[fxgogo]

So I was setting up the display and filter configurations for my Amiga 1200 and I noticed that depending on which application is running, it has a different position on the screen. Sometimes it is actually cut off.

I have uploaded 5 images that illustrates what I am seeing.


Amiga Alignments_00000.jpg shows the floppy disk waiting screen. This actually shows perfect alignment with a full digital PAL SD raster of 788x576. So things look good here.

Amiga Alignments_00001.jpg shows my workbench which is PAL Hires Laced with oversan set to max res of 724x566. You can see a slight offset to the left here.

Amiga Alignments_00002.jpg show Deluxe Paint in 640x512 mode. The offset is a lot more dramatic.

Amiga Alignments_00003.jpg has Deluxe Paint again but with the resolution set to 736x588. This is actually an expected result as the document size is larger than the display, however it is still shifted to the left.

Amiga Alignments_00004.jpg now does something completely different with Imagine 2. It is shifted all the way to the right and bottom of the screen.


I would not expect this when running this on my real A1200. I certainly don't remember it happening. Is this a setting that I am missing or is there something more fundamental going on?