10 May 2019, 23:55 | #221 |
Posts: n/a
|
Any chance for crt-easymode-halation shader speed up/faster version? This is my favourite one, though it works a little too slow on my machine.
|
11 May 2019, 22:10 | #222 | |
Registered User
Join Date: May 2017
Location: EU
Posts: 342
|
Quote:
it's a pretty complex shader, i don't want to cripple it too much, but i used fast gamma in this variant, that should give it some boost. I also posted the normal version here, it should run much faster. http://eab.abime.net/showpost.php?p=...7&postcount=62 |
|
12 May 2019, 11:36 | #223 |
Posts: n/a
|
Thank you
It still is too slow though. I tried also your crt-classic shader, which looks really good on the screens, but with my setup it looks completely different and bad. I tried to use it with lowres and highres and still can't get the effects like on your screenshots. |
12 May 2019, 20:47 | #224 | |
Registered User
Join Date: May 2017
Location: EU
Posts: 342
|
Quote:
Code:
keep_aspect = 1.0 line_doubling = 0 low_resolution = 1 shader = crt-classic If you want for crt-easymode-halation (or any other shader) to run a bit faster, then you could also limit the output image a bit, assuming you are running at least 1080p by adding following to the custom configuration: Code:
scale_x = 4.0 scale_y = 4.0 |
|
05 June 2019, 04:01 | #225 |
Code Kitten
Join Date: Aug 2015
Location: Montreal/Canadia
Age: 52
Posts: 1,178
|
Has anyone managed to make these shaders work with FS UAE on Macs (latest Mojave)?
If I attempt to use them, FS UAE crashes miserably upon launching the game. |
07 June 2019, 00:51 | #226 |
Registered User
Join Date: Oct 2017
Location: São Leopoldo / Brazil
Age: 46
Posts: 206
|
No luck as of yet.
|
30 July 2019, 04:06 | #227 |
Registered User
Join Date: Jul 2019
Location: Glasgow
Posts: 3
|
Thanks for all the shaders guest.r, I've tested a few but tbh I'm happy enough with crt-guest with beam_min set to 2.0 and beam_max set to 4.0
Unfortunately, it took a while to even get to that stage as despite my best efforts I could not get them to work. I was putting the shaders into Code:
FS-UAE\Shaders Code:
FS-UAE\Data\Shaders I had another issue with how to put these in the settings, as I was adding the .shader suffix but that isn't actually required so you wouldn't write Code:
shader = crt-guest.shader Code:
shader = crt-guest |
04 August 2019, 15:37 | #228 |
Registered User
Join Date: May 2017
Location: EU
Posts: 342
|
Sure, NP. I updated the Original Post with some useful info.
http://eab.abime.net/showpost.php?p=1156121&postcount=1 Also new is that now i host some nicest shaders on Github, please check the link: https://github.com/guestrr/FS-UAE-Shaders Some new shaders are added, some improoved, so you can update without second thoughts. |
06 January 2020, 17:37 | #229 |
Registered User
Join Date: Jan 2020
Location: Barcelona
Posts: 6
|
Would it be very difficult to convert the crt-mattias shader from Retroarch into FS-UAE?
Here the link: https://github.com/libretro/glsl-sha...t-mattias.glsl I tried a lot of shaders but this shader is simply awesome, it reminds me of the screenshots of the 80's magazines. I run it together with the Retroarch P-UAE core. |
06 January 2020, 18:27 | #230 |
Registered User
Join Date: May 2017
Location: EU
Posts: 342
|
It's a nonstandard shader, which really likes some texture coordinates setups (0.0-1.0 range for source image) / non power of two textures, but i think it's a decent port.
Cheers... |
06 January 2020, 20:16 | #231 |
Registered User
Join Date: Jan 2020
Location: Barcelona
Posts: 6
|
Wow! Thanks!
