[BuildLog] Vampire V2-128 received and it's just pure p0rn. - Page 10

bebek · 05 April 2016, 20:53

Quote:

Originally Posted by mfilos

Only custom ROM with sagasd.device is a viable solution the way I see it or else you'd need some sort of boot device in order to load the LoadModule sagasd.device (Floppy, IDE CF/HDD).
It's not bad for using it as a second drive but certainly in the future will get a nice speed increase outperforming the A600's IDE bus limitation.

serial eeprom connected to fpga?

Dunny · 06 April 2016, 01:26

Nice to see a sane icon system in place, but WTF are those green monstrosities in the SD card drawer?

Mrs Beanbag · 06 April 2016, 20:45

so how do i order one or two of these?

Amiga1992 · 06 April 2016, 21:01

You send a message to kipper by mail and you get into the waiting list.
http://www.kipper2k.com/updates.html

kipper2k · 09 April 2016, 17:45

Quote:

Originally Posted by Mrs Beanbag

so how do i order one or two of these?

Hi,

sorry i never replied to your pm, i am in and out quick. I will use your pm for reference so you are on the list and i will give you heads up when i am closer to getting yours done.

@thread.

I have ordered 100 boards, will take approx 2 - 3 weeks to get here, and i expect to get approx 10 - 12 done a day depending on priority etc. and once i receive this batch i will order another batch of 100... that will clear up most of the backlog as of today

gulliver · 09 April 2016, 23:57

@Kipper2k

Just out of curiosity, could you please provide the numbers of how many Vampire II boards have you built so far, and how many are in the backlog?

Thanks in advance.

kipper2k · 10 April 2016, 00:40

Quote:

Originally Posted by gulliver

@Kipper2k

Just out of curiosity, could you please provide the numbers of how many Vampire II boards have you built so far, and how many are in the backlog?

Thanks in advance.

for me over 100, with more than 200 requests and you need to add majstas numbers too. There are apparently a lot of a600s out there

gulliver · 10 April 2016, 05:24

Thank you.

This means there are quite a lot of active Amiga users. Much more than I thought.

Maybe there is some hope after all...

seb132 · 10 April 2016, 08:53

I'll be adding 1 or 2 more soon...

kolla · 15 April 2016, 21:59

Quote:

Originally Posted by Dunny

Nice to see a sane icon system in place, but WTF are those green monstrosities in the SD card drawer?

Those would be the default drawer icon of the "coloricons" ("glowicons") icon set of OS3.5+.

TuKo · 15 April 2016, 23:02

Hi guys,

I'm very happy to inform you that relnev did a new build of ScummVM RTG 1.8.0 based on what NovaCoder left as sources. Kudos to both these two guys.

It still need a bit of polishing but it already works well.

Here is a quick video of it running Sam'n'Max and Curse of Monkey Island :
[ Show youtube player ]

Link to the exe :
http://www.apollo-accelerators.com/f..._RTG_1.8.0.lha

Enjoy it and feel free to show us videos of gameplays and come to discuss it with us on IRC.

emufan · 26 April 2016, 02:37

latest minibench 8.07h contains the HappyNewYear96 virus.
KillHappy from aminet was my choice of removing it from my infected files.
I dont have an account at the Vampire Forum, so please tell them.

TuKo · 26 April 2016, 07:41

Quote:

Originally Posted by emufan

latest minibench 8.07h contains the HappyNewYear96 virus.
KillHappy from aminet was my choice of removing it from my infected files.
I dont have an account at the Vampire Forum, so please tell them.

Thanks for the information. File has been desinfected and reuploaded. Sorry for the inconvenience.

emufan · 26 April 2016, 18:57

Quote:

Originally Posted by TuKo

Thanks for the information. File has been desinfected and reuploaded. Sorry for the inconvenience.

allright, ok, np. HNY96 is kinda harmless, was easily to remove

TjLaZer · 28 April 2016, 03:47

Anxiously awaiting my board! What's going on with Picasso 96 drivers?

Reido · 29 April 2016, 11:29

Anyone tried MAME with the V2?!

cgugl · 29 April 2016, 12:44

Quote:

Originally Posted by Reido

Anyone tried MAME with the V2?!

I tried mame 0.29 on my dev board some times ago
(now the core is faster).

I had 60 fps (100% or more speed) disabling the audio...
it was possible to play with audio enabled, but with some frameskip...

the problem is to find the old games for mame 0,29... (i have only 1942 )

Sandro · 29 April 2016, 14:41

Quote:

Originally Posted by cgugl

I tried mame 0.29 on my dev board some times ago
(now the core is faster).

