View Single Post
Old 02 July 2020, 19:06   #5
Registered User

solarmon's Avatar
Join Date: Dec 2018
Location: UK
Posts: 1,295
Measuring the voltages with the motherboard powered should be good enough.

Anywhere where you expect continuity and it does have it is an obvious issue that needs to be resolved. So you are going about this the right way.

If there are any signs of corrosion or oxidation it needs to be cleaned up. Yes, I would reflow the pins of the connectors, and I would check the pins and traces carefully with a USB microscope.
solarmon is offline  
Page generated in 0.06840 seconds with 11 queries