View Single Post
Old 23 December 2020, 10:04   #1
Gilloo
Registered User
 
Join Date: Nov 2010
Location: Grenoble, Isère, Rhône-Alpes, France, Europe, Earth
Posts: 221
[resolved] WinUAE 4.4.0, A2091 and gururom (and also gvp, dkb rapidfire)

Hi all,
I'm trying to use emulated cards with WinUAE

How to get A2091 omniscsi 6.14 ROM image
http://babel.de/amiga.html#sys
=> gururom2091.bin (32kB)

My configuration WINUAE 4.4.0 (2020.07.01)
68000
Fastest possible
Full ECS
KS ROM 40.63 (3.1)
2MB chip
4MB Z2 Fast

Expansion
SCSI controllers
A590/A2091 (Commodore) then select the gururom2091.bin file

return to RAM
Z2FastRam #1 [4096K] (A590/A2091)
(fine!)
CD & Hard drives
First drive DH0 => on a well working Workbench 3.1
Second drive A590/A2091:0 HDF => on a 80 MB hdf with RDB (was working well with uaehf.device)

Then start ...

ShowConfig
PROCESSOR: CPU 68000
CUSTOM CHIPS: ECS PAL Agnus (id=$0020), ECS Denise (id=$00FC)
VERS: Kickstart version 40.63, Exec version 40.10, Disk version 40.42
RAM: Node type $A, Attributes $605 (FAST), at $200000-$5FFFFF (4.0 meg)
Node type $A, Attributes $703 (CHIP), at $400-$1FFFFF (~2.0 meg)
BOARDS:
CBM A590/A2091 HD controller: Prod=514/2($202/$2) (@E90000 64K)
CBM A2052/58.RAM | 590/2091.RAM: Prod=514/10($202/$A) (@$200000 4meg Mem)
Board + ROM (HD?) (unidentified): Prod=2011/82($7DB/$52) (@$EA0000 64K)
Board (unidentified): Prod=2011/4($7DB/$4) (@$F00000 64K)

SysInfo
Devices
omniscsi V1.14

HDToolBox
SCSI_DEVICE_NAME=omniscsi.device
but nothing is detected.

What is going wrong ?
The RAM is well selected, but nothing for the harddrive.
Many thanks in advance.

Last edited by Gilloo; 04 January 2021 at 18:43.
Gilloo is offline  
 
Page generated in 0.05395 seconds with 11 queries