Indy ECS problems

lord of time · 15 April 2017, 09:52

Hi there, I have an issue with my indivision ecs in my A600. My old PSU was flakey so I replaced it with one of the meanwell ones and it works great no problems with the vampires HDMI output and even on the RGB port but the VGA output is full of flickering lines up and down the screen. Its driving me mad as I cant use my amiga at the moment as the lids off and I can use anything thats native video... if i swap back to the old PSU all is fine apart from it taking 2 or 3 attempts before the miggy will boot - I know my hardware combination is a tested one as I have seen other people on here use a vampire and a Indy ECS together with no issues.

15 April 2017, 09:52	#1
lord of time Banned Join Date: Mar 2016 Location: wolverhampton Posts: 153	Indy ECS problems Hi there, I have an issue with my indivision ecs in my A600. My old PSU was flakey so I replaced it with one of the meanwell ones and it works great no problems with the vampires HDMI output and even on the RGB port but the VGA output is full of flickering lines up and down the screen. Its driving me mad as I cant use my amiga at the moment as the lids off and I can use anything thats native video... if i swap back to the old PSU all is fine apart from it taking 2 or 3 attempts before the miggy will boot - I know my hardware combination is a tested one as I have seen other people on here use a vampire and a Indy ECS together with no issues.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Configuring ECS problems.	trydowave	support.Hardware	0	18 April 2016 21:33
problems with indivision ecs	systmcrsh	support.Hardware	4	26 January 2016 19:45
Indy ECS Artifacts	Dejavu	support.Hardware	3	14 September 2015 21:58
Indivision ECS noise problems	supercompman	support.Hardware	24	07 May 2014 17:14
Indivision ECS Scandoubler causing mouse problems.	barney	support.Hardware	11	23 May 2010 10:33

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)