English Amiga Board - View Single Post

mfilos · 29 May 2011, 16:03

As I see the whole procedure you're doing everything right.
My only difference is that I user NORMAL instead of Split & Swapped and also choose Speed ROM as well.

In the end upon compile I had the kick.rom file (512kb).
Then you can use the SplitROMImage command inside tools with the following declaration:
1> cd Remus/Tools
1> SplitROMImage RAM:kick.rom SWAP

That will give you an 0 as output and you'll see that you're gonna have 2 files HI and LO as well that you'll be burning to your programmer.

Only thing I don't know... if the MX27C4100-10 EPROMS you're using are compatible with 27C400 ones (they can be the same but I don't for sure).
Also are you sure you haven't putted them opposite way (I mean the Hi in Lo's position physical in the socket)?

29 May 2011, 16:03	#468
mfilos Paranoid Amigoid Join Date: Mar 2008 Location: Athens/Greece Age: 45 Posts: 1,978	As I see the whole procedure you're doing everything right. My only difference is that I user NORMAL instead of Split & Swapped and also choose Speed ROM as well. In the end upon compile I had the kick.rom file (512kb). Then you can use the SplitROMImage command inside tools with the following declaration: 1> cd Remus/Tools 1> SplitROMImage RAM:kick.rom SWAP That will give you an 0 as output and you'll see that you're gonna have 2 files HI and LO as well that you'll be burning to your programmer. Only thing I don't know... if the MX27C4100-10 EPROMS you're using are compatible with 27C400 ones (they can be the same but I don't for sure). Also are you sure you haven't putted them opposite way (I mean the Hi in Lo's position physical in the socket)?