06 June 2018, 13:03 | #2121 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,944
|
Quote:
I'm assuming you're talking about the Sonnet? I only have blurry pictures to go off of but it looks like a zero ohm resistor. I would suggest verifying that elsewhere if you're doing what I think you're doing. |
|
06 June 2018, 13:18 | #2122 |
Registered User
Join Date: Nov 2016
Location: turkiye
Posts: 213
|
Thank you.
Any sonnet 7200 G4 user here? |
06 June 2018, 14:07 | #2123 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,028
|
Not me. Using different G4 cards.
|
06 June 2018, 14:50 | #2124 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,028
|
Major update in the works. Not for current users, though. Neither A1200 related.
|
06 June 2018, 16:12 | #2125 |
Registered User
Join Date: Nov 2016
Location: turkiye
Posts: 213
|
If I change my g3 with mpc7410, will I get any trouble on software side on sonnet? ( powerpc.library )
|
06 June 2018, 16:50 | #2126 |
Guru Meditating
Join Date: Jun 2014
Location: England
Posts: 2,347
|
|
06 June 2018, 17:50 | #2127 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,028
|
|
06 June 2018, 19:50 | #2128 |
Registered User
Join Date: Nov 2016
Location: turkiye
Posts: 213
|
I changed the g3 with mpc7410RX500LE
I dont know the value but I added 390 ohm to R62. Initppc adds sonnet ram to system but when I click to any ppc software nothing is happening. note: now it says powerpc cpu posibly crushed during setup. Last edited by starship; 13 October 2019 at 14:56. |
06 June 2018, 20:24 | #2129 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,944
|
|
06 June 2018, 20:29 | #2130 |
Registered User
Join Date: Nov 2016
Location: turkiye
Posts: 213
|
I tried now a jumping wire. same
|
06 June 2018, 20:31 | #2131 |
Semi-Retired
Join Date: Mar 2012
Location: Leiden / The Netherlands
Posts: 2,028
|
Dunno. You can look using a memory monitor whether the zero page is set up correctly. But the memory is actually set up by the PPC so it should be running. You are vague on ''nothing happening''. A hang or return to prompt when using CLI PPC programs?
It looks like no interrupts are generated by the north bridge. |
06 June 2018, 20:38 | #2132 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,944
|
I would suggest clocking it down to 400MHz temporarily to eliminate power issues.
|
06 June 2018, 20:39 | #2133 | |
Registered User
Join Date: Nov 2016
Location: turkiye
Posts: 213
|
Quote:
no hang or no prompt. nothing is coming when I clicking. Maybe I couldnt attach the cpu. Last edited by starship; 06 June 2018 at 20:44. |
|
06 June 2018, 20:54 | #2134 |
Registered User
Join Date: Nov 2016
Location: turkiye
Posts: 213
|
Q1 burned with short wire on R62.
This dream is over. Thank you for helping guys... Last edited by starship; 13 October 2019 at 14:56. |
06 June 2018, 21:14 | #2135 | |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,944
|
Quote:
Uh you're welcome ... Looks like the 4410 MOSFET just blew, probably too much power for her. I guess we know why Sonnet never released G4s faster than 450MHz- or we don't know anything. Other than don't listen to me. |
|
07 June 2018, 02:10 | #2136 |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
7410 does not support 3.3v IO on L2 cache
also the HRESET is different https://www.nxp.com/docs/en/application-note/AN1812.pdf Last edited by nexus; 07 June 2018 at 02:33. |
07 June 2018, 03:05 | #2137 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,944
|
The top pad of R62 goes to OVDD at T5.
The bottom pad of R62 goes to K13, VOLTDET. The VOLTDET pin position on the MPC750 360 BGA package is now an L2OVDD pin on the MPC7410 360 package. Also 11. The VOLTDET pin position on the MPC750 360-CBGA package is now an L2OVDD pin on the MPC7400 360-CBGA package. So L2OVDD got tied to OVDD, I guess. Which I believe are different, one is 2.5V the other is 2.2V or something like that. From 7400 manual: 3. To allow for future I/O voltage changes, provide the option to connect BVSEL and L2VSEL independently to either OVDD (selects 3.3v), OGND (selects 1.8v), or to HRESET (selects 2.5v). The Processor bus and L2 bus support all 3 options. (See Table 2. Input Threshold Voltage Setting) Same for 7410: To allow for future I/O voltage changes, provide the option to connect BVSEL and L2VSEL independently to either OVDD, GND, HRESET, or ¬HRESET. For the MPC7410 the L2 bus only supports 2.5- and 1.8-V options. The default selection, if L2VSEL is left unconnected, is 2.5-V operation. For the MPC7410 the processor bus supports 3.3-, 2.5-, and 1.8-V options. The default selection, if BVSEL is left unconnected, is 3.3-V operation. Refer to Table 2 for supported BVSEL and L2VSEL settings. BVSEL is pin W1. Which appears to be connected to B6 or HRESET. Which should be 2.5V. Take this with a pound of salt. Last edited by grelbfarlk; 07 June 2018 at 03:17. |
07 June 2018, 04:00 | #2138 |
Registered User
Join Date: Aug 2017
Location: USA
Posts: 728
|
just fyi sonnet used a 7400 on the G4 model also the bus is limited to 66mhz on that TSI107 on sonnet as its the slowest version
Last edited by nexus; 07 June 2018 at 04:05. |
09 June 2018, 00:10 | #2139 |
Registered User
Join Date: Dec 2015
Location: USA
Posts: 2,944
|
Happy Friday, new Dosbox_WOS 0.74 in the Zone. Faster, which is still really not very fast and with probably fresh bugs. Except in fullscreen, fullscreen is loads slower than windowed.
Last edited by grelbfarlk; 09 June 2018 at 01:11. |
09 June 2018, 21:36 | #2140 |
Registered User
Join Date: Sep 2015
Location: London, UK
Posts: 415
|
Uncle grelbfarlk, any chance of a new version of freecraft? Oh please oh please!
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
WANTED: PCI Sound Card VORTEX2 SuperQuard / SQ2500 or Turtlebeach SantaCruz pci card | keropi | MarketPlace | 12 | 15 March 2017 02:48 |
Wanted:Sonnet Technologies QuadDoubler 50 (Doubler 4000) | kronuz | MarketPlace | 0 | 16 June 2013 00:29 |
eBay : Sonnet Quaddoubler | alexh | MarketPlace | 3 | 07 May 2013 00:50 |
Overlay problem on GeForce 7200 | Leandro Jardim | support.WinUAE | 1 | 10 August 2010 15:50 |
Prometheus PCI & Voodoo 3 PCI GFX Card | Slayer | support.Hardware | 21 | 05 September 2006 10:57 |
|
|