It looks amazing in FS-UAE too. But I noticed some moving black bands in the image that aren't in Retroarch. I took an screenshot in FS-UAE but the black bands are gone The effect is similar to this but much less pronounced: https://i.stack.imgur.com/TvcIF.png I can see also some distortion, maybe is related with those black bands? And this is the screenshot from Retroarch: In the Retroarch screenshot the bilinear filtering is disabled. By the way, I removed the curvature and reduced the ghosting, like I did in GLSL version: ... uv = mix( uv , uv, 0.5 ); ... float ghs = 0.01; |
06 January 2020, 20:34 | #232 |
Registered User
Join Date: May 2017
Location: EU
Posts: 342
|
Is this version better? I disabled the "wobbling" effect which should originaly change with time i guess.
|
06 January 2020, 22:11 | #233 |
FS-UAE Developer
Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
Looks very good to me! Maybe I'll actually start using CRT shaders (possibly without the curvature though). Maybe I can add some features to help such shaders look better. I notice for example that when the Amiga display has a (light) border color, the left border of the curved screen becomes sharp and somewhat jagged, while the right border is blurry. This is due to texture sampling/interpolation, and the fact that there is nothing to the left of the image (on the GPU), while there is a black area to the right since the texture is bigger than the used area. This can be worked around in the shader itself probably, but could also be an idea to offset the Amiga display a bit to the right and down on the texture in FS-UAE, so that there is black data outside all edges...
|
06 January 2020, 23:02 | #234 |
Posts: n/a
|
The crt-caligari shader is my favorite from Retroarch. Quite usable for different resolutions.
|
06 January 2020, 23:35 | #235 | ||
Registered User
Join Date: May 2017
Location: EU
Posts: 342
|
Quote:
It could be done with shaders also, there is a special "corner" function which does exactly this (adds black borders around the image), much easier than coordinate checks. But if the emulator could fix this it would be great. @FRQZ Quote:
Last edited by guest.r; 07 January 2020 at 21:42. |
||
07 January 2020, 23:13 | #236 |
Registered User
Join Date: Jan 2020
Location: Barcelona
Posts: 6
|
Yes, much better! The distortion has gone.
Yet the black waves are still. Can you see them? |
07 January 2020, 23:30 | #237 |
FS-UAE Developer
Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
Based on the (look-alike) image you posted it looks like an aliasing effect, probably due to the shader not actually rendering to 1:1 display pixels. One possible explanation for that is a high-DPI display where FS-UAE runs with a lower resolution which is then rendered to a higher-res display by the windowing system. Are you using Windows or macOS? If you're running Windows, you can try to disable interface scaling (don't remember the setting's name) where you can choose between 100%, 150%, 200% etc to scale up fonts (etc). Try 100% and see if the shader looks correct? |
08 January 2020, 00:10 | #238 |
Registered User
Join Date: Jan 2020
Location: Barcelona
Posts: 6
|
Yes, it was that. Thank you!
I had 125% in the Windows 10 interface scaling, I'm in my forties Last edited by diedel; 08 January 2020 at 00:17. |
08 January 2020, 00:22 | #239 |
FS-UAE Developer
Join Date: Dec 2011
Location: Førde, Norway
Age: 43
Posts: 4,043
|
Btw, in the next FS-UAE series, this problem should go away, in-development FS-UAE version should be high-dpi aware (I hope) - so it should not matter what the scaling factor is
|
04 February 2020, 12:57 | #240 |
Registered User
Join Date: Jan 2005
Location: Portugal
Age: 42
Posts: 139
|
Some of the shaders on Retroarch are really nice, and simple scanlines just doesn't cut it anymore on FS-UAE
But the shader I use for Retroarch, CRT-Royale, seems overkill for Amiga. It really looks more like a TV instead of a monitor. What is the shader that emulates the 1084s screen the best for FS-UAE? |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Shaders | Zeraphine | support.Amiga Forever | 2 | 15 March 2020 18:46 |
Looking for dithering shaders for FS-UAE | switchblade | support.FS-UAE | 1 | 28 July 2015 18:13 |
CG Shaders | Enverex | support.FS-UAE | 2 | 05 October 2014 18:51 |
fx Shaders in WinUAE 2.6.0 | crazy46guy | support.WinUAE | 8 | 16 June 2013 14:30 |
Using shaders with FS-UAE on Ubuntu [Solved] | DaveMB | support.FS-UAE | 2 | 14 October 2012 15:46 |
|
|