I had 60 fps (100% or more speed) disabling the audio...
it was possible to play with audio enabled, but with some frameskip...

the problem is to find the old games for mame 0,29... (i have only 1942 )

you must use mame 0.36 because is the classic
there is a build for 68k
0.36 roms > you can found in the web easily

kipper2k · 30 April 2016, 21:17

Update on the SD card usage in the V600, I am using some of the earlier beta drivers and my 4GB SD card is reading flawlessly at 2.1MB/s The newer drivers are working at 3.4 - 3.7MB/s so a little bit of good news

Lord Aga · 30 April 2016, 21:30

Yowza

How far from booting from SD ?

10 April 2016, 05:24	#188
gulliver BoingBagged Join Date: Aug 2007 Location: The South of nowhere Age: 46 Posts: 2,358	Thank you. This means there are quite a lot of active Amiga users. Much more than I thought. Maybe there is some hope after all... Last edited by gulliver; 10 April 2016 at 10:28.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Newly received A1200	zerohour1974	New to Emulation or Amiga scene	13	12 March 2015 02:35
Received a fake and copied OS 3.9	W4r3DeV1L	support.Other	5	26 June 2010 12:38
The Omega of hardware p0rn..?	Charlie	Hardware pics	11	12 September 2009 02:42
Hey Zetr0! some p0rn	Charlie	Hardware pics	1	16 August 2008 12:15
Just Received SWOOPER in the mail	stainy	HOL contributions	0	05 May 2006 10:55

06 April 2016, 01:26	#182
Dunny Registered User Join Date: Aug 2006 Location: Scunthorpe/United Kingdom Posts: 2,041	Nice to see a sane icon system in place, but WTF are those green monstrosities in the SD card drawer?

06 April 2016, 20:45	#183
Mrs Beanbag Glastonbridge Software Join Date: Jan 2012 Location: Edinburgh/Scotland Posts: 2,243	so how do i order one or two of these?

06 April 2016, 21:01	#184
Amiga1992 Registered User Join Date: May 2001 Location: ? Posts: 19,646	You send a message to kipper by mail and you get into the waiting list. http://www.kipper2k.com/updates.html

09 April 2016, 23:57	#186
gulliver BoingBagged Join Date: Aug 2007 Location: The South of nowhere Age: 46 Posts: 2,358	@Kipper2k Just out of curiosity, could you please provide the numbers of how many Vampire II boards have you built so far, and how many are in the backlog? Thanks in advance.

10 April 2016, 08:53	#189
seb132 French in Australia Join Date: May 2012 Location: Gold Coast Age: 52 Posts: 507	I'll be adding 1 or 2 more soon...

15 April 2016, 23:02	#191
TuKo Apollo Team Join Date: May 2014 Location: not far Posts: 381	Hi guys, I'm very happy to inform you that relnev did a new build of ScummVM RTG 1.8.0 based on what NovaCoder left as sources. Kudos to both these two guys. It still need a bit of polishing but it already works well. Here is a quick video of it running Sam'n'Max and Curse of Monkey Island : [ Show youtube player ] Link to the exe : http://www.apollo-accelerators.com/f..._RTG_1.8.0.lha Enjoy it and feel free to show us videos of gameplays and come to discuss it with us on IRC.

26 April 2016, 02:37	#192
emufan Registered User Join Date: Feb 2012 Location: #DrainTheSwamp Posts: 4,545	latest minibench 8.07h contains the HappyNewYear96 virus. KillHappy from aminet was my choice of removing it from my infected files. I dont have an account at the Vampire Forum, so please tell them.

28 April 2016, 03:47	#195
TjLaZer Registered User Join Date: Sep 2004 Location: Tacoma, WA USA Age: 52 Posts: 1,924	Anxiously awaiting my board! What's going on with Picasso 96 drivers?

29 April 2016, 11:29	#196
Reido Registered User Join Date: Feb 2013 Location: Dublin/Ireland Posts: 403	Anyone tried MAME with the V2?!

30 April 2016, 21:17	#199
kipper2k Registered User Join Date: Sep 2006 Location: Thunder Bay, Canada Posts: 4,323	Update on the SD card usage in the V600, I am using some of the earlier beta drivers and my 4GB SD card is reading flawlessly at 2.1MB/s The newer drivers are working at 3.4 - 3.7MB/s so a little bit of good news

30 April 2016, 21:30	#200
Lord Aga MI clan prevails Join Date: Jul 2010 Location: Belgrade, Serbia Posts: 1,443	Yowza How far from booting from SD ?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)