work on serial<->IP converters, then go from there I guess.

Thanks for the offer, while i'm away for a few days coming up, I'll dig the kit out again and post here when stuff is running.

13 October 2010, 20:11	#1
mugo Posts: n/a	Looking for manuals for Scala IC400 and CanDO. Hi guys, Does anyone have an electronic copy of these manuals? I need to know how to use SCALA InfoChannel AREXX port, to control external apps. I could also take advantage of the CanDO manual. Would be really gratefull if someone can help! Regards. Last edited by mugo; 13 October 2010 at 20:12. Reason: Correct typos

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for CANDO...	astuermer	support.Apps	3	09 November 2018 20:23
CanDo v3.0	otro	request.Apps	29	24 July 2014 17:05
Scala MM400 + Manual	Phantom	support.Apps	0	11 July 2011 17:53
Scala IC 500	Pyromania	request.Apps	47	23 December 2009 20:56
Scala MM400	mbrantley	request.Apps	2	21 May 2008 15:41

13 October 2010, 21:01	#2
lambrettadave Registered User Join Date: Sep 2010 Location: south shields Posts: 140	isnt there any info on the disks them selfs

14 October 2010, 17:06	#3
davideo Amiga Tomcat Join Date: Sep 2007 Location: Boston Lincs Posts: 1,500	Try here http://eab.abime.net/showthread.php?t=51565 They could be on the site. Dave G

09 November 2010, 13:41	#4
tin Registered User Join Date: Sep 2003 Location: chester Posts: 415	I'd repeat the request for this, I'd really like the IC500 manual if it exists. I have two (of three) A4000Ts that have an old IC500 install on them and ran some serial based network, but I have absolutely no idea how to make it work again - let alone the serial wiring needed. I checked around and the site mentioned and the best found so far is a german IC400 manual.

09 November 2010, 14:46	#5
gulliver BoingBagged Join Date: Aug 2007 Location: The South of nowhere Age: 46 Posts: 2,358	@tin Do you have some experience using Scala MM/IC software? If you do, maybe I can help you work out your ScalaNet system. It has been more than twelve years, but I believe I still remember some of key aspects of it. Just let me know if you are into it, and I will try to help you.

09 November 2010, 15:42	#6
tin Registered User Join Date: Sep 2003 Location: chester Posts: 415	I have pretty good experience with Scala and making presentations on it (not that I've got a creative bone in my body) but not with the EX and network side of things. I mainly want to get the network up and running (which I understand is serial based) and see if I can make it work on serial<->IP converters, then go from there I guess. Thanks for the offer, while i'm away for a few days coming up, I'll dig the kit out again and post here when stuff is running.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)