Need a right angled molex

crazyc · 09 December 2016, 19:04

Hi All,

Due to a project I am currently undertaking I need to cram quite a lot inside my a1200's case. To aid with this I am looking for a right-angled female molex power connector/cable but all I can find are ones from the states where the shipping is more than the cost of the item. (I know this is only a small item/request but every mm will help.....)
I don't suppose anyone has a good source in the UK or nearby?
Cheers
C.

amigakit.com · 09 December 2016, 21:21

Hi

Do you have any pics of what you want and I will check if we can or something together for you. Thanks.

crazyc · 10 December 2016, 17:15

Thanks for the reply

I am looking at a few other options to reduce my cabling needs at the minute, and so will come back you when I know exactly what I want, but the SCSI bridge as a full size molex and I want to minimise the height when all wired up.
so something like :
https://www.xsfans.com/LP4EXT9-RA

which only seem to exist in the states.

idrougge · 11 December 2016, 05:00

Funny; Commodore used that on the A4000 PSU.

Daedalus · 12 December 2016, 12:57

I've seen them used on a lot of compact PCs, where there's very little space behind the drives. Perhaps you could salvage a few connectors from an old Dell unit in a recycling plant?

idrougge · 12 December 2016, 16:21

https://www.aliexpress.com/item/Blac...523090739.html

crazyc · 13 December 2016, 01:43

Quote:

Originally Posted by idrougge

https://www.aliexpress.com/item/Blac...523090739.html

Cheers. I will look around there.

Sent from my S7 Edge

09 December 2016, 19:04	#1
crazyc Registered User Join Date: May 2012 Location: Gravesend - UK Posts: 927	Need a right angled molex Hi All, Due to a project I am currently undertaking I need to cram quite a lot inside my a1200's case. To aid with this I am looking for a right-angled female molex power connector/cable but all I can find are ones from the states where the shipping is more than the cost of the item. (I know this is only a small item/request but every mm will help.....) I don't suppose anyone has a good source in the UK or nearby? Cheers C.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Foxconn DT10121 (Right angled 9 pin sub D)	christopherpm	support.Hardware	2	13 August 2013 13:24
New: PCMCIA right angled adapters	amigakit.com	MarketPlace	4	30 September 2010 23:57
Sockets Simms angled for A4000D	Cosmos	MarketPlace	13	15 March 2010 15:35
Molex Connecter wiring problem.....	THX1138	support.Hardware	5	10 April 2005 20:01
Molex adapters	Smiley	support.Hardware	3	09 March 2005 10:46

09 December 2016, 21:21	#2
amigakit.com Registered User Join Date: Aug 2004 Location: www.amigakit.com Posts: 2,029	Hi Do you have any pics of what you want and I will check if we can or something together for you. Thanks.

10 December 2016, 17:15	#3
crazyc Registered User Join Date: May 2012 Location: Gravesend - UK Posts: 927	Thanks for the reply I am looking at a few other options to reduce my cabling needs at the minute, and so will come back you when I know exactly what I want, but the SCSI bridge as a full size molex and I want to minimise the height when all wired up. so something like : https://www.xsfans.com/LP4EXT9-RA which only seem to exist in the states.

11 December 2016, 05:00	#4
idrougge Registered User Join Date: Sep 2007 Location: Stockholm Posts: 4,342	Funny; Commodore used that on the A4000 PSU.

12 December 2016, 12:57	#5
Daedalus Registered User Join Date: Jun 2009 Location: Dublin, then Glasgow Posts: 6,369	I've seen them used on a lot of compact PCs, where there's very little space behind the drives. Perhaps you could salvage a few connectors from an old Dell unit in a recycling plant?

12 December 2016, 16:21	#6
idrougge Registered User Join Date: Sep 2007 Location: Stockholm Posts: 4,342	https://www.aliexpress.com/item/Blac...523090739.html

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)