English Amiga Board - View Single Post - An ASM Environment for ECS/OCS development

jman · 05 November 2011, 11:15

I tried booting a virtual A600 (kick 37.350, wb 37.71), copied devpac 3.14 and devpac 3.18 onto HD and experienced the same issues (flash window in the first case, machine hanging in the latter).

Tried to boot from WB floppies directly, same results.

Then tried to boot the very same virtual machine using DevPac 3.14 floppy (3.18 is not bootable), the About window shows kick 37.350, wb 37.67, everything works.

No problem whatsoever with my A4000 (kick 3.0).

So I suspect the DevPac floppy upon boot sets something needed (s/startup-sequence). Don't have time to investigate further, though.

05 November 2011, 11:15	#18
jman Registered User Join Date: Nov 2010 Location: . Posts: 351	I tried booting a virtual A600 (kick 37.350, wb 37.71), copied devpac 3.14 and devpac 3.18 onto HD and experienced the same issues (flash window in the first case, machine hanging in the latter). Tried to boot from WB floppies directly, same results. Then tried to boot the very same virtual machine using DevPac 3.14 floppy (3.18 is not bootable), the About window shows kick 37.350, wb 37.67, everything works. No problem whatsoever with my A4000 (kick 3.0). So I suspect the DevPac floppy upon boot sets something needed (s/startup-sequence). Don't have time to investigate further, though. Last edited by jman; 06 November 2011 at 11:11. Reason: time...