English Amiga Board - View Single Post - Boot problem after changing Kickstart to/from 1.2

mark_k · 19 November 2017, 21:16

OK, some configs with OCS 68000 cycle-exact here:

Code:

https://www.media!fire.com/file/98zql177z8tb30w/KS1.2_configs.zip

512KB chip: Infinite reboot loop at grey screen, resets every ~1/2 second.
512KB chip + 512KB slow: Infinite reboot loop at grey screen, reset every ~4 seconds.
512KB chip + 8MB Z2: After clicking start the insert WB disk screen appears. Press Ctrl-A-A and get reset loop (like with 512KB chip config).

Strangely none of them give the no disk present requester???

Edit: That was testing with 3.6.0b8. With 3.6.0b7 and earlier, at least the 512+8M config does boot to CLI, but you have to press Ctrl-A-A at the insert WB disk screen for it to do that.

Edit 2: With 3.6.0b7, the 512 and 512+512 configs correctly boot: no insert disk screen.
The 512+8M config shows the insert disk screen, but after pressing Ctrl-A-A it does boot.

19 November 2017, 21:16	#9
mark_k Registered User Join Date: Aug 2004 Location: Posts: 3,343	OK, some configs with OCS 68000 cycle-exact here: Code: https://www.media!fire.com/file/98zql177z8tb30w/KS1.2_configs.zip 512KB chip: Infinite reboot loop at grey screen, resets every ~1/2 second. 512KB chip + 512KB slow: Infinite reboot loop at grey screen, reset every ~4 seconds. 512KB chip + 8MB Z2: After clicking start the insert WB disk screen appears. Press Ctrl-A-A and get reset loop (like with 512KB chip config). Strangely none of them give the no disk present requester??? Edit: That was testing with 3.6.0b8. With 3.6.0b7 and earlier, at least the 512+8M config does boot to CLI, but you have to press Ctrl-A-A at the insert WB disk screen for it to do that. Edit 2: With 3.6.0b7, the 512 and 512+512 configs correctly boot: no insert disk screen. The 512+8M config shows the insert disk screen, but after pressing Ctrl-A-A it does boot. Last edited by mark_k; 19 November 2017 at 21:30.