Problem running copper master demo on A1200 - Page 2

pintcat · 14 August 2014, 10:03

Demo runs almost fine on my A1200 060@50MHz. I have a strange glitch on the so called Raster Mutation effect. Also compressing the binary with fimp or ProPack as mentioned in the readme doesn't work anymore. Anything else is just perfect.

Galahad/FLT · 14 August 2014, 10:10

Quote:

Originally Posted by StingRay

I don't discuss this any further, demo is fixed and should run fine now.

Regarding this, you knew since April (as you have posted here in this thread) that there was a problem so you could have fixed it as well. So I really do not see any problem when I do it some months later!

Anyway, as said, I don't discuss this any further.

I think I made myself clear

modrobert · 14 August 2014, 11:19

I just checked this demo on my A1200 for the first time, liked it a lot. Thanks for keeping gems like this working and updated in WHDLoad.

StingRay · 15 August 2014, 08:52

Quote:

Originally Posted by pintcat

Demo runs almost fine on my A1200 060@50MHz. I have a strange glitch on the so called Raster Mutation effect.

That's strange as the "Rasters Mutation" effect uses the same parallax bars routine as the parts before. What exactly happens, can you describe the glitch please?

Quote:

Originally Posted by pintcat

Also compressing the binary with fimp or ProPack as mentioned in the readme doesn't work anymore.

True, I've been using WHDLoad's "LoadFile" routine instead of "LoadFileDecrunch". Will be changed in the next update, thanks for reporting.

pintcat · 16 August 2014, 15:16

Attached is a picture where you can see what I mean. It looks like the bars break or separate somewhere in the middle as soon as they start tilting. Looks kind of interesting though, but it's not supposed to act like that (niggling as I am, I checked an older YouTube video to be sure

)

StingRay · 17 August 2014, 14:38

It's of course not supposed to look like that! Probably some timing problem I guess, I'll check. Thanks for reporting, new update will be available once I found the reason for this problem.

Edit: Fixed, a timing problem as expected, updated patch will be available this evening!

StingRay · 17 August 2014, 17:41

Updated patch which fixes the mentioned problems by Pintcat is now available on the WHDLoad site.

16 August 2014, 15:16	#25
pintcat Registered User Join Date: Mar 2008 Location: Berlin/Germany Posts: 226	Attached is a picture where you can see what I mean. It looks like the bars break or separate somewhere in the middle as soon as they start tilting. Looks kind of interesting though, but it's not supposed to act like that (niggling as I am, I checked an older YouTube video to be sure ) Attached Thumbnails

17 August 2014, 14:38	#26
StingRay move.l #$c0ff33,throat Join Date: Dec 2005 Location: Berlin/Joymoney Posts: 6,863	It's of course not supposed to look like that! Probably some timing problem I guess, I'll check. Thanks for reporting, new update will be available once I found the reason for this problem. Edit: Fixed, a timing problem as expected, updated patch will be available this evening! Last edited by StingRay; 17 August 2014 at 14:50.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Running Dungeon Master II IPF	ldaneels	support.Games	2	08 May 2013 18:13
Copper effect problem	Steve	support.WinUAE	3	25 June 2011 14:05
Full screen 'copper' flashing Jesus On-e' Demo only after v1.6+	prof72	support.WinUAE	5	10 August 2010 17:05
Wild Copper WB demo	oRBIT	request.Demos	2	05 March 2009 15:00
Problem installing Bloodwych's Copper Workbench	Thalor	project.ClassicWB	25	29 December 2003 18:45

14 August 2014, 10:03	#21
pintcat Registered User Join Date: Mar 2008 Location: Berlin/Germany Posts: 226	Demo runs almost fine on my A1200 060@50MHz. I have a strange glitch on the so called Raster Mutation effect. Also compressing the binary with fimp or ProPack as mentioned in the readme doesn't work anymore. Anything else is just perfect.

14 August 2014, 11:19	#23
modrobert old bearded fool Join Date: Jan 2010 Location: Bangkok Age: 56 Posts: 775	I just checked this demo on my A1200 for the first time, liked it a lot. Thanks for keeping gems like this working and updated in WHDLoad.

17 August 2014, 17:41	#27
StingRay move.l #$c0ff33,throat Join Date: Dec 2005 Location: Berlin/Joymoney Posts: 6,863	Updated patch which fixes the mentioned problems by Pintcat is now available on the WHDLoad site.